Cutting Oil Purification System using Centrifugal Force

Author(s):  
Ki Soo Kim ◽  
Ji Han Hwang ◽  
Hyeon Sung An ◽  
Myeon Han Bae ◽  
Dae Won Yoo

The automated control issues of the oil purification system for an internal combustion engine are considered. A filter having polymer filter elements that are cleaned by two ultrasonic emitters controlled by a controller is assumed as a basis. Software that takes into account the nuances of the oil filter is developed. This filter is installed on the car for a long time. Replacement is not required, it is only necessary to periodically drain the sediment from the sump. Keywords ultrasonic emitter; full-flow filter; automation; oil cleaning; polymer filter element; software


Author(s):  
Gennadiy Petrovich Kicha ◽  
Liudmila Anatolievna Semeniuk

The article gives analysis of the advantages and disadvantages of cleaning engine oil in internal combustion engines by filtration and centrifugation. The principles of increasing the efficiency of fine oil purification by combining these methods are formulated. The scheme of a perspective system for fine cleaning of engine oil is presented, which most fully realizes the advantages of full-flow filtration and centrifugation for a two-circuit lubrication system of forced internal combustion engines. The operating conditions of diesel engines are shown, under which the advantages of filtration and centrifugation can be realized to the full. The indices for the specific productivity index and capacity of the centrifugal cleaner are calculated, contributing to the attainment of the minimum wear rate of the engine parts and the maximum service life of the filter elements. Prospects for the application of a full-flow fine engine oil purification system in forced engines with a sequential connection of purification units with different principles of separation of complex heterogeneous polydisperse systems, which include the products of contamination of lubrication systems, are outlined. Particularly effective is the use of the developed combined fine-cleaning system in marine diesel engines with increased rotational speed, operating on screw characteristics. The results of motor tests in the ship's trunk boosted diesels of the new combined lubrication oil fine cleaning system are reported. The results of operational tests in the marine diesel engine ДД108 (8ЧСПН 18/22) of a combined engine oil purification system have been analyzed, which combine the advantages of a full-flow filter and a centrifuge with a discharge head connected in series. The parameters of efficient regular and experienced combined engine oil cleaning system are compared with the effect on aging, wear and varnish and lacquer formation of a diesel engine.


1998 ◽  
Vol 2 (1) ◽  
pp. 67-70
Author(s):  
Akihiro C. Yamashita ◽  
Ryoichi Sakiyama ◽  
Hiroyuki Hamada ◽  
Kakuji J. Tojo

2009 ◽  
Author(s):  
Chang-Yu Wu ◽  
Brian Damit ◽  
Qi Zhang ◽  
Myung-Heui Woo ◽  
Wolfgang Sigmund ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document