Introduction: Ceramic brackets have gained increasing popularity among dental clinicians and orthodontic patients but friction is a major concern when using them. This study sought to assess the effects of diode and Nd:YAG (neodymium-doped yttrium aluminum garnet) laser irradiation on friction forces between two types of ceramic brackets and rhodium-coated esthetic archwires. Methods: Thirty polycrystalline and 30 poly-sapphire brackets were divided into 6 groups (n=10) as follows: (I) control polycrystalline brackets (no laser irradiation), (II) polycrystalline brackets subjected to diode laser irradiation, (III) polycrystalline brackets subjected to Nd:YAG laser irradiation, (IV) control poly-sapphire brackets (no laser irradiation), (V) poly-sapphire brackets subjected to diode laser irradiation, and (VI) poly-sapphire brackets subjected to Nd:YAG laser irradiation. The bracket slots were laser-irradiated on a custom-made table. Sixty 5-cm pieces of rhodium-coated archwires were used for the friction test in a universal testing machine at a speed of 10 mm/min. Ten brackets from the six groups underwent scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDX). Results: The frictional resistance value of polycrystalline brackets was significantly higher than that of poly-sapphire brackets, irrespective of laser type (P<0.05). Irradiation of diode and Nd:YAG lasers, compared with the control group, had no significant effect on friction, irrespective of bracket type (P>0.05). Conclusion: It appears that diode and Nd:YAG laser irradiation cannot significantly decrease the friction. Future studies are warranted on different laser types with variable exposure.
Comparison of 10 cm and 50 cm Long Iodine Cells in Iodine-Stabilized Diode Laser-Pumped Nd:YAG Laser at 532 nm