Fiber-optic acoustic emission sensors with dual Fabry-Perot interferometric cavities

2015 ◽  
Vol 23 (11) ◽  
pp. 3069-3076
Author(s):  
赵江海 ZHAO Jiang-hai ◽  
章小建 ZHANG Xiao-jian
2021 ◽  
pp. 18-29
Author(s):  
A. N. Seryeznov ◽  
L. N. Stepanova ◽  
S. I. Kabanov ◽  
I. S. Kabanov ◽  
V. V. Chernova ◽  
...  

The issues are considered of acoustic emission (AE) signals location generated by various simulators (Su–Nielsen, electronic simulator, metal balls of various diameter from 0.5 to 1.5 mm, dropped from different heights). Signals generated by built-in electronic simulator with a frequency of 1 Hz location is analyzed performed by an antenna consisting of two Fabry–Perot fiber-optic sensors (FOS) and two piezoelectric transducers, mounted on samples made of duralumin and T800 carbon fiber. A carbon fiber reinforced plastic sample with the defined above antenna mounted was tested with a VEDS-10 vibration stand. AE signals were registered under the vibration frequency of 20…50 Hz in the acceleration range of 0.3…0.8g. The influence of the time drift recorded by the piezoelectric transducers on the measurement results is determined. It was found that the time drift was not recorded by fiber-optic FOS sensors, but their sensitivity is more than 14 times less than that of piezoelectric transducers.


2000 ◽  
Author(s):  
Jason W. Borinski ◽  
Richard L. Clark, Jr. ◽  
A. Paige C. Furrow ◽  
John C. Duke, Jr. ◽  
Michael R. Horne

Sign in / Sign up

Export Citation Format

Share Document