Three-Dimensional Modeling and Finite Element Analysis of Ladle Turret

2010 ◽  
Vol 102-104 ◽  
pp. 179-183
Author(s):  
Xiao Chun Zhang ◽  
Zhen Wen Yuan
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Steel Ladle ◽  
Mechanism Analysis ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Modeling Technology ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Digital Modeling

In this paper the Finite Element Method (FEM) is applied to verify the reliability of the steel ladle turret while the steel ladle capacity was extended. The three-dimensional model of the ladle turret parts were constructed with the 3D digital modeling technology. The models of main subassembly that need to be checked were digitally assembled imitatively. The key forcing parts were FEM Meshed and analyzed the stress and the displacement. The verify check results show that the coefficient of safety of the equipment is large enough for the ladle capacity raised from 300t to 320t without changing the structure of ladle turret. It can meet the strength requirement after the ladle capacity was extended. The digital assembled model of the equipment can also be used for further digital mechanism analysis.

Three-Dimensional Modeling and Finite Element Analysis of the Hydraulic Support

2013 ◽  
Vol 712-715 ◽  
pp. 1002-1005
Author(s):  
Ling Hui Li ◽  
Xiao Wen Zheng
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Hydraulic Support ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Partial Load

A three-dimensional model of two columns covering hydraulic support was created by Pro/E software. The model was imported into ABAQUS software for finite element analysis. The stresss distribution of the hydraulic support in the conditions of the top beam partial load and the base reversed was got. The result was a reference in the design and structural optimization of the hydraulic support.

Motion Simulation and Finite Element Analysis of the Manipulator Based on SolidWorks

2014 ◽  
Vol 596 ◽  
pp. 640-645
Author(s):  
Peng Lu ◽  
Dao Lai Cheng ◽  
Gang Shi ◽  
Zhi Hao Zhou ◽  
Nan Kun Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Motion Simulation ◽  
Welding Robot ◽  
Element Analysis ◽  
Work Space ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Design Structure

It will use SolidWorks to design structure of Manipulator and to establish the Three-dimensional Modeling based on automated welding robot of Shanghai Bamac Electric Technology Co., Ltd.,then by using the plug of simulation and motion of SolidWorks, it will focus on the Motion Simulation and Finite Element Analysis of the Manipulator. Finally the trajectory and the work space of the Manipulate can be received, and provide a basis of manipulator analysis in order to optimize the manipulator for the company.

Three-Dimensional FEM Analysis of Sensitive Mechanism of Airflow Level Posture Sensor Based on Thermoelectric Coupling

2011 ◽  
Vol 271-273 ◽  
pp. 211-215
Author(s):  
Ming Ming Ji ◽  
Lin Hua Piao ◽  
Bai Hua Li
Keyword(s):  
Finite Element ◽  
Model Building ◽  
Three Dimensional ◽  
Fem Analysis ◽  
Three Dimensional Model ◽  
Three Dimensional Modeling ◽  
Equation Solving ◽  
Dimensional Modeling ◽  
Element Simulation ◽  
Simulation Based

Using ANSYS program, the finite element simulation based on thermoelectric coupling is conducted by a series of procedures, such as three-dimensional model building of airflow level posture sensor according to the actual size of the proportion, network modifying, loads applying and equation solving. The sensitive mechanism of airflow level posture sensor is explained by finite element method. The numerical results show that compared with two-dimensional modeling, the simulation result of three-dimensional modeling and thermoelectric analysis methods are more comprehensive and accurate, which provides more reliable basis for practical research of the airflow level posture sensor.

Based on Pro/E and Ansys'Finite Element Analysis of Conveying Roller

2012 ◽  
Vol 271-272 ◽  
pp. 797-800
Author(s):  
Chan Juan Chen ◽  
Zhou Wen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Local Strain ◽  
Analysis Software ◽  
Roller Conveyor ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Modeling Software

In order to study conveying roller force and improve its mechanical properties, we use three-dimensional modeling software Pro/E to build the solid model of the Apple box delivery device’s conveying roller. Using finite element analysis software Ansys to analyze conveying roller’s bending stress, we can get images of local strain and displacement contours .Contrasting with factory’s broken roller conveyor, we can find that: through the establishment of appropriate boundary conditions, Ansys can accurate finite element analysis, and provide the basis for the conveying roller structure improvements.

Modal Analysis of the Gantry Milling and Boring Machine Tool Beam Based on FEM

2012 ◽  
Vol 151 ◽  
pp. 424-428
Author(s):  
Zhong Liang Cao ◽  
Yan Ding ◽  
Qing Ming Hu ◽  
Qiang Guo
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Modal Analysis ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Relative Deformation ◽  
Milling Machine ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling

Fixed beam gantry for large CNC boring and milling machine to bear the beams on the rail side apron, and other parts ram weight under weight and size of deformation produced a result of the assembly accuracy of less than standard, use three-dimensional modeling software UG and finite element analysis software ANSYS for dynamic beam gantry milling machine CNC beam three-dimensional modeling and modal analysis, based on weight and apron beams, the weight of ram and other components in relative deformation amplitude, and the gantry milling machine processing characteristics and overall design of the structural characteristics of machine tools, assembly of the beam is proposed to note some issues and some ways to solve the assembly size requirements, through finite element analysis of the deformation and comparing the actual measured value, the experiment proved data on-site assembly solution with a good theoretical support.

A Study of Three Dimensional Modeling Technology on Food Twin-Screw Extruder

2011 ◽  
Vol 55-57 ◽  
pp. 550-554
Author(s):  
Chun Fang Zhao ◽  
Jiang Jiao Lin ◽  
Li Xue Zhu
Keyword(s):  
Product Design ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Screw Extruder ◽  
Modeling Technology ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Twin Screw ◽  
Specific Modeling

Three-dimensional model of the parts of the extrusion extruder for leisure food is created as an illustrator, which could be adopted up to form an assemble facility to the whole set of the machine conveniently by a software of SolidWorks in the paper.Some key specific modeling procedures are proved to show the advantages of Solidworks overweigh AutoCAD in three-dimensional modeling technology. The method put an adaptable way to short the whole lifetime of industrial product design.

The Frame Design and Analysis of the Postal Assisted Bicycle

2013 ◽  
Vol 318 ◽  
pp. 87-90
Author(s):  
Zhong Xia Xiang ◽  
Huan Luo ◽  
Xi Yang ◽  
Zhen Yuan Chang
Keyword(s):  
Mechanical Properties ◽  
Three Dimensional ◽  
Final Analysis ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Frame Design ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Bicycle Frame ◽  
Modeling Software

A postal assisted bicycle frame is designed according to the demands of the market. And the three-dimensional modeling software is used to establish the three-dimensional model of the bicycle. Using the model of the bicycle and combined with the actual riding positions, the mechanical properties of the bicycle are analyzed by the software of finite element analysis under different riding situations. According to the analysis results, the size of the bicycle frame is changed to improve the mechanical properties of the bicycle. And these changes receive a very good result from the final analysis of the postal assisted bicycle.

Sign in / Sign up

Export Citation Format

Share Document