Heat and Mass Transfer in Wet Fibroporous Material Considering Moisture Evaporation

2015 ◽  
Vol 1097 ◽  
pp. 51-55
Author(s):  
V.Yu. Polovnikov ◽  
E.V. Gubina
Keyword(s):  
Thermal Conductivity ◽  
Numerical Simulation ◽  
Mass Transfer ◽  
Heat Flux ◽  
Effective Thermal Conductivity ◽  
Heat And Mass Transfer ◽  
Total Heat Flux ◽  
Moisture Evaporation ◽  
Volume Fractions ◽  
Mass Fluxes

Results of numerical simulation of heat and mass transfer in a wet fibroporous material in conditions of evaporation and steam diffusion were completed. Values of heat and mass fluxes were established. The contribution of evaporation effect to total heat flux and need to consider volume fractions of water and steam into the structure of fibroporous material in calculation of effective thermal conductivity were shown. Nonstationarity of heat and mass transfer in conditions of considered problem can be ignored.

Numerical Simulation of Heat and Mass Transfer in Metal Hydride Hydrogen Accumulators of Different Complex Designs

2010 ◽  
Author(s):  
Dmitriy Lazarev ◽  
Valeriy Artemov ◽  
Georgiy Yankov ◽  
Konstantin Minko
Keyword(s):  
Thermal Conductivity ◽  
Mass Transfer ◽  
Effective Thermal Conductivity ◽  
Heat And Mass Transfer ◽  
Metal Hydride ◽  
Solid Phase ◽  
Three Dimensional ◽  
Calculated Data ◽  
Sorption Rate ◽  
Gas Admixtures

A three-dimensional mathematical model of unsteady heat and mass transfer in porous hydrogen-absorbing media, accounting for presence of “passive” gas admixtures, is developed. New technique for evaluation of effective thermal conductivity of porous medium, which consists of microparticles, is suggested. Effect of “passive” gas admixtures on heat and mass transfer and sorption rate in metal hydride reactor is analyzed. It is shown that decrease of effective thermal conductivity and partial hydrogen pressure under decrease of hydrogen concentration effect on the hydrogen sorption rate considerably. It is disclosed that an intensive 3D natural convection takes place in a gas volume of reactor under certain conditions. Numerical analysis of heat and mass transfer in metal-hydride reactor of hydrogen accumulation systems was done. Sorption of hydrogen in cylindrical reactors with external cooling and central supply of hydrogen are analyzed including reactors with finned active volume and tube-shell reactor with external and internal cooling cartridge matrix. Unsteady three dimensional temperature and concentration fields in solid phase are presented. Integral curves representing the dynamic of sorption and desorption are calculated. Data on efficiency of considered reactors are presented and compared.

scholarly journals A macroscale mixture theory analysis of deposition and sublimation rates during heat and mass transfer in dry snow

2015 ◽  
Vol 9 (5) ◽  
pp. 1857-1878 ◽  
Author(s):  
A. C. Hansen ◽  
W. E. Foslien
Keyword(s):  
Thermal Conductivity ◽  
Mass Transfer ◽  
Diffusion Coefficient ◽  
Effective Thermal Conductivity ◽  
Heat And Mass Transfer ◽  
Effective Diffusion ◽  
Mixture Theory ◽  
Temperature Gradients ◽  
Snow Metamorphism ◽  
Sublimation Rates

Abstract. The microstructure of a dry alpine snowpack is a dynamic environment where microstructural evolution is driven by seasonal density profiles and weather conditions. Notably, temperature gradients on the order of 10–20 K m−1, or larger, are known to produce a faceted snow microstructure exhibiting little strength. However, while strong temperature gradients are widely accepted as the primary driver for kinetic growth, they do not fully account for the range of experimental observations. An additional factor influencing snow metamorphism is believed to be the rate of mass transfer at the macroscale. We develop a mixture theory capable of predicting macroscale deposition and/or sublimation in a snow cover under temperature gradient conditions. Temperature gradients and mass exchange are tracked over periods ranging from 1 to 10 days. Interesting heat and mass transfer behavior is observed near the ground, near the surface, as well as immediately above and below dense ice crusts. Information about deposition (condensation) and sublimation rates may help explain snow metamorphism phenomena that cannot be accounted for by temperature gradients alone. The macroscale heat and mass transfer analysis requires accurate representations of the effective thermal conductivity and the effective mass diffusion coefficient for snow. We develop analytical models for these parameters based on first principles at the microscale. The expressions derived contain no empirical adjustments, and further, provide self consistent values for effective thermal conductivity and the effective diffusion coefficient for the limiting cases of air and solid ice. The predicted values for these macroscale material parameters are also in excellent agreement with numerical results based on microscale finite element analyses of representative volume elements generated from X-ray tomography.

scholarly journals Characteristics of supercritical heat transfer during filmboiling of nanofluids on a vertical heated wall

2018 ◽  
pp. 29-35
Author(s):  
А. Avramenko ◽  
M. Kovetskaya ◽  
A. Tyrinov ◽  
Yu. Kovetska
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Mathematical Model ◽  
Mass Transfer ◽  
Heat Flux ◽  
High Temperature ◽  
Heat And Mass Transfer ◽  
Heated Surface ◽  
Heated Wall ◽  
Film Boiling

Nanofluid using for intensification of heat transfer during boiling are analyzed. The using boiling nanofluids for cooling high-temperature surfaces allows significantly intensify heat transfer process by increasing the heat transfer coefficient of a nanofluid in comparison with a pure liquid. The properties of nanoparticles, their concentration in the liquid, the underheating of the liquid to the saturation temperature have significant effect on the rate of heat transfer during boiling of the nanofluid. Increasing critical heat flux during boiling of nanofluids is associated with the formation of deposition layer of nanoparticles on heated surface, which contributes changing in the microcharacteristics of heat exchange surface. An increase in the critical heat flux during boiling of nanofluids is associated with the formation of a layer of deposition of nanoparticles on the surface, which contributes to a change in the microcharacteristics of the heat transfer of the surface. Mathematical model and results of calculation of film boiling characteristics of nanofluid on vertical heated wall are presented. It is shown that the greatest influence on the processes of heat and mass transfer during film boiling of the nanofluid is exerted by wall overheating, the ratio of temperature and Brownian diffusion and the concentration of nanoparticles in the liquid. The mathematical model does not take into account the effect changing structure of the heated surface on heat transfer processes but it allows to evaluate the effect of various thermophysical parameters on intensity of deposition of nanoparticles on heated wall. The obtained results allow to evaluate the effect of nanofluid physical properties on heat and mass transfer at cooling of high-temperature surfaces. The using nanofluids as cooling liquids for heat transfer equipment in the regime of supercritical heat transfer promotes an increase in heat transfer and accelerates the cooling process of high-temperature surfaces. Because of low thermal conductivity of vapor in comparison with the thermal conductivity of the liquid, an increase in the concentration of nanoparticles in the vapor contributes to greater growth in heat transfer in the case of supercritical heat transfer.

NUMERICAL SIMULATION OF HEAT AND MASS TRANSFER IN A 2D LID-DRIVEN CAVITY

2016 ◽  
Author(s):  
Leonardo Carvalho de Jesus ◽  
Julio Tomás Aquije Chacaltana
Keyword(s):  
Numerical Simulation ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Driven Cavity
Sign in / Sign up

Export Citation Format

Share Document