Study on Constitutive Relationship of Fe-36Ni Invar Alloy

2011 ◽  
Vol 291-294 ◽  
pp. 1131-1135
Author(s):  
Guo He Li ◽  
Yu Jun Cai ◽  
Hou Jun Qi
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Testing Machine ◽  
Constitutive Relationship ◽  
Invar Alloy ◽  
Hopkinson Pressure Bar ◽  
Universal Testing ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Relationship Of

By electronic universal testing machine and Split Hopkinson Pressure Bar, the mechanical properties data of Fe-36Ni invar alloy are gained at a range of temperature from 20°C to 800°C and strain rate from 10-3 /s to 104/s. An improved Johnson-Cook model is presented to describe the mechanical behavior of Fe-36Ni invar alloy at high temperature and high strain rate, and verified by experimental results.

Effect of Strain Rate on Mechanical Properties of Pure Iron

2013 ◽  
Vol 705 ◽  
pp. 21-25 ◽  
Author(s):  
Wei Ping Bao ◽  
Zhi Ping Xiong ◽  
Xue Ping Ren ◽  
Fu Ming Wang
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Work Hardening ◽  
Pure Iron ◽  
Split Hopkinson Pressure Bar ◽  
Testing Machine ◽  
Hopkinson Pressure Bar ◽  
Hardening Effect ◽  
Split Hopkinson ◽  
Pressure Bar

Effect of strain rate on mechanical properties of pure iron was studied by compression experiments using Gleebe-1500D thermal simulation testing machine and Split-Hopkinson Pressure Bar, indicating that pure iron only has strain rate hardening effect. Adiabatic temperature rise tends to increase with increasing the strain rate. Work hardening effect is also analyzed. It found that there are only two work hardening regions in static stage (10-3 to 1 s-1) while there are three work hardening regions in dynamic stage (650 to 8500 s-1). It is on account of onset of twining at high strain rates.

High-Strain-Rate Failure of a Porous Heterogeneous Composite: Balsa Wood

2001 ◽  
Author(s):  
M. Vural ◽  
G. Ravichandran
Keyword(s):  
Strain Rate ◽  
Mechanical Response ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Testing Machine ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Balsa Wood ◽  
Split Hopkinson ◽  
Pressure Bar

Abstract The compression behavior of a naturally occurring porous and heterogeneous biocomposite, balsa wood, along the grain direction is investigated at strain rates 10−3 to 104 s−1. Specimens with different densities, ranging from 55 to 380 kg/m3, were loaded by a modified Kolsky (split Hopkinson) pressure bar apparatus at varying high strain rates and by a screw-driven testing machine at quasi-static strain rates. The mechanical response of balsa wood is documented and the variation of compressive strength, crushing stress and densification strain as a function of density and strain rate is presented. Results show that characteristics of mechanical response for balsa wood are significantly affected by the strain rate and density.

Dynamic Behaviors of near β-Type Ti-5Al-5Mo-5V-3Cr Titanium Alloys under High Strain Rate

2015 ◽  
Vol 816 ◽  
pp. 795-803
Author(s):  
Yan Ling Wang ◽  
Song Xiao Hui ◽  
Wen Jun Ye ◽  
Rui Liu
Keyword(s):  
Strain Rate ◽  
Titanium Alloys ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Failure Behavior ◽  
Hopkinson Pressure Bar ◽  
Fracture Failure ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Dynamic Loading Conditions

The mechanical properties and fracture failure behavior of the near β-type Ti-5Al-5Mo-5V-3Cr-X (X = 1Fe or 1Zr) titanium alloys were studied by Split Hopkinson Pressure Bar (SHPB) experiment under the dynamic loading conditions at a strain rate of 1.5 × 103 s-1–5.0 × 103 s-1. Results showed that the SHPB specimen fractured in the direction of maximum shearing stress at an angle of 45° with the compression axis. The fracture surface revealed the shear and tension zones with cleavage steps and parabolic dimples. Severe early unloading was observed on the Ti-5553 alloy under a strain rate of 4,900 s-1 loading condition, and the dynamic property of the Ti-55531Zr alloy was proved to be the optimal.

Dynamic Hardness of MCrAlY Abradable Seal Coating

2021 ◽  
Vol 1035 ◽  
pp. 591-595
Author(s):  
Dan Guo ◽  
Jian Ming Liu ◽  
De Ming Zhang ◽  
Xin Zhang ◽  
Tong Liu
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Hopkinson Pressure Bar ◽  
Dynamic Hardness ◽  
Mcraly Coating ◽  
Static Hardness ◽  
Split Hopkinson ◽  
The Difference ◽  
Pressure Bar ◽  
Abradable Coatings

The purpose of this investigation is to study the dynamic hardness of MCrAlY abradable coatings under different strain rates. A dynamic indentation device based on the split Hopkinson pressure bar system (SHPB) was used. The results show that the hardness of MCrAlY coating increased with the increase of the strain rate, which has a positive strain rate effect. In addition, the difference of the static hardness of MCrAlY coating prepared by HVOF and LPPS was only 4%, while the difference in dynamic hardness was 16%.

scholarly journals Study on the dynamic properties of AM-SLM AlSi10Mg alloy using the Split Hopkinson Pressure Bar (SHPB) technique

2018 ◽  
Vol 183 ◽  
pp. 04005 ◽  
Author(s):  
Bar Nurel ◽  
Moshe Nahmany ◽  
Adin Stern ◽  
Nahum Frage ◽  
Oren Sadot
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Properties ◽  
Rate Sensitivity ◽  
Strain Rate Range ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Static Mechanical ◽  
Split Hopkinson ◽  
Pressure Bar

Additive manufacturing by Selective Laser Melting of metals is attracting substantial attention, due to its advantages, such as short-time production of customized structures. This technique is useful for building complex components using a metallic pre-alloyed powder. One of the most used materials in AMSLM is AlSi10Mg powder. Additively manufactured AlSi10Mg may be used as a structural material and it static mechanical properties were widely investigated. Properties in the strain rates of 5×102–1.6×103 s-1 and at higher strain rates of 5×103 –105 s-1 have been also reported. The aim of this study is investigation of dynamic properties in the 7×102–8×103 s-1 strain rate range, using the split Hopkinson pressure bar technique. It was found that the dynamic properties at strain-rates of 1×103–3×103 s-1 depend on a build direction and affected by heat treatment. At higher and lower strain-rates the effect of build direction is limited. The anisotropic nature of the material was determined by the ellipticity of samples after the SHPB test. No strain rate sensitivity was observed.

Correlation of Dynamic Response with Adiabatic Shearing Behavior in Ti–10V–2Fe–3Al Alloy

2011 ◽  
Vol 284-286 ◽  
pp. 1542-1545 ◽  
Author(s):  
Qing Wen Ding ◽  
Yu Ren ◽  
Cheng Wen Tan ◽  
Jing Zhang ◽  
Xiao Dong Yu
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Shear Bands ◽  
Lamellar Microstructure ◽  
Hopkinson Pressure Bar ◽  
Adiabatic Shearing ◽  
Critical Strain Rate ◽  
Microstructure Examination ◽  
Split Hopkinson ◽  
Pressure Bar

A Split Hopkinson Pressure Bar system was employed to investigate the compressive dynamic mechanical behaviors of Ti-10V-2Fe-3Al (Ti-1023) alloy with lamellar microstructure, over a broad strain rates ranging from 1500/s to 5100/s. The results reveal that the strain rate has a significant effect on the flow stress of Ti-1023 alloy, and there exists serious thermal softening as the strain rate exceeds 3200/s. The critical strain rate of fracture for this alloy is 2300/s. The microstructure examination indicated that adiabatic shear bands (ASBs) bifurcate more intensely with the increasing of strain rate. Micro-voids nucleate either in the ASB or interface between shear band and matrix bulk. Finally, fracture of this alloy proceeds through the nucleation, growth and coalescence of these voids and cracks along the ASBs.

A comparative study on dynamic mechanical performance of concrete and rock

2015 ◽  
Author(s):  
Xia Zhengbing ◽  
Zhang Kefeng ◽  
Deng Yanfeng ◽  
Ge Fuwen
Keyword(s):  
Mechanical Performance ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Peak Strain ◽  
Hopkinson Pressure Bar ◽  
Dynamic Mechanical ◽  
Strain And Strain Rate ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Relationship Of

Recently, engineering blasting is widely applied in projects such as rock mineral mining, construction of underground cavities and field-leveling excavation. Dynamic mechanical performance of rocks has been gradually attached importance both in China and abroad. Concrete and rock are two kinds of the most frequently used engineering materials and also frequently used as experimental objects currently. To compare dynamic mechanical performance of these two materials, this study performed dynamic compression test with five different strain rates on concrete and rock using Split Hopkinson Pressure Bar (SHPB) to obtain basic dynamic mechanical parameters of them and then summarized the relationship of dynamic compressive strength, peak strain and strain rate of two materials. Moreover, specific energy absorption is introduced to confirm dynamic damage mechanisms of concrete and rock materials. This work can not only help to improve working efficiency to the largest extent but also ensure the smooth development of engineering, providing rich theoretical guidance for development of related engineering in the future.

Sign in / Sign up

Export Citation Format

Share Document