Comprehensive Evaluation Index System in the Application for Earthquake Emergency Shelter Site

2010 ◽  
Vol 156-157 ◽  
pp. 79-83 ◽  
Author(s):  
Jian Yu Chu ◽  
You Po Su

The site selection for earthquake emergency shelter is important to ensure the safety and service ability of shelter in earthquake disaster. It is aim to establish earthquake emergency shelter site evaluation index system, make use of analytic hierarchy process method to determine the index weight, using comprehensive fuzzy evaluation method to evaluate and order the shelters in certain areas, and ultimately select earquake emergency shelters.

2012 ◽  
Vol 614-615 ◽  
pp. 999-1007
Author(s):  
Zhi Dong Wang ◽  
Ke Li ◽  
Zi Fa Liu

The characteristics of wind power such as wave properties, intermittence, seasonal nature, counter regulation and so on have negative effect on power grid; grid-connected wind power on a scale is limited. To aim at the problem that there lacks quantification evaluation method on grid-connected wind power, an comprehensive evaluation index system concerning safety, adequacy, power quality and economy on the power grid which wind power is accepted. By using current advanced fuzzy interval analytic hierarchy process (FIAHP) , analyzing index such as static stability reserve coefficient, peak margin and transmission reliability margin and so on, coming up with the potential risk, thus on the condition of system safety and steady operation, penetrating power can be maximization, utilization rate improved. At last, analysis of the example proves that the evaluation index system and evaluation method is scientific and feasible.


2014 ◽  
Vol 618 ◽  
pp. 603-607 ◽  
Author(s):  
Zheng Yuan Jia ◽  
Bin He

Supplier management is an important part of supply chain management, combined with the feature of the power industry, the paper design supplier comprehensive evaluation system of power grid enterprises, and put forward comprehensive green degree into supplier evaluation index system to conform to the national grid company production requirements. Firstly, according to the index system, the analytic hierarchy process evaluation method to draw the initial weights, secondly, the modification of entropy weight method to reduce the subjective factor influence on the evaluation results by AHP , finally, an example is given to demonstrate the feasibility of the evaluation index system for the power grid enterprise, it aslo provides a theoretical basis for decision-makers during the vendor selection.


2021 ◽  
Vol 257 ◽  
pp. 02085
Author(s):  
Mian Fu ◽  
Dan Dan Wang

With the change of consumption concept, fresh food is the necessity of people’s life. The main value of fresh food is reflected in the freshness of products and the reliability of consumption. The selection and evaluation of suppliers of fresh food is the primary problem that fresh supermarket enterprises need to consider at present. Taking fresh supermarket supplier selection as the research object, this paper analyzes the key influencing factors of fresh supermarket enterprise supplier selection and evaluation, and constructs a fresh supermarket enterprise supplier selection and evaluation index system with 4 first level indicators and 15 second level indicators. At the same time, using the analytic hierarchy process and fuzzy evaluation method, this paper analyzes the evaluation index system of fresh legend supermarket in Hefei city of Anhui Province. According to the evaluation results, suppliers need to increase the rapid response capacity and improve the cold chain logistics facilities and equipment.


Author(s):  
Dong-Yang Geng ◽  
Karel Vojtasik

According to the characteristics of the sustainable development of subway traffic, the establishment process of an evaluation index system is determined, and the evaluation method and basis are defined. The evaluation index system is established from the aspects of subway traffic sustainability, economic sustainability and urban coordination sustainability. The comprehensive evaluation method of the analytic hierarchy process (AHP) model is used to calculate the weights of comprehensive evaluation indexes at each level. Finally, the sustainable development model of Shijiazhuang subway traffic is evaluated. The results show that the proposed evaluation system and model reflect the degree of sustainable development of subway traffic and can be used for reference in the evaluation of regional subway traffic sustainable development.


2014 ◽  
Vol 638-640 ◽  
pp. 2446-2449 ◽  
Author(s):  
Bo Liu ◽  
Ju Qin Shen ◽  
Gao Yan Xu ◽  
Liang Tang ◽  
Zi Lin Xu ◽  
...  

With the aim to improve the controlling efficiency of engineering project, this essay probes into the comprehensive evaluation of controlling efficiency of engineering project and put forward scientific comprehensive evaluation method to provide support to reasonable comprehensive evaluation of controlling efficiency of engineering project. Complete comprehensive evaluation index system of controlling efficiency of engineering project is constructed from three aspects, i.e. implementation efficiency of construction objective, external coordination efficiency and professional qualification enhancement efficiency; based on matter-element analytical method, mathematic model that could evaluate controlling efficiency of engineering project comprehensively is constructed.


2021 ◽  
Vol 256 ◽  
pp. 01027
Author(s):  
Youzhuo Zheng ◽  
Yu Fu ◽  
Xiaobing Xiao

To utilize the objective information of index data and consider the important role of subjective judgment in the evaluation of distribution automation equipment testing results, a comprehensive evaluation method based on AHP (Analytic Hierarchy Process) and CRITIC (CRiteria Importance Through Intercriteria Correlation) method is proposed. Firstly, an evaluation index system of distribution automation equipment testing results considering seven big indicators and thirty-six small indicators is established. Secondly, AHP and CRITIC method are adopted to solve a practical evaluation problem of distribution automation equipment testing results. The subjective weights of each evaluation index are calculated by AHP, the objective weights of each evaluation index are calculated by the CRITIC method. Then, to achieve the sorting of distribution automation equipment testing results accurately, the comprehensive weights are obtained by combining the two weights. Finally, the analysis and comparison of case studies show that the proposed evaluation index system can accurately reflect the performance of distribution automation equipment and the comprehensive evaluation method of distribution automation equipment testing results which comprehensively considers the subjective comprehensive evaluation results.


2011 ◽  
Vol 148-149 ◽  
pp. 1543-1547
Author(s):  
Xiao Li ◽  
Li Liu ◽  
Qiang Li

The energy-saving technology of the transport is still in its infancy. It has some questions about the evaluation and the promotion. Which lead to excellent energy-saving technology turn into productive forces can not be timely. In this case. The paper establishes the energy-saving technology evaluation index system by the Delphi; and calculated the evaluation index weights of each factor by the AHP. Finally, the paper proposed the evaluation method of the energy-saving technology which based on fuzzy comprehensive evaluation.


2015 ◽  
Vol 713-715 ◽  
pp. 1622-1626
Author(s):  
Ning Xie ◽  
Shuai Li ◽  
Di Li ◽  
Xiao Fei Wang

In this paper,it is mainly based on the characteristics of index of some equipment, analyses the correspondence between first class index and second class index, studies the calculation of weigh index. Several methods including linear weighted method, Comprehensive fuzzy evaluation method, and the fuzzy Borda method have been taken into account to improve the confirmable methods of judgment matrix in the Analytic Hierarchy Process (AHP). The analyses of three different eqiupment,A system,B system and C system, demonstrates that A system is the best unanimously.


Symmetry ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 847
Author(s):  
Guodong Liu ◽  
Jianjun Zhu ◽  
Xiaodi Liu

The development of the regional economy cannot be separated from the support of regional logistics, as the scientific decisions of regional logistics are helpful to promote the healthy development of the regional economy. The comprehensive evaluation of regional logistics competitiveness is the premise and foundation of regional logistics scientific decision-making; the evaluation index system, evaluation data, and index weight are the key links affecting a comprehensive evaluation. In order to improve the quality of a comprehensive evaluation, the study aims at addressing problems such as the evaluation index system of regional logistics competitiveness being complex and scattered, the normalized distribution of the evaluation data being extremely asymmetric and seriously deviating from the normal distribution, and the logic of calculating index weights by the analytic hierarchy process (AHP) not being accurate. To do this, a triangle model of regional logistics competitiveness is constructed based on Porter’s diamond model, and the evaluation index system of regional logistics competitiveness is refined from the three dimensions of resource supply, logistics service, and market demand. Based on the concept of symmetry theory, a normalization method of segmental mapping with quartiles as multiple reference points is proposed, which improves the distribution rationality, symmetry, and distance discrimination of normalized data. The dynamic index scale is used to determine the scale of the analytic hierarchy process, and the evaluation matrix is constructed based on the importance level grading table; the index weights are directly solved without a consistency check, which improves the logical accuracy of a subjective evaluation. Based on the data of segment mapping, the comprehensive evaluation value of the evaluation object is calculated, and the competitiveness of regional logistics is compared and ranked, which improves the differentiation and consistency of the results. Through the comparative analysis of the calculation results, it was proven that the improvement of the data standardization method is necessary when the range is too large. The method in this paper can make the distribution of data standardization with a range too large closer to the normal distribution. It was found that the ranking of regional logistics competitiveness is highly consistent with the total social logistics, and that the total amount of regional logistics has an important reference value for the competitiveness of regional logistics. The ranking calculated by the indicators and methods in this paper has a certain reference value for regional logistics decision-making.


Sign in / Sign up

Export Citation Format

Share Document