Effects of U-Shape Inner Cooler on Flow and Solidification of Molten Steel in Slab Continuous Casting Mold

2011 ◽  
Vol 291-294 ◽  
pp. 423-427
Author(s):  
Yan Juan Jin ◽  
Xiao Chao Cui ◽  
Zhu Zhang
Keyword(s):  
Fluid Dynamics ◽  
Temperature Field ◽  
Flow Field ◽  
Continuous Casting ◽  
Molten Steel ◽  
Continuous Casting Mold ◽  
Slab Continuous Casting ◽  
Cooling Technology ◽  
Steel Flow

An inner-outer coupled cooling technology of molten steel for 1240×200mm slab continuous casting, that is to set an inner cooler—U shape pipes in the mold, is put forward in order to enhance the efficiency of transmitting heat and improve inner structure of billet. The flow status and solidification status of molten steel under coupling flow field and temperature field in inner-outer coupled cooling mold are simulated by using fluid dynamics software, and compare with those in traditional mold. It is found that setting inner cooler in the mold can make molten steel flow status even, which is favorable to floating up of the inclusion, quickening the solidification of steel liquid and improving the quality of billet.

Influence of Inner Cooler on Flow of Molten Steel in Slab Continuous Casting Mold

2012 ◽  
Vol 217-219 ◽  
pp. 1942-1945
Author(s):  
Zhu Zhang ◽  
Yan Juan Jin ◽  
Jun Ting Zhang
Keyword(s):  
Fluid Dynamics ◽  
Continuous Casting ◽  
Molten Steel ◽  
Continuous Casting Mold ◽  
Casting Mold ◽  
Slab Continuous Casting ◽  
Cooling Technology ◽  
Steel Flow

In the paper a inner-outer couple cooling technology of molten steel for 1240×200mm slab continuous casting, that is to set an inner cooler-U shape pipes in the mold, is put forward in order to enhance the efficiency of transmitting heat and improve the flow status of molten steel. The flow status of molten steel in inner-outer couple cooling mold is simulated by using fluid dynamics software. It is found that setting inner cooler in the mold can make molten steel flow status even, which partly act as electromagnetic trig and is favorable to inclusion in molten steel floating up.

Numerical Simulation of Inner-Outer Couple Cooling Slab Continuous Casting in the Filling Process

2012 ◽  
Vol 557-559 ◽  
pp. 2257-2260
Author(s):  
Yan Juan Jin ◽  
Xiao Chao Cui ◽  
Yan Xia Chen
Keyword(s):  
Temperature Field ◽  
Flow Field ◽  
Continuous Casting ◽  
Molten Steel ◽  
Solidification Rate ◽  
Surface Shape ◽  
Filling Process ◽  
Slab Continuous Casting ◽  
Free Surface Shape ◽  
Steel Flow

In the paper, flow status and solidification status of molten steel in inner-outer couple cooling mold in the filling process are simulated by using fluid dynamics software Flow-3d, and obtain distributing diagrams of flow field and temperature field and free-surface shape diagrams in the filling process. Influences of flow field and temperature field of filling process on solidification are analyzed in the slab continuous casting. It is indicated that inner cooler can improve molten steel flow status, which is favorable to inclusion in molten steel floating up, quicken the solidification rate of molten steel in the mold.

Simulation of Shell Thickness Distribution and Flow Field in Slab Continuous Casting Mold

2010 ◽  
Vol 146-147 ◽  
pp. 599-606
Author(s):  
Hong Zhong ◽  
Liang Ying Wen ◽  
Zheng Peng ◽  
Xiao Lin Zhang
Keyword(s):  
Flow Field ◽  
Continuous Casting ◽  
Molten Steel ◽  
Shell Thickness ◽  
Vortex Center ◽  
Continuous Casting Mold ◽  
Casting Mold ◽  
Slab Continuous Casting ◽  
The Impact ◽  
Port Angle

The shell distribution in the slab continuous casting mold has been simulated coupling a 3-D flow, temperature and volume fraction equations of the molten steel in FLUENT. The simulated results show that the flow velocity around the upper vortex center is decrease and the location of lower vortex center move down as the nozzle port angle increases. The simulated shell thickness in the center on the narrow face become thicker at meniscus and the shell thickness in the center on wide face decreases but the basic distributions of the shell tend to consistency as the nozzle port angle increases. The simulated results also show that the effects of solidified shell on flow field in mold is slight but the velocity of molten steel near the solidified shell. There are remelting near the impact regoins implicit our attentions in order to avoid breaking out.

scholarly journals Influence of M-EMS on Fluid Flow and Initial Solidification in Slab Continuous Casting

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3681
Author(s):  
Guoliang Liu ◽  
Haibiao Lu ◽  
Bin Li ◽  
Chenxi Ji ◽  
Jiangshan Zhang ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Flow Field ◽  
Continuous Casting ◽  
Casting Speed ◽  
Liquid Pool ◽  
Industrial Test ◽  
Magnetic Flux Density ◽  
Continuous Casting Mold ◽  
Slab Continuous Casting ◽  
Initial Solidification

A mathematical model coupled with electromagnetic field has been developed to simulate the transient turbulence flow and initial solidification in a slab continuous casting mold under different electromagnetic stirring (EMS) currents and casting speeds. Through comparing the magnetic flux density, flow field with measured results, the reliability of the mathematical model is proved. The uniform index of solidified shell thickness has been introduced to judge the uniformity of the solidified shell. The results show that a horizonal recirculation flow has been generated when EMS is applied, and either accelerated or decelerated regions of flow field are formed in the liquid pool. Large EMS current and low casting speed may cause the plug flow near the mold narrow face and a suitable EMS current can benefit to the uniform growth of solidified shell. Meanwhile, an industrial test exhibits that EMS can weaken the level fluctuation and number density of inclusion. Overall, a rational EMS current range is gained, when the casting speed is 1.2 m/min, the rational EMS current is 500–600 A.

Sign in / Sign up

Export Citation Format

Share Document