Polylactic Acid 3D Printed Drill Guide for Dental Implants Using CBCT

2017 ◽  
Vol 68 (2) ◽  
pp. 341-342 ◽  
Author(s):  
Ovidiu Tiberiu David ◽  
Camelia Szuhanek ◽  
Robert Angelo Tuce ◽  
Andra Patricia David ◽  
Marius Leretter
Keyword(s):  
Polylactic Acid ◽  
Dental Implants ◽  
Computer Aided Design ◽  
Computer Assisted ◽  
Occlusal Contact ◽  
Surgical Guide ◽  
Cad Cam ◽  
Design Production ◽  
3D Printed ◽  
Aided Design

The aim of the present study is to describe a method for setting up a polylactic acid (PLA) 3D printed surgical guide for the minimally invasive insertion of dental implants using the CBCT (cone beam computed tomography) acquisition without occlusal contact and CAD � CAM (computer-aided design/computer assisted manufacture) software for its design, production and testing.

Clinical Application of Stereolithographic Surgical Guide With a Handpiece Guidance Apparatus: A Case Report

2012 ◽  
Vol 38 (5) ◽  
pp. 603-609 ◽  
Author(s):  
Oguz Ozan ◽  
Emre Seker ◽  
Sevcan Kurtulmus-Yilmaz ◽  
Ahmet Ersan Ersoy
Keyword(s):  
Dental Implants ◽  
Computer Aided Design ◽  
Surgical Guide ◽  
3 Dimensional ◽  
Optical Scanner ◽  
System A ◽  
Surgical Guides ◽  
Cad Cam ◽  
Guide System ◽  
Aided Design

The success of implant-supported restorations depends on the treatment planning and the transfer of planning through the surgical field. Recently, new computer-aided design and manufacturing (CAD/CAM) techniques, such as stereolithographic (SLA) rapid prototyping, have been developed to fabricate surgical guides to improve the precision of implant placement. The objective of the present case is to introduce a recently developed SLA surgical guide system into the rehabilitation of a 62-year-old male patient with mandibular edentulism. After obtaining a cone-beam computerized tomography (CBCT) scan of the mandible with a radiographic template, the images were transferred into a 3-dimensional (3D) image-based software for implant planning. The StentCad Beyond SLA surgical guide system, which is a combination of a currently used surgical template with pilot hollows and a surgical handpiece guidance apparatus, was designed to transfer a preoperatively defined implant position onto the surgical site without any drill-surgical guide contact. For the fabrication of this system, a surgical handpiece was scanned by a laser optical scanner and a mucosa-supported surgical guide was designed according to the patient's 3D model, which was attained from the CBCT images. Four dental implants were inserted through the SLA surgical guide system by a torque-controlled surgical handpiece to the interforaminal region via a flapless surgical procedure. Implants were assessed 3 months after surgery, and an implant-retained mandibular overdenture was fabricated. The present case emphasizes that CAD/CAM SLA surgical guides, along with CBCT images and scanning data, may help clinicians plan and place dental implants.

scholarly journals Chairside CAD/CAM Materials: Current Trends of Clinical Uses

Biology ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1170
Author(s):  
Giulio Marchesi ◽  
Alvise Camurri Piloni ◽  
Vanessa Nicolin ◽  
Gianluca Turco ◽  
Roberto Di Lenarda
Keyword(s):  
Clinical Outcome ◽  
Computer Aided Design ◽  
Fabrication Process ◽  
Computer Assisted ◽  
Current Trends ◽  
Computer Aided ◽  
Restorative Materials ◽  
Cad Cam ◽  
Aided Design

Restorative materials are experiencing an extensive upgrade thanks to the use of chairside Computer-aided design/computer-assisted manufacturing (CAD/CAM) restorations. Therefore, due to the variety offered in the market, choosing the best material could be puzzling for the practitioner. The clinical outcome of the restoration is influenced mainly by the material and its handling than by the fabrication process (i.e., CAD/CAM). Information on the restorative materials performances can be difficult to gather and compare. The aim of this article is to provide an overview of chairside CAD/CAM materials, their classification, and clinically relevant aspects that enable the reader to select the most appropriate material for predictable success.

scholarly journals Computer-Assisted Mandibular Reconstruction using a Patient-Specific Reconstruction Plate Fabricated with Computer-Aided Design and Manufacturing Techniques

2014 ◽  
Vol 7 (2) ◽  
pp. 158-166 ◽  
Author(s):  
Frank Wilde ◽  
Carl-Peter Cornelius ◽  
Alexander Schramm
Keyword(s):  
Computer Aided Design ◽  
Mandibular Reconstruction ◽  
Patient Specific ◽  
Computer Assisted ◽  
Reconstruction Plate ◽  
Fibula Flap ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design ◽  
Five Axis

We investigated the workflow of computer-assisted mandibular reconstruction that was performed with a patient-specific mandibular reconstruction plate fabricated with computer-aided design and computer-aided manufacturing (CAD/CAM) techniques and a fibula flap. We assessed the feasibility of this technique from virtual planning to the completion of surgery. Computed tomography (CT) scans of a cadaveric skull and fibula were obtained for the virtual simulation of mandibular resection and reconstruction using ProPlan CMF software (Materialise®/DePuy Synthes®). The virtual model of the reconstructed mandible provided the basis for the computer-aided design of a patient-specific reconstruction plate that was milled from titanium using a five-axis milling machine and CAM techniques. CAD/CAM techniques were used for producing resection guides for mandibular resection and cutting guides for harvesting a fibula flap. Mandibular reconstruction was simulated in a cadaveric wet laboratory. No problems were encountered during the procedure. The plate was fixed accurately to the residual bone without difficulty. The fibula segments were attached to the plate rapidly and reliably. The fusion of preoperative and postoperative CT datasets demonstrated high reconstruction precision. Computer-assisted mandibular reconstruction with CAD/CAM-fabricated patient-specific reconstruction plates appears to be a promising approach for mandibular reconstruction. Clinical trials are required to determine whether these promising results can be translated into successful practice and what further developments are needed.

scholarly journals Clinical outcomes and Complications of CAD-CAM Fabricated Complete Dentures; An update and review

2021 ◽  
Vol 38 (SI-2) ◽  
pp. 92-97
Author(s):  
Emir YÜZBAŞIOĞLU ◽  
Yeşim ÖLÇER US ◽  
Gökhan ÖZDEMİR ◽  
Berkman ALBAYRAK
Keyword(s):  
Clinical Outcomes ◽  
Computer Aided Design ◽  
Improve Patient Care ◽  
Computer Assisted ◽  
Complete Dentures ◽  
Dental Practitioners ◽  
Cad Cam ◽  
Promising Treatment ◽  
Edentulous Patients ◽  
Aided Design

For decades, conventional complete dentures (CD) have been a promising treatment for edentulous patients. The introduction of digital technology in CD fabrication streamlines and simplifies the treatment process and offers new and specific applications for the completely edentulous patients. Computer-aided design/computer-assisted manufactured (CAD/CAM) CD protocols can improve efficiency and offer specific applications in specific situations to improve patient care, satisfaction, and convenience. The aim of this review is to assess and evaluate the clinical outcomes and complication of CAD/CAM fabricated CD systems and to provide information about currently available systems for dental practitioners.

scholarly journals Strategic Use of CAD-CAM Interim Restoration for the Recovery of the Vertical Dimension of Occlusion in the Posterior Partially Edentulous Jaw

2020 ◽  
Vol 10 (21) ◽  
pp. 7735
Author(s):  
Hai Yen Mai ◽  
Jae-Min Seo ◽  
Jae-Kwang Jung ◽  
Du-Hyeong Lee
Keyword(s):  
Case Report ◽  
Computer Aided Design ◽  
Vertical Dimension ◽  
Posterior Region ◽  
Occlusal Contact ◽  
Dental Prostheses ◽  
Computer Aided ◽  
Cad Cam ◽  
Fixed Dental Prostheses ◽  
Aided Design

Occlusal contact loss occasionally occurs following the placement of implant-supported fixed dental prostheses in the posterior region. This complication is caused by the change in the vertical dimension of occlusion after the recovery of mastication. The change is probably related to the prosthesis sinking phenomenon and previous mandibular dislocation. The use of interim prostheses could help re-establish the vertical dimension of occlusion. The definitive prostheses can then be accurately fabricated using digital techniques in the newly established vertical dimension. In this case report, we introduce a protocol incorporating a computer-aided design and computer-aided manufacturing (CAD-CAM) interim prosthesis and digital techniques to minimize the occurrence of unexpected initial occlusal changes in the prosthetic treatment of implant-supported prostheses in the posterior region.

scholarly journals Composite vs Ceramic Computer-aided Design/Computer-assisted Manufacturing Crowns in Endodontically Treated Teeth: Analysis of Marginal Adaptation

2013 ◽  
Vol 38 (6) ◽  
pp. 663-673 ◽  
Author(s):  
A Ramírez-Sebastià ◽  
T Bortolotto ◽  
M Roig ◽  
I Krejci
Keyword(s):  
Computer Aided Design ◽  
Computer Assisted ◽  
Marginal Adaptation ◽  
Crown Group ◽  
Endodontically Treated Teeth ◽  
Full Coverage ◽  
Computer Aided ◽  
Cad Cam ◽  
Group 2 ◽  
Aided Design

SUMMARY Objectives To compare the marginal adaptation between ceramic and composite CEREC crowns in endodontically treated teeth restored with endocrowns or with a short or a long post. Methodology Forty-eight intact maxillary incisors were used. After endodontic treatment, the crowns were sectioned 2 mm coronally to the cemento-enamel junction, which provided a ferrule of 2 mm. The prepared teeth were divided randomly into six groups (n=8). Group 1 was restored with a large fiberglass post, composite core, and ceramic full-coverage computer-aided design/computer-assisted manufacturing (CAD-CAM) crown. Group 2 was restored with a short fiberglass post, composite core, and ceramic full-coverage CAD-CAM crown. Group 3 was restored with a large fiberglass post, composite core, and composite full-coverage CAD-CAM crown (LPCpr). Group 4 was restored with a short fiberglass post, composite core, and composite full-coverage CAD-CAM crown (SPCpr). Groups 5 and 6 were restored with ceramic and composite CEREC machined endocrowns, respectively (EndoCer and EndoCpr). The restored teeth were loaded thermomechanically in a computer-controlled chewing machine. Impressions of each restoration were made in a polyvinylsiloxane material before and after loading. Gold-coated epoxy replicas were prepared for scanning electron microscopy examination at 200× magnification. Results Loading had a statistically significant effect (p<0.05) on the percentage of “continuous margin” in all groups. The LPCpr, SPCpr, and EndoCpr groups showed the highest percentage of continuous margin initially and after loading. The effect of the different post lengths on marginal adaptation was not significant (p>0.05). Conclusion CAD-CAM crowns fabricated from millable composite resin blocks (Paradigm MZ100) offer a superior option to all-ceramic crowns (IPS Empress CAD).

Robotics and the Automated Factory

1983 ◽  
Vol 27 (5) ◽  
pp. 391-391
Author(s):  
H. McIlvaine Parsons
Keyword(s):  
Human Factors ◽  
Computer Aided Design ◽  
Industrial Robots ◽  
Computer Assisted ◽  
Industrial Automation ◽  
Computer Aided ◽  
Cad Cam ◽  
Industrial Productivity ◽  
Aided Design ◽  
Hostile Environments

Although automation in manufacturing is by no means novel, only recently have such manifestations as increasing use of robots and CAD/CAM (Computer-Aided Design/Computer-Assisted Manufacturing) involved human factors scientists/practitioners. This panel session suggests how these can contribute to industrial productivity by examining and recommending suitable divisions of labor between automation and workers and ways to improve interactions between them. For the most part these considerations have been sadly lacking in both technical and popular discussions about industrial robots. Five panelist will approach them from two perspectives: actual human factors experience in industrial automation, including robotics, and applicable experience in closely related areas, such as the use of teleoperators in hostile environments (nuclear and battlefield).

Marginal Integrity, Internal Adaptation and Compressive Strength of 3D Printed, Computer Aided Design and Computer Aided Manufacture and Conventional Interim Fixed Partial Dentures

2019 ◽  
Vol 9 (12) ◽  
pp. 1745-1750
Author(s):  
Laila Al Deeb ◽  
Khold Al Ahdal ◽  
Ghaith Alotaibi ◽  
Abdullah Alshehri ◽  
Bader Alotaibi ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Computer Aided Design ◽  
Outer Edge ◽  
Marginal Fit ◽  
Marginal Integrity ◽  
Computer Aided ◽  
Cad Cam ◽  
3D Printed ◽  
Internal Adaptation ◽  
Aided Design

The aim was to investigate the marginal fit, internal adaptation and compressive strength of SLA provisionals (SLA) in comparison to CAD-CAM and conventional (CONV) interim fixed partial dentures (FPDs). Thirty interim FPDs were fabricated using CAD-CAM technology (CAD-CAM blocks Ceramill TEMP, PMMA), conventional molding technique (CONV) (TrimPlus, PMMA) and Stereolithography (SLA) method (Form 2, Formlabs, PMMA) (n = 10). Internal adaptation (occlusal, coronal, middle and cervical) and marginal integrity (inner and outer edge) was assessed using micro-computerized tomography (Micro-CT). The failure and compressive strength was assessed by application of a static load at a crosshead speed of 1 mm/min until fracture. Data was analysed using ANOVA and multiple comparisons test. The maximum and minimum marginal mis-fit was for CONV (283.3± 98.6 nm) and CAD-CAM (68.2± 18.1 m) groups. CAD-CAM (68.2± 18.1 m) and SLA (84.7± 27.5 m) provisionals showed comparable marginal mis-fit (p > 0.05). The mean failure load was significantly higher (p < 0.05) in CAD-CAM (687.86± 46.72 N), compared to SLA (534.8± 46.1 N) and CONV (492.7± 61.8 N) samples. Compressive strength for CAD-CAM (2.44± 0.27 MPa) samples was significantly higher (p < 0.05) than SLA (1.80± 0.15 MPa) and CONV (1.65± 0.20 MPa) groups. Marginal fit and internal adaptation of SLA printed FPDs was comparable to CAD-CAM interims. Compressive strength of the SLA interims FPDs can withstand intra-oral loads.

Sign in / Sign up

Export Citation Format

Share Document