Assessment of the Elastic Stress of 304 Stainless Steel Using Half-Cell Potential Measurement

2015 ◽  
Vol 1125 ◽  
pp. 355-359
Author(s):  
Saber Rashid ◽  
N. Islami ◽  
Ahmad Kamal Ariffin ◽  
M. Ridha ◽  
Syarizal Fonna
Keyword(s):  
Stainless Steel ◽  
Stress Corrosion ◽  
Elastic Stress ◽  
304 Stainless Steel ◽  
Outer Diameter ◽  
Corrosive Environment ◽  
Ring Specimen ◽  
Half Cell ◽  
Cell Potential ◽  
Potential Measurement

The aim of this paper is to investigate the effects of elastic stress for a C-ring specimen with an18.974-mm outer diameter and a 1.244-mm wall thickness. Tests are conducted on Type 304L SS material. Half-cell potential measurement specimens are used as methods of exposure and inspection The C-ring specimen for quantitatively determining the stress corrosion. Applying ASTM G38, which is a standard practice for making and using C-Ring Stress-Corrosion, was performed for elastic stress analysis. The results show that the effects of stress on the polarization curve are due to the magnitude of stress level in the specific corrosive environment.

THE EFFECT OF IMMERSION TIME ON THE CORROSION BEHAVIOR OF SUS304 IN BRINE USING HALF-CELL POTENTIAL MEASUREMENT

2016 ◽  
Vol 78 (6-9) ◽  
Author(s):  
Saber Rashid ◽  
N. Islami ◽  
A. K. Ariffin ◽  
M. Ridha ◽  
S. Fonna
Keyword(s):  
Stress Corrosion ◽  
Corrosion Behavior ◽  
Immersion Time ◽  
Plastic Anisotropy ◽  
Internal Stresses ◽  
Half Cell ◽  
Cell Potential ◽  
Potential Measurement ◽  
G 38 ◽  
The Impact

The aim of this study is to investigate the impact of immersion time, at different time values for two cases, with stressed and no stressed on materials. This study is conducted using SUS304 material with the presence of 3.5% NaCl at the range of stresses for the specimens lower than the yield strength.  The geometry of the C-ring specimen was selected for 18.974 mm and 1.244 mm for the outer diameters and the thickness respectively. The immersion time effect was investigated using the half-cell potential measurement following the ASTM G-38 standard. The approach of corrosion environment was applied to resemble the condition of loading history. Three levels of stresses were designed and applied in finite element analysis and the results known as the parameters of stress-corrosion measurement. The ASTM G-38 standard is prominent for making C-ring stress-corrosion for elastic stress analysis. The stress-corrosion test was performed at two parameters, fixed stress and no stress. The value of stresses for fixed stress was chosen for 179.199 MPa, 328.665 MPa and 460.131 MPa, correspondingly. The immersion time were selected from 0, 10 and 30 days. The electrochemical result shows that the immersion time did not affect vastly to the corrosion behavior for no stress-corrosion compared with fixed stress. The corrosion rate increases proportionally with the time immersion increments due to the inability of the steel layer protection to regenerate itself. Subsequently, it is also due to the metal was exposed to plastic deformation that resulting the internal stresses due to the plastic anisotropy of the grains.

scholarly journals Effect of Hydrogen Peroxide on Stress Corrosion Cracking of Type 304 Stainless Steel

1984 ◽  
Vol 33 (1) ◽  
pp. 33-36
Author(s):  
Eiji Kikuchi ◽  
Noriyuki Ohnaka ◽  
Akira Minato
Keyword(s):  
Hydrogen Peroxide ◽  
Stainless Steel ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Corrosion Cracking ◽  
304 Stainless Steel ◽  
Type 304 ◽  
Type 304 Stainless Steel

Intergranular Stress Corrosion Crack Growth of Sensitized Type 304 Stainless Steel in a Simulated Boiling-Water Reactor Environment

CORROSION ◽  
1997 ◽  
Vol 53 (4) ◽  
pp. 306-311 ◽  
Author(s):  
E. Kikuchi ◽  
M. ltow ◽  
J. Kuniya ◽  
H. Sakamoto ◽  
M. Yamamoto ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Stress Corrosion ◽  
Stress Corrosion Crack ◽  
Crack Growth ◽  
Boiling Water ◽  
304 Stainless Steel ◽  
Intergranular Stress Corrosion ◽  
Water Reactor ◽  
Type 304 ◽  
Type 304 Stainless Steel

scholarly journals Acoustic emission characteristics of stress corrosion cracks in a type 304 stainless steel tube

2015 ◽  
Vol 47 (4) ◽  
pp. 454-460 ◽  
Author(s):  
Woonggi Hwang ◽  
Seunggi Bae ◽  
Jaeseong Kim ◽  
Sungsik Kang ◽  
Nogwon Kwag ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Acoustic Emission ◽  
Stress Corrosion ◽  
Steel Tube ◽  
304 Stainless Steel ◽  
Stainless Steel Tube ◽  
Emission Characteristics ◽  
Type 304 ◽  
Type 304 Stainless Steel
Sign in / Sign up

Export Citation Format

Share Document