Parametric estimation of gyrotactic microorganism hybrid nanofluid flow between the conical gap of spinning disk-cone apparatus

The silver, magnesium oxide and gyrotactic microorganism-based hybrid nanofluid flow inside the conical space between disc and cone is addressed in the perspective of thermal energy stabilization. Different cases have been discussed between the spinning of cone and disc in the same or counter wise directions. The hybrid nanofluid has been synthesized in the presence of silver Ag and magnesium oxide MgO nanoparticulate. The viscous dissipation and the magnetic field factors are introduced to the modeled equations. The parametric continuation method (PCM) is utilized to numerically handle the modeled problem. Magnesium oxide is chemically made up of Mg2+ and O2- ions that are bound by a strong ionic connection and can be made by pyrolyzing Mg(OH)2 (magnesium hydroxide) and MgCO3 (magnesium carbonate) at high temperature (700–1500 °C). For metallurgical, biomedical and electrical implementations, it is more efficient. Similarly, silver nanoparticle's antibacterial properties could be employed to control bacterial growth. It has been observed that a circulating disc with a stationary cone can achieve the optimum cooling of the cone-disk apparatus while the outer edge temperature remains fixed. The thermal energy profile remarkably upgraded with the magnetic effect, the addition of nanoparticulate in base fluid and Eckert number.

Splines in vibration analysis of non-homogeneous circular plates of quadratic thickness

Mathematical model to account for non-homogeneity of plate material is designed, keeping in mind all the physical aspects, and analyzed by applying quintic spline technique for the first time. This method has been applied earlier for other geometry of plates which shows its utility. Accuracy and versatility of the technique are established by comparing with the well-known existing results. Effect of quadratic thickness variation, an exponential variation of non-homogeneity in the radial direction, and variation in density; for the three different outer edge conditions namely clamped, simply supported and free have been computed using MATLAB for the first three modes of vibration. For all the three edge conditions, normalized transverse displacements for a specific plate have been presented which shows the shiftness of nodal radii with the effect of taperness.

Development and Application of a New Type of Medical Protective Sputum Suction Respiratory Circuit

Background: At present, there are few breathing circuits that can protect health care workers. Here, we have developed a new disposable medical protective sputum suction breathing circuit.Methods：The main components of the structure of the novel medical protective breathing circuit are adapter, isolation sleeve, stop sleeve, sealing cover and sealing ring. An isolation sleeve is inserted into the conversion joint. The isolation sleeve inner sleeve has a stop sleeve with an inverted round table structure. The upper nozzle of the adapter is provided with a sealing ring tightly combined with the lower outer edge of the isolation sleeve, and a sealing cover is provided on the sealing ring.Results: The device is easy to operate and can prevent the pollution caused by sputum splashing when sucking sputum.Conclusion: The medical protective sputum suction and breathing circuit is simple in structure, easy to use, and can effectively protect medical staff.

Analysis of Mechanical Characteristics of Impeller of Spray Duster Based on ANSYS Workbench

The spray dustless machine is an important environmental protection equipment for harnessing haze. The booster impeller of the spray dustless machine is one of the decisive factors of the booster capacity. The stability of the blade directly determines the reliability of the spray duster. In this paper, ANSYS Workbench is used to analyze the mechanical characteristics of a certain type of spray dustless blade. The results show that: under the rated condition, the maximum equivalent stress of the impeller is 55.6Mpa, which is far less than the allowable stress of the impeller material 415Mpa, the maximum deformation of the circumferential position at the bottom of the blade is 1.2mm, and other deformation positions are mainly the outer edge of the blade, which can be optimized later. The interference frequency is far away from the vibration frequency of the first two modes, so resonance will not occur.

Results of researches of some rare species of raptors in the Nechkinsky National Park, Russia

This report presents the selected results of rare birds of prey studies in the Nechkinsky National Park (Udmurt Republic, Russia) 20 years after the first studies undertaken here by I.V. Karyakin in 1991–1996. The main efforts were directed to the study of the White-Tailed Eagle (Haliaeetus albicilla). At the same time, the identification of other rare species was made. The studies were carried out during short visits to the territory in 2016, 2017, 2019 and 2021. In the national park (NP), within the previously known breeding areas, 3 new nests were identified. They were 0.9–1.6 km displaced from the locations of the old nests found 20 years ago. A new breeding territory was found in the adjacent area near the border of the NP. Despite the incomplete study of the area, it is assumed to be 8-9 breeding areas in the national park, and 2–3 areas directly along its borders. The number of breeding pairs of eagles in comparison with the first half of the 1990s, according to the author, remains stable, and population increase, as happened on the Lower Kama in Tatarstan, has not been observed here. Eagles nest on large, old-growth pines and larch trees, with a distance of 130–530 m deep into the forest from the outer edge. The distance to the Kama River is 0.68 km on average (0.13–1.3 km, n=4). The minimum distance between the nearest neighbors in the Kama valley, unregulated by the reservoir, is currently 3.6 km, the average (n=3) – 3.9 km. Eagles breed occasionally on and off. No reproduction was recorded for 2–3 years. The period of egg laying extends for a month from the beginning of March to the beginning of April. The death of young birds on 6-10 kV power lines was revealed, as a result, the owners were obliged to equip the power lines with bird protection devices. White-Tailed Eagle nestlings were ringed with colored rings. Two repeated observations were obtained from the lower reaches of Kama. The Greater Spotted Eagle (Aquila clanga) continues to inhabit the National Park, which is confirmed by the meetings of adult birds. There has been two-three times population of the Peregrine Falcon (Falco peregrinus) in comparison with the first half of the 1990s. Breeding of this falcon was found on 2 territories with a distance of 16.5 km between them.

Thermal resistance of building envelopes with heat-conducting elements in summer period

The analysis of the current methods and techniques of solving the problem of heat resistance of building envelopes with heat-conducting elements shows the solution of a onedimensional problem of heat resistance. One of the possible methods for determining the temperature fluctuation amplitude on the inner surface of the building envelopes with heatconducting elements is the modeling of non-stationary temperature conditions in the computer program. However, this solution causes great difficulties, as it transfers the specified calculation from engineering to scientific and cannot be recommended for practical application. The second method of solving this problem is the application of the convergence coefficient, which can be obtained empirically. The selection of the convergence coefficient allows for the influence of the heat-conducting elements on the weighted average surface temperature depending on the envelope configuration.The structural analysis of the building envelopes and their impact on the averaged amplitude of oscillations on the inner surface are conducted. The arrangement of heat-conducting elements at the outer edge is characterized by a negligible influence of the vibration amplitude on the averaged amplitude over the structural surface. The arrangement of heat-conducting elements greatly affects the heat-conducting elements. According to the comparative analysis, the convergence coefficient is preferable in harmonics of the average temperature fluctuations on the inner surface.

Two New Species of Pristimantis (Anura: Strabomantidae) from Amazonas Department in Northeastern Peru

We describe two new species of terrestrial-breeding frogs in the genus Pristimantis from the Andes of northeastern Peru, Amazonas Department. Both species share several characters with other congeners from northern Peru, such as the presence of prominent conical tubercles on their eyelids and heel, prominent conical tubercles along the outer edge of the tarsus, and discs on fingers and toes widely expanded. However, both species can be diagnosed from morphologically similar Pristimantis in the region. Pristimantis kiruhampatu has axillae, groins, and hidden surfaces of hindlimbs that are cherry with white minute flecks, tympanic membrane and tympanic annulus evident, conical tubercles along the edge of snout and outer edge of tibia, and \/ shaped folds in the scapular region. Pristimantis paulpittmani has yellow or dirty cream groins and hidden surfaces of hindlimbs, whitish cream irises with scattered dark brown reticulations, and a thin vertical dark brown streak at the middle of the eye, snout subacuminate with a conical tubercle at the tip, and lacks a tympanic annulus and membrane. Additionally, we provide a short description of the advertisement call of P. kiruhampatu.

Research on the Model of Interaction and Coupling Relationship between Standard System Construction and Process Management

The fundamental motivation for enterprises to build a standard system is to meet the subjective needs of the unique use nature of standards, such as benchmarking and criteria, from input to output in the baseline relationship of all their business processes. How to guess the credibility and value of the standard system requires collaborative and mature processes to mediate cognition. Firstly, this paper clarifies the philosophical relationship between standard system construction and process management by using the general system structure theory. Secondly, it systematically summarizes the interaction mechanism between the two from the perspective of methodology. Finally, it designs a conceptual model with the "human regulation" composite system as the core and the coupling between standard system construction and the outer edge of process management, and combed the three mechanism characteristics that affect the fit of the coupling model. In order to provide a new integration idea for enterprise standardization management and process management to jointly realize the optimal value utility.

[New phreatic and stygobitic hydrobiids from the Northern Apennines in Piedmont, Liguria and Emilia-Romagna (Gastropoda: Caenogastropoda: Hydrobiidae)]

Five new species of phreatic and stygobitic hydrobiids are here described for the Ligurian- Piedmontese and Emilian Apennines. Two species belong to the genus Alzoniella: Alzoniella borberensis n. sp., endemic to the sub-basin of the Borbera and Spinti streams, and to the lower stretch of the Scrivia stream, in the province of Alessandria, and Alzoniella isoensis n. sp., limited to the middle course of the Scrivia stream and to the basin of the Polcevera stream, on the Tyrrhenian sector of the Genoa province. Three species belong to the genus Fissuria: Fissuria globosa n. sp., widespread throughout the sub-basin of the Scrivia stream (Genoa and Alessandria provinces), as well as in other Apennine watercourses of the provinces of Alessandria, Piacenza, Parma and Reggio Emilia; Fissuria varicosa n. sp., present in the same area of Alzoniella borberensis n. sp., but also found in the Nure and Arda streams (Piacenza province) and in the Stirone stream (Parma province), and Fissuria sossoi n. sp., limited to the sub-basin of the Stura di Ovada streams (Genoa province). The first species, assigned to the genus Alzoniella Giusti & Bodon 1984 based on its anatomical characters, has a shell with peristome detached from the last whorl, such as that of other phreatic species already known for eastern Liguria and central Italy, but differs from these in the shorter shell. The shape of the shell of A. borberensis n. sp. resembles that of other crenal or stygobitic species, widespread in northern Italy. A. isoensis n. sp., is very similar to A. borberensis, although the peristome is not sinuous superiorly on the outer edge of the shell, but differs sharply in the anatomical characters. The other taxa with valvatoid shells here described, can be ascribed to the genus Fissuria Boeters 1981 based on their anatomical characters, and show some peculiarities of the male genital tract that distinguish them from the other congeneric species so far known for southern Europe. The three new species of Fissuria differ mainly in the characters of the shell, more or less globose in F. globosa n. sp., more conical in F. sossoi n. sp. and more flattened in F. varicosa n. sp.; the latter is also characterized by the presence of a marked varix behind the peristome. Altogether, these new species can be defined as phreatic, as they colonize groundwater near watercourses; only A. isoensis n. sp. has a wider ecology, as it also lives in karst groundwater and groundwater in rocks permeable by fracking. [Article in Italian]