scholarly journals Testing alternative designs for a roadside animal detection system using a driving simulator

2015 ◽  
Vol 11 ◽  
pp. 61-77 ◽  
Author(s):  
Molly K. Grace ◽  
Daniel J. Smith ◽  
Reed F. Noss
2020 ◽  
Vol 10 (8) ◽  
pp. 2890
Author(s):  
Jongseong Gwak ◽  
Akinari Hirao ◽  
Motoki Shino

Drowsy driving is one of the main causes of traffic accidents. To reduce such accidents, early detection of drowsy driving is needed. In previous studies, it was shown that driver drowsiness affected driving performance, behavioral indices, and physiological indices. The purpose of this study is to investigate the feasibility of classification of the alert states of drivers, particularly the slightly drowsy state, based on hybrid sensing of vehicle-based, behavioral, and physiological indicators with consideration for the implementation of these identifications into a detection system. First, we measured the drowsiness level, driving performance, physiological signals (from electroencephalogram and electrocardiogram results), and behavioral indices of a driver using a driving simulator and driver monitoring system. Next, driver alert and drowsy states were identified by machine learning algorithms, and a dataset was constructed from the extracted indices over a period of 10 s. Finally, ensemble algorithms were used for classification. The results showed that the ensemble algorithm can obtain 82.4% classification accuracy using hybrid methods to identify the alert and slightly drowsy states, and 95.4% accuracy classifying the alert and moderately drowsy states. Additionally, the results show that the random forest algorithm can obtain 78.7% accuracy when classifying the alert vs. slightly drowsy states if physiological indicators are excluded and can obtain 89.8% accuracy when classifying the alert vs. moderately drowsy states. These results represent the feasibility of highly accurate early detection of driver drowsiness and the feasibility of implementing a driver drowsiness detection system based on hybrid sensing using non-contact sensors.


Vehicles ◽  
2020 ◽  
Vol 2 (3) ◽  
pp. 491-506
Author(s):  
Ehsan Sadraei ◽  
Richard Romano ◽  
Samantha Jamson ◽  
Gustav Markkula ◽  
Andrew Tomlinson ◽  
...  

Testing of vehicle design properties by car manufacturers is primarily performed on-road and is resource-intensive, involving costly physical prototypes and large time durations between evaluations of alternative designs. In this paper, the applicability of driving simulators for the virtual assessment of ride, steering and handling qualities was studied by manipulating vehicle air suspension ride height (RH) (ground clearance) and simulator motion platform (MP) workspace size. The evaluation was carried out on a high-friction normal road, routinely used for testing vehicle prototypes, modelled in a driving simulator, and using professional drivers. The results showed the differences between the RHs were subjectively distinguishable by the drivers in many of the vehicle attributes. Drivers found standard and low RHs more appropriate for the vehicle in terms of the steering and handling qualities, where their performance was deteriorated, such that the steering control effort was the highest in low RH. This indicated inconsistency between subjective preferences and objective performance and the need for alternative performance metrics to be defined for expert drivers. Moreover, an improvement in drivers’ performance was observed, with a reduction of steering control effort, in larger MP configurations.


2019 ◽  
Vol 33 (13) ◽  
pp. 1093-1106 ◽  
Author(s):  
William H. S. Antônio ◽  
Matheus Da Silva ◽  
Rodrigo S. Miani ◽  
Jefferson R. Souza

2021 ◽  
Author(s):  
Rahim Soleymanpour ◽  
Hossein Hamidi Shishavan ◽  
Jae-Sang Heo ◽  
Insoo Kim

Sign in / Sign up

Export Citation Format

Share Document