A Study on the Convective Heat Transfer in Micro Heat Exchanger Embedded in Stacked Multi-Chip Modules

2004 ◽  
Vol 28 (6) ◽  
pp. 774-782
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Micro Heat Exchanger

Analysis of laminar convective heat transfer in micro heat exchanger for stacked multi-chip module

2005 ◽  
Vol 11 (11) ◽  
pp. 1176-1186 ◽  
Author(s):  
Moon Koo Kang ◽  
Joong Han Shin ◽  
Hae-Hyung Lee ◽  
Kukjin Chun
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Micro Heat Exchanger

Numerical Investigation of Convective Heat Transfer on a Dynamic Wall Heat Exchanger With Varying Amplitude and Frequency

2021 ◽  
Author(s):  
M. Habibur Rahman ◽  
Emdadul Haque Chowdhury ◽  
Didarul Ahasan Redwan ◽  
Hasib A. Prince ◽  
M. Ruhul Amin
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Convective Heat Transfer ◽  
Numerical Investigation ◽  
Convective Heat

scholarly journals Experimental Study of Forced Convective Heat Transfer in a Coiled Flow Inverter Using TiO2–Water Nanofluids

2020 ◽  
Vol 10 (15) ◽  
pp. 5225
Author(s):  
Barbara Arevalo-Torres ◽  
Jose L. Lopez-Salinas ◽  
Alejandro J. García-Cuéllar
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Reynolds Numbers ◽  
Working Fluid ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Convective Thermal ◽  
Convective Heat Transfer Coefficients

The curved geometry of a coiled flow inverter (CFI) promotes chaotic mixing through a combination of coils and bends. Besides the heat exchanger geometry, the heat transfer can be enhanced by improving the thermophysical properties of the working fluid. In this work, aqueous solutions of dispersed TiO2 nanometer-sized particles (i.e., nanofluids) were prepared and characterized, and their effects on heat transfer were experimentally investigated in a CFI heat exchanger inserted in a forced convective thermal loop. The physical and transport properties of the nanofluids were measured within the temperature and volume concentration domains. The convective heat transfer coefficients were obtained at Reynolds numbers (NRe) and TiO2 nanoparticle volume concentrations ranging from 1400 to 9500 and 0–1.5 v/v%, respectively. The Nusselt number (NNu) in the CFI containing 1.0 v/v% nanofluid was 41–52% higher than in the CFI containing pure base fluid (i.e., water), while the 1.5 v/v% nanofluid increased the NNu by 4–8% compared to water. Two new correlations to predict the NNu of TiO2–water nanofluids in the CFI at Reynolds numbers of 1400 ≤ NRe ≤ 9500 and nanoparticle volume concentrations ranges of 0.2–1.0 v/v% and 0.2–1.5 v/v% are proposed.

Sign in / Sign up

Export Citation Format

Share Document