Biomechanical Research on Plantar Pressure Distribution in Different Landing Condition

2011 ◽  
Vol 110-116 ◽  
pp. 4518-4521
Author(s):  
J.J. Chen ◽  
Jian She Li ◽  
Y.D. Gu

With the increase of the difficulty and intensity on competitive movement, the rate of sport injury will happen in training and competing frequently. The metatarsal is one of the most prone to injury part in the human body. The incidence of metatarsal injuries is rising in recently years. In this study, Pedar-X plantar pressure measure system and Novel emed pressure distribution measure plate were used in order to get the dynamics data in normal landing and inverted landing. The research concluded that: metatarsal peak stress had been transferred from the first metatarsal to the fifth metatarsal with increasing of varus angle. When the foot was in inverted state, stress distribution of metatarsal changed significantly. Lateral metatarsal played a major role in supporting function. Also, forefoot pressure distribution changed a lot in different functional sports shoes. The purpose is to provide the reliable correlative theoretical basis for improving sport equipments and security protection recommendations for people to engage in sports.

2014 ◽  
Vol 39 (2) ◽  
pp. 134-139 ◽  
Author(s):  
Maede Farzadi ◽  
Zahra Safaeepour ◽  
Mohammad E Mousavi ◽  
Hassan Saeedi

Background:Higher plantar pressures at the medial forefoot are reported in hallux valgus. Foot orthoses with medial arch support are considered as an intervention in this pathology. However, little is known about the effect of foot orthoses on plantar pressure distribution in hallux valgus.Objectives:To investigate the effect of a foot orthosis with medial arch support on pressure distribution in females with mild-to-moderate hallux valgus.Study design:Quasi-experimental.Methods:Sixteen female volunteers with mild-to-moderate hallux valgus participated in this study and used a medial arch support foot orthosis for 4 weeks. Plantar pressure for each participant was assessed using the Pedar-X®in-shoe system in four conditions including shoe-only and foot orthosis before and after the intervention.Results:The use of the foot orthosis for 1 month led to a decrease in peak pressure and maximum force under the hallux, first metatarsal, and metatarsals 3–5 ( p < 0.05). In the medial midfoot region, peak pressure, maximum force, and contact area were significantly higher with the foot orthosis than shoe-only before and after the intervention ( p = 0.00).Conclusion:A foot orthosis with medial arch support could reduce pressure beneath the hallux and the first metatarsal head by transferring the load to the other regions. It would appear that this type of foot orthosis can be an effective method of intervention in this pathology.Clinical relevanceFindings of this study will improve the clinical knowledge about the effect of the medial arch support foot orthosis used on plantar pressure distribution in hallux valgus pathology.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1450
Author(s):  
Alfredo Ciniglio ◽  
Annamaria Guiotto ◽  
Fabiola Spolaor ◽  
Zimi Sawacha

The quantification of plantar pressure distribution is widely done in the diagnosis of lower limbs deformities, gait analysis, footwear design, and sport applications. To date, a number of pressure insole layouts have been proposed, with different configurations according to their applications. The goal of this study is to assess the validity of a 16-sensors (1.5 × 1.5 cm) pressure insole to detect plantar pressure distribution during different tasks in the clinic and sport domains. The data of 39 healthy adults, acquired with a Pedar-X® system (Novel GmbH, Munich, Germany) during walking, weight lifting, and drop landing, were used to simulate the insole. The sensors were distributed by considering the location of the peak pressure on all trials: 4 on the hindfoot, 3 on the midfoot, and 9 on the forefoot. The following variables were computed with both systems and compared by estimating the Root Mean Square Error (RMSE): Peak/Mean Pressure, Ground Reaction Force (GRF), Center of Pressure (COP), the distance between COP and the origin, the Contact Area. The lowest (0.61%) and highest (82.4%) RMSE values were detected during gait on the medial-lateral COP and the GRF, respectively. This approach could be used for testing different layouts on various applications prior to production.


2011 ◽  
Vol 33 (3) ◽  
pp. 396-400 ◽  
Author(s):  
Karin Elisabeth Fiedler ◽  
Wijnand Jan A. Stuijfzand ◽  
Jaap Harlaar ◽  
Joost Dekker ◽  
Heleen Beckerman

1995 ◽  
Vol 10 (5) ◽  
pp. 271-274 ◽  
Author(s):  
H Chen ◽  
BM Nigg ◽  
M Hulliger ◽  
J de Koning

Sign in / Sign up

Export Citation Format

Share Document