Ethernet Passive Optical Networks

2009 ◽  
pp. 482-488
Author(s):  
Mário M. Freire ◽  
Paulo P. Monteiro ◽  
Henrique J.A. da Silva ◽  
José Ruela
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Low Cost ◽  
Optical Network ◽  
Cost Effective ◽  
Passive Optical Networks ◽  
Multipoint Control ◽  
Upstream Direction ◽  
Working Groups ◽  
Ethernet Passive Optical Networks

Recently, Ethernet Passive Optical Networks (EPONs) have received a great amount of interest as a promising cost-effective solution for next-generation high-speed access networks. This is confirmed by the formation of several fora and working groups that contribute to their development, namely the EPON Forum (http://www. ieeecommunities.org/epon), the Ethernet in the First Mile Alliance (http://www.efmalliance.org), and the IEEE 802.3ah working group (http://www.ieee802. org/3/efm), which is responsible for the standardization process. EPONs are a simple, inexpensive, and scalable solution for high-speed residential access capable of delivering voice, high-speed data, and multimedia services to end users (Kramer, Mukherjee, & Maislos, 2003; Kramer & Pesavento, 2002; Lorenz, Rodrigues, & Freire, 2004; McGarry, Maier, & Reisslein, 2004; Pesavento, 2003). An EPON combines the transport of IEEE 802.3 Ethernet frames over a low-cost and broadband point-to-multipoint passive optical fibre infrastructure connecting the optical line terminal (OLT) located at the central office to optical network units (ONUs) usually located at the subscriber premises. In the downstream direction, the EPON behaves as a broadcast and select shared medium, with Ethernet frames transmitted by the OLT reaching every ONU. In the upstream direction, Ethernet frames transmitted by each ONU will only reach the OLT, but an arbitration mechanism is required to avoid collisions. This article provides an overview of EPONs focused several issues: EPON architecture, multipoint control protocol (MPCP), quality of service (QoS), and operations, administration, and maintenance (OAM) capability of EPONs.

Ethernet Passive Optical Networks

2011 ◽  
pp. 283-289
Author(s):  
Mário M. Freire ◽  
Paulo P. Monteiro ◽  
Henrique J.A. da Silva ◽  
Jose Ruela
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Low Cost ◽  
Optical Network ◽  
Cost Effective ◽  
Passive Optical Networks ◽  
Upstream Direction ◽  
Working Groups ◽  
Optical Line ◽  
Ethernet Passive Optical Networks

Recently, Ethernet Passive Optical Networks (EPONs) have received a great deal of interest as a promising cost-effective solution for next-generation high-speed access networks. This is confirmed by the formation of several fora and working groups that contribute to their development; namely, the EPON Forum (http://www.ieeecommunities.org/epon), the Ethernet in the First Mile Alliance (http://www.efmalliance.org), and the IEEE 802.3ah working group (http://www.ieee802.org/3/efm), which is responsible for the standardization process. EPONs are a simple, inexpensive, and scalable solution for high-speed residential access, capable of delivering voice, high-speed data, and multimedia services to end users (Kramer, Mukherjee &Maislos, 2003; Kramer & Pesavento, 2002; Lorenz, Rodrigues & Freire, 2004; Pesavento, 2003; McGarry, Maier & Reisslein, 2004). An EPON combines the transport of IEEE 802.3 Ethernet frames over a low-cost and broadband point-to-multipoint passive optical fiber infrastructure connecting the Optical Line Terminal (OLT) located at the central office to Optical Network Units (ONUs), usually located at the subscriber premises. In the downstream direction, the EPON behaves as a broadcast and select shared medium, with Ethernet frames transmitted by the OLT reaching every ONU. In the upstream direction, Ethernet frames transmitted by each ONU will only reach the OLT, but an arbitration mechanism is required to avoid collisions.

An ultra-dense spacing-based PON by incorporating dual drive Mach–Zehnder modulator for comb generation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Navjot Singh ◽  
Bharat Naresh Bansal
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Low Cost ◽  
Optical Network ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Passive Optical Network ◽  
Passive Optical Networks ◽  
Differential Phase Shift ◽  
High Data

Abstract Wavelength division multiplexed passive optical is promising technique to achieve a high data rate and large number of user. The notable advantages of WDM PON is the combination of reliability, cheap in cost, accessible bandwidth, high security, large optical reach and it can support large number of ONU. There are multiple approaches to achieve high-speed WDN PON using different transmission techniques. In WDM, multiple lasers are required which increase the cost of the system. To reduce cost, an optical multicarrier generation system is proposed. An economical multiple carrier generation with the incorporation of sine generator and Mach–Zehndar modulator is demonstrated. Utmost work of sine generator and dual drive modulator was to attain low cost functioning of passive optical networks. Multicarrier generation was done and replacement of laser carriers with optical multicarrier generator. Carriers were generated with the frequency spacing of 20 GHz and these carriers were used in the passive optical networks with the tone-to-noise ratio of 40 dB, amplitude difference of 1.4 dB. For the transmission of downstream in the PON, differential phase shift keying was employed at 10 Gbps data speed. Transmission distance achieved was 30 km using single-mode fiber and this was a part of optical distribution network. Optical network unit was next part after ODN and signals were received with balanced receiver. Moreover, half signal was given to intensity modulator for the signal re-modulation. Bit error rate of 10–9 was achieved at all channels in the downstream. An upstream of 10 Gbps was accomplished in the passive optical network.

An Integrated High-Speed Full Duplex Coherent OFDM-PON and Visible-Light Communication System

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Simarpreet Kaur ◽  
Mahendra Kumar ◽  
Ashu Verma
Keyword(s):  
Visible Light ◽  
Optical Networks ◽  
High Speed ◽  
Light Emitting Diode ◽  
Low Cost ◽  
Dispersion Compensation ◽  
Optical Network ◽  
Visible Light Communication ◽  
Passive Optical Network ◽  
Full Duplex

AbstractWe demonstrated a full duplex hybrid passive optical network and indoor optical wireless system employing coherent optical frequency division multiplexing. To accomplish reliable transmission in passive optical networks integrated visible-light communication (VLC), yellow light-emitting diode and infrared LED is used in downstream and upstream, respectively, for intra building network. In order to support high data rate, pulse-width reduction scheme based on dispersion compensation fiber is incorporated and system successfully covered the distance of 50 km. A data stream at the rate of 30 Gb/s is transmitted for each user out of eight users. VLC-supported users are catered with the bit rate of 1.87 Gb/s over 150 cm and in order to realize a low-cost system, visible and infrared LEDs are used in downlink and uplink, respectively.

Optical network unit‐based traffic prediction for Ethernet passive optical networks

2014 ◽  
Vol 8 (5) ◽  
pp. 349-357 ◽  
Author(s):  
Ioannis Mamounakis ◽  
Konstantinos Yiannopoulos ◽  
Georgios Papadimitriou ◽  
Emmanuel Varvarigos
Keyword(s):  
Optical Networks ◽  
Optical Network ◽  
Passive Optical Networks ◽  
Traffic Prediction ◽  
Optical Network Unit ◽  
Ethernet Passive Optical Networks

Dynamic Bandwidth Allocation for Ethernet Passive Optical Networks

2010 ◽  
pp. 146-161 ◽  
Author(s):  
Jun Zheng ◽  
Hussein T. Mouftah
Keyword(s):  
Optical Networks ◽  
Bandwidth Allocation ◽  
Optical Network ◽  
Passive Optical Networks ◽  
Dynamic Bandwidth Allocation ◽  
Limited Bandwidth ◽  
Critical Issues ◽  
Ethernet Passive Optical Networks ◽  
Dynamic Bandwidth

Bandwidth allocation is one of the critical issues in the design of Ethernet passive optical networks (EPONs). In an EPON system, multiple optical network units (ONUs) share a common upstream transmission channel for data transmission. To efficiently utilize the limited bandwidth of the upstream channel, a system must dynamically allocate the upstream bandwidth among multiple ONUs based on the instantaneous bandwidth demands and quality of service requirements of end users. This chapter gives an introduction of the fundamental concepts on bandwidth allocation in an EPON system, discusses the major challenges in designing a polling protocol for bandwidth allocation, and presents an overview of the state-of-the-art dynamic bandwidth allocation (DBA) algorithms proposed for EPONs.

scholarly journals An overview of passive optical networks and components

2021 ◽  
Author(s):  
Kanchan Bala
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Optical Network ◽  
Access Network ◽  
Single Mode ◽  
Telecommunication Networks ◽  
Passive Optical Network ◽  
Passive Optical Networks ◽  
Optical Access ◽  
Last Mile

Over the past few years, telecommunication networks have experienced a dramatic shift from traditional voice-dominated traffic to data-oriented, application-based traffic. The access network or the last-mile connecting households or businesses to the internet backbone, have been recognized as a major bottleneck in todays network hierarchy. The ongoing demand for new access networks that support high-speed (greater than 100 Mb/s), symmetric, and guaranteed bandwidths for future video services has been accelerated and the search for a cost-effective optical access solution has yielded a number of possible solutions. To satisfy the required bandwidth over a 20-km transmission distance, single-mode optical fiber is a natural choice. Passive Optical Networks (PONs) are promising access solutions that will open the last-mile bottleneck bringing data rates of 100 Mb/s to 1 Gb/s to the end-users. The goal of this work is to provide a cohesive overview of research done in the area of Fiber In The Loop (FITL) optical access technology. Specifically, it explores the area of Passive Optical Network (PON) : its history, variants, architecture, and standards. Various passive optical components which make a passive optical network work, are also discussed. Some laboratory emulations on RF over PON showing noise, distortion, and fading in the channels are then carried on using the Vector Signal Generator SMIQ03B (Rhode & Schwarz), and the Wireless Communication Analyzer WCA380 (SONY Tektronix).

scholarly journals An overview of passive optical networks and components

2021 ◽  
Author(s):  
Kanchan Bala
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Optical Network ◽  
Access Network ◽  
Single Mode ◽  
Telecommunication Networks ◽  
Passive Optical Network ◽  
Passive Optical Networks ◽  
Optical Access ◽  
Last Mile

Over the past few years, telecommunication networks have experienced a dramatic shift from traditional voice-dominated traffic to data-oriented, application-based traffic. The access network or the last-mile connecting households or businesses to the internet backbone, have been recognized as a major bottleneck in todays network hierarchy. The ongoing demand for new access networks that support high-speed (greater than 100 Mb/s), symmetric, and guaranteed bandwidths for future video services has been accelerated and the search for a cost-effective optical access solution has yielded a number of possible solutions. To satisfy the required bandwidth over a 20-km transmission distance, single-mode optical fiber is a natural choice. Passive Optical Networks (PONs) are promising access solutions that will open the last-mile bottleneck bringing data rates of 100 Mb/s to 1 Gb/s to the end-users. The goal of this work is to provide a cohesive overview of research done in the area of Fiber In The Loop (FITL) optical access technology. Specifically, it explores the area of Passive Optical Network (PON) : its history, variants, architecture, and standards. Various passive optical components which make a passive optical network work, are also discussed. Some laboratory emulations on RF over PON showing noise, distortion, and fading in the channels are then carried on using the Vector Signal Generator SMIQ03B (Rhode & Schwarz), and the Wireless Communication Analyzer WCA380 (SONY Tektronix).

scholarly journals Call-level Analysis of Hybrid WDM-OCDMA Passive Optical Networks with Finite Traffic Sources

2009 ◽  
Author(s):  
Vardakas J.S. ◽  
Vassilakis V.G. ◽  
Logothetis M.D.
Keyword(s):  
Optical Networks ◽  
Low Cost ◽  
Analytical Models ◽  
Passive Optical Networks ◽  
Call Blocking ◽  
Blocking Probabilities ◽  
Upstream Direction ◽  
Call Blocking Probabilities ◽  
Level Performance ◽  
Level Analysis

Passive Optical Networks (PONs) are becoming a mature concept for the provision of enormous bandwidth to end-users with low cost. In this paper we study the call-level performance of two PON configurations: the OCDMA-PON and the Hybrid WDM-OCDMA PON. We propose analytical models for calculating connection failure probabilities (due to unavailability of a wavelength) and call blocking probabilities (due to the total interference on a call that may exceed a permissible threshold) in the upstream direction. The PONs are described/modeled by onedimensional Markov chains. Bysolving them, we derive recurrent formulas for the blocking probabilities. The proposed analytical models are validated through simulation; their accuracy was found to be absolutely satisfactory.

Sign in / Sign up

Export Citation Format

Share Document