Compressive Deformation Behavior of the SiCw/AZ91 Composite at Elevated Temperatures

2005 ◽  
pp. 783-786
Author(s):  
S.B. Li ◽  
Wei Min Gan ◽  
Ming Yi Zheng ◽  
Kun Wu
Keyword(s):  
Deformation Behavior ◽  
Elevated Temperatures ◽  
Compressive Deformation

scholarly journals Compressive Deformation Behavior at Elevated Temperatures in a Closed-Cell Aluminum Foam

2005 ◽  
Vol 46 (7) ◽  
pp. 1677-1680 ◽  
Author(s):  
Masataka Hakamada ◽  
Tatsuho Nomura ◽  
Yasuo Yamada ◽  
Yasumasa Chino ◽  
Youqing Chen ◽  
...  
Keyword(s):  
Deformation Behavior ◽  
Aluminum Foam ◽  
Elevated Temperatures ◽  
Compressive Deformation ◽  
Closed Cell

Investigation on Zener-Hollomon Parameter in the Hot Compressive Deformation Behavior of SWRCH 35K

2013 ◽  
Vol 753-755 ◽  
pp. 241-244
Author(s):  
Peng Tian ◽  
Zhi Yong Zhong ◽  
Wei Jun Hui ◽  
Rui Guo Bai ◽  
Xing Li Zhang ◽  
...  
Keyword(s):  
Activation Energy ◽  
Strain Rate ◽  
Deformation Behavior ◽  
Deformation Rate ◽  
Deformation Temperature ◽  
Compressive Deformation ◽  
Stored Energy ◽  
Hollomon Parameter ◽  
Deformation Activation Energy ◽  
Quadratic Fitting

The hot compressive deformation behavior of SWRCH 35K was studied with uniaxial hot compression simulation tests at 923 ~ 1223 K and strain rate of 0.01 ~ 20 /s. The results show that the hot compressive deformation activation energy was 408 kJ/mol and the rang of deformation stored energy was 10 ~ 50 J/mol. The quadratic fitting expression between deformation stored energy and Zener-Hollomon parameter (Z) was established and the deformation stored energy was considered to increased with increasing Z or with lower deformation temperature and increasing deformation rate.

The High Temperature Deformation Behavior of A Cr2Nb Ordered Intermetallic System

1990 ◽  
Vol 213 ◽  
Author(s):  
G. E. Vignoul ◽  
J.M. Sanchez ◽  
J. K. Tien
Keyword(s):  
Deformation Behavior ◽  
Elevated Temperatures ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Deformation Law ◽  
Ordered Intermetallic ◽  
Intermetallic System ◽  
Increasing Temperature ◽  
Stress Term

ABSTRACTA basic characterization of the deformation behavior of Cr2Nb by microindention at ambient and elevated temperatures (up to 1400 °C) was undertaken. The microhardness of this system was seen to decrease with increasing temperature, from 1040 MPa at 25°C to 322 MPa at 1400 °C. Further, the microindention creep behavior of this system was studied by varying time on load at T = 1000 and 1200°C. Analysis of the data showed that m = 24 and Qapp = 477.61 kJ/mole. These unusually high values are indicative of the existence of an effective resisting stress against creep. When the data was fit against a microindention creep deformation law which was modified to incorporate an effective resisting stress term, it was determined that m = 4.5, Qcreep = 357 kJ/mole and the resisting stress term σr = 300 MPa.

Sign in / Sign up

Export Citation Format

Share Document