Need of Algorithm Selection in Next Generation Optical Networks

2018 ◽  
Vol 14 (1) ◽  
pp. 81-92
Author(s):  
P. Selvaraj ◽  
V. Nagarajan
Keyword(s):  
Optical Networks ◽  
Optical Network ◽  
Cost Effective ◽  
Data Networks ◽  
Next Generation ◽  
Algorithm Selection ◽  
Automated Algorithm ◽  
Path Computation ◽  
Computation Algorithm ◽  
Selection Methodology

The IP-based data networks and optical networks have been managed independently with layered protocol stack approach. Both of them were over-provisioned to manage any traffic anomalies and failures. The next generation optical network is expected to handle the needs of the emerging applications in a cost-effective way while satisfying the required QoT. In such scenario, the intents of the application layer must be accounted in the path computation. There is no single path computation algorithm exists which behave optimally under varying traffic conditions. Hence the need for the intent-driven automated algorithm selection was identified. The authors have phrased this intent specific lightpath provisioning problem as the path computation algorithm selection problem. An algorithm selection methodology was proposed with the study of the least congested path in ONOS based software defined controller environment. This approach is claimed as an amenable candidate for the next generation software-defined optical network.

Ethernet Passive Optical Networks

2009 ◽  
pp. 482-488
Author(s):  
Mário M. Freire ◽  
Paulo P. Monteiro ◽  
Henrique J.A. da Silva ◽  
José Ruela
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Low Cost ◽  
Optical Network ◽  
Cost Effective ◽  
Passive Optical Networks ◽  
Multipoint Control ◽  
Upstream Direction ◽  
Working Groups ◽  
Ethernet Passive Optical Networks

Recently, Ethernet Passive Optical Networks (EPONs) have received a great amount of interest as a promising cost-effective solution for next-generation high-speed access networks. This is confirmed by the formation of several fora and working groups that contribute to their development, namely the EPON Forum (http://www. ieeecommunities.org/epon), the Ethernet in the First Mile Alliance (http://www.efmalliance.org), and the IEEE 802.3ah working group (http://www.ieee802. org/3/efm), which is responsible for the standardization process. EPONs are a simple, inexpensive, and scalable solution for high-speed residential access capable of delivering voice, high-speed data, and multimedia services to end users (Kramer, Mukherjee, & Maislos, 2003; Kramer & Pesavento, 2002; Lorenz, Rodrigues, & Freire, 2004; McGarry, Maier, & Reisslein, 2004; Pesavento, 2003). An EPON combines the transport of IEEE 802.3 Ethernet frames over a low-cost and broadband point-to-multipoint passive optical fibre infrastructure connecting the optical line terminal (OLT) located at the central office to optical network units (ONUs) usually located at the subscriber premises. In the downstream direction, the EPON behaves as a broadcast and select shared medium, with Ethernet frames transmitted by the OLT reaching every ONU. In the upstream direction, Ethernet frames transmitted by each ONU will only reach the OLT, but an arbitration mechanism is required to avoid collisions. This article provides an overview of EPONs focused several issues: EPON architecture, multipoint control protocol (MPCP), quality of service (QoS), and operations, administration, and maintenance (OAM) capability of EPONs.

Wavelength Division Multiplexed Passive Optical Networks

2010 ◽  
pp. 68-101
Author(s):  
Calvin C.K. Chan
Keyword(s):  
Optical Networks ◽  
Large Scale ◽  
Driving Forces ◽  
Optical Network ◽  
Access Network ◽  
High Capacity ◽  
Next Generation ◽  
Wavelength Division ◽  
Wavelength Division Multiplexed ◽  
Capacity Data

Wavelength division multiplexed passive optical network has emerged as a promising solution to support a robust and large-scale next generation optical access network. It offers high-capacity data delivery and flexible bandwidth provisioning to all subscribers, so as to meet the ever-increasing bandwidth requirements as well as the quality of service requirements of the next generation broadband access networks. The maturity and reduced cost of the WDM components available in the market are also among the major driving forces to enhance the feasibility and practicality of commercial deployment. In this chapter, the author will provide a comprehensive discussion on the basic principles and network architectures for WDM-PONs, as well as their various enabling technologies. Different feasible approaches to support the two-way transmission will be discussed. It is believed that WDM-PON is an attractive solution to realize fiber-to-the-home (FTTH) applications.

Cost-Effective Survivable Virtual Optical Network Mapping in Flexible Bandwidth Optical Networks

2016 ◽  
Vol 34 (10) ◽  
pp. 2398-2412 ◽  
Author(s):  
Bowen Chen ◽  
Jie Zhang ◽  
Weisheng Xie ◽  
Jason P. Jue ◽  
Yongli Zhao ◽  
...  
Keyword(s):  
Optical Networks ◽  
Optical Network ◽  
Cost Effective ◽  
Network Mapping

scholarly journals A Review of DSP-Based Enabling Technologies for Cloud Access Networks

2018 ◽  
Vol 10 (11) ◽  
pp. 109
Author(s):  
Roger Giddings ◽  
Xiao Duan ◽  
Ehab Al-Rawachy ◽  
Mingzhi Mao
Keyword(s):  
Optical Networks ◽  
Research Work ◽  
Digital Signal ◽  
Cost Effective ◽  
Video On Demand ◽  
Access Networks ◽  
Mobile Systems ◽  
Data Networks ◽  
Network Resources ◽  
Optical Channels

Optical access networks, metro networks and mobile data networks are facing rapidly evolving demands, not only is it essential to satisfy the unyielding need for increased user bandwidths, but future networks must also support the growing wide variation in traffic dynamics and characteristics, due to various emerging technologies, such as cloud-based services, the Internet-of-Things (IoT) and 5G mobile systems, and due to growing trends, such as the proliferation of mobile devices and the rapidly increasing popularity of video-on-demand services. To be cost-effective and commercially sustainable, future optical networks must offer features, such as, dynamic reconfigurability, highly efficient use of network resources, elastic bandwidth provisioning with fine granularity, network sliceabilty and software defined networking (SDN). To meet these requirements Cloud Access Networks (CANs) are proposed which require a number of flexible, adaptive and reconfigurable networking elements. By exploiting digital signal processing (DSP) we have proposed a digital orthogonal filter-based multiplexing technique to implement CANs with multiplexed, independent optical channels at the wavelength, sub-wavelength, and orthogonal sub-band levels. This paper reviews the overall CAN concept, the operating principles of the various CAN network elements and presents an overview of the research work we have undertaken in order to validate the feasibility of the proposed technologies which includes real-time DSP-based demonstrations.

Ethernet Passive Optical Networks

2011 ◽  
pp. 283-289
Author(s):  
Mário M. Freire ◽  
Paulo P. Monteiro ◽  
Henrique J.A. da Silva ◽  
Jose Ruela
Keyword(s):  
Optical Networks ◽  
High Speed ◽  
Low Cost ◽  
Optical Network ◽  
Cost Effective ◽  
Passive Optical Networks ◽  
Upstream Direction ◽  
Working Groups ◽  
Optical Line ◽  
Ethernet Passive Optical Networks

Recently, Ethernet Passive Optical Networks (EPONs) have received a great deal of interest as a promising cost-effective solution for next-generation high-speed access networks. This is confirmed by the formation of several fora and working groups that contribute to their development; namely, the EPON Forum (http://www.ieeecommunities.org/epon), the Ethernet in the First Mile Alliance (http://www.efmalliance.org), and the IEEE 802.3ah working group (http://www.ieee802.org/3/efm), which is responsible for the standardization process. EPONs are a simple, inexpensive, and scalable solution for high-speed residential access, capable of delivering voice, high-speed data, and multimedia services to end users (Kramer, Mukherjee &Maislos, 2003; Kramer & Pesavento, 2002; Lorenz, Rodrigues & Freire, 2004; Pesavento, 2003; McGarry, Maier & Reisslein, 2004). An EPON combines the transport of IEEE 802.3 Ethernet frames over a low-cost and broadband point-to-multipoint passive optical fiber infrastructure connecting the Optical Line Terminal (OLT) located at the central office to Optical Network Units (ONUs), usually located at the subscriber premises. In the downstream direction, the EPON behaves as a broadcast and select shared medium, with Ethernet frames transmitted by the OLT reaching every ONU. In the upstream direction, Ethernet frames transmitted by each ONU will only reach the OLT, but an arbitration mechanism is required to avoid collisions.

Sign in / Sign up

Export Citation Format

Share Document