In the drilling operation of well OP-002 which is located in the North Sumatra Basin at a depth interval of 2887 - 3186 m occurred partial loss, and caving at a depth interval of 500 - 1650 m, where the drilling problem is caused by the use of inappropriate mud weight. Safe mud window analysis is carried out by processing well log data to build PPFG (Pore Pressure Fracture Gradient) and 1D Geomechanics model using several calculation methods. Furthermore, the results of the calculation of pore pressure and fracture gradient are validated with well test data from the well OP-002, so the safe mud window can be determined, and can be used as a basis in the analysis of the drilling problems that occur. The optimum mud weight can minimize wellbore instability, with a limit value that must be greater than the collapse pressure, but not exceeding the minimum insitu stress limit. From the results of the mud safe window analysis, it can be concluded that at a depth interval of 500 - 1650 m caving occurs, because the density value used is smaller than the shear failure gradient, and at a depth interval of 1619 - 2829 m, the density value used is greater than Shmin. To overcome this problem, a mud wight with a safe mud window concept is recommended, namely the selection of the optimum mud weight to be used must be greater than the pore pressure and shear failure gradient and does not exceed the minimum horizontal stress and fracture gradient values.
Evaluation of Mud Weight Using Safe Mud Window Concept Based on Well Log Data: A Case Study of Well OP-002 in the North Sumatra Basin Area, Indonesia