Research on the Issue of LED’s Cooling Based on Heat Conduction Equations

2012 ◽  
Vol 507 ◽  
pp. 137-141
Author(s):  
Zhi Qin Huang ◽  
Pei Ying Quan ◽  
Yong Qing Pan
Keyword(s):  
Heat Conduction ◽  
Steady State ◽  
Heat Conduction Equation ◽  
Rapid Development ◽  
Three Dimensional ◽  
Conduction Equation ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
The One

With the rapid development of power type LED, the issue of the cooling of LED has been prominent. How to make the heat generated by LED chip go out quickly in order to cool the LED chip has become an urgent problem. The form of heat goes through the substrate has been widely used and has become the best way to solve the heat problem. There are three types of LED substrate. They are metal substrate, ceramic substrate and composite substrate. At first, In this paper I analyze the theoretical of three-dimensional non-steady state and steady state heat conduction equation, then the three-dimensional model is simplified as one-dimensional model and I get the results of heat conduction equation under the one-dimensional stationary and non-steady state.

On the numerical study of thermohydrodynamics and biochemistry of inland water bodies

2021 ◽  
Author(s):  
Daria Gladskikh ◽  
Evgeny Mortikov ◽  
Victor Stepanenko
Keyword(s):  
Mixed Layer ◽  
Numerical Study ◽  
Three Dimensional ◽  
Water Bodies ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Lake Model ◽  
Upper Mixed Layer ◽  
The One

<p>The study of thermodynamic and biochemical processes of inland water objects using one- and three-dimensional RANS numerical models was carried out both for idealized water bodies and using measurements data. The need to take into account seiche oscillations to correctly reproduce the deepening of the upper mixed layer in one-dimensional (vertical) models is demonstrated. We considered the one-dimensional LAKE model [1] and the three-dimensional model [2, 3, 4] developed at the Research Computing Center of Moscow State University on the basis of a hydrodynamic code combining DNS/LES/RANS approaches for calculating geophysical turbulent flows. The three-dimensional model was supplemented by the equations for calculating biochemical substances by analogy with the one-dimensional biochemistry equations used in the LAKE model. The effect of mixing processes on the distribution of concentration of greenhouse gases, in particular, methane and oxygen, was studied.</p><p>The work was supported by grants of the RF President’s Grant for Young Scientists (MK-1867.2020.5, MD-1850.2020.5) and by the RFBR (19-05-00249, 20-05-00776). </p><p>1. Stepanenko V., Mammarella I., Ojala A., Miettinen H., Lykosov V., Timo V. LAKE 2.0: a model for temperature, methane, carbon dioxide and oxygen dynamics in lakes // Geoscientific Model Development. 2016. V. 9(5). P. 1977–2006.<br>2. Mortikov E.V., Glazunov A.V., Lykosov V.N. Numerical study of plane Couette flow: turbulence statistics and the structure of pressure-strain correlations // Russian Journal of Numerical Analysis and Mathematical Modelling. 2019. 34(2). P. 119-132.<br>3. Mortikov, E.V. Numerical simulation of the motion of an ice keel in stratified flow // Izv. Atmos. Ocean. Phys. 2016. V. 52. P. 108-115.<br>4. Gladskikh D.S., Stepanenko V.M., Mortikov E.V. On the influence of the horizontal dimensions of inland waters on the thickness of the upper mixed layer // Water Resourses. 2021.V. 45, 9 pages. (in press) </p>

scholarly journals Hydraulic modeling of combined sewers overflow integrating the results of the SWMM and CFX models.

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
D. Pulgarín ◽  
J. Plaza ◽  
J. Ruge ◽  
J. Rojas
Keyword(s):  
Three Dimensional ◽  
Hydraulic Modeling ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Ansys Cfx ◽  
Combined Sewer ◽  
The One ◽  
Swmm Model

This study proposes a methodology for the calibration of combined sewer overflow (CSO), incorporating the results of the three-dimensional ANSYS CFX model in the SWMM one-dimensional model. The procedure consists of constructing calibration curves in ANSYS CFX that relate the input flow to the CSO with the overflow, to then incorporate them into the SWMM model. The results obtained show that the behavior of the flow over the crest of the overflow weir varies in space and time. Therefore, the flow of entry to the CSO and the flow of excesses maintain a non-linear relationship, contrary to the results obtained in the one-dimensional model. However, the uncertainty associated with the idealization of flow methodologies in one dimension is reduced under the SWMM model with kinematic wave conditions and simulating CSO from curves obtained in ANSYS CFX. The result obtained facilitates the calibration of combined sewer networks for permanent or non-permanent flow conditions, by means of the construction of curves in a three-dimensional model, especially when the information collected in situ is limited.

Analysis of the Containment Thermal-Hydraulic Behavior of a Small Reactor During Loss of Coolant Accident

2017 ◽  
Author(s):  
Qian Lin ◽  
Weizhong Zhang
Keyword(s):  
Cooling System ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Loss Of Coolant Accident ◽  
Lumped Parameter ◽  
Loss Of Coolant ◽  
Calculation Results ◽  
The One

The containment thermal hydraulics of a small reactor during loss of coolant accident (LOCA) is studied by a lumped parameter one-dimensional model and a three-dimensional model. The capability of a kind of heat exchanger type passive containment cooling system (PCCS) is analyzed by the one-dimensional model. The calculation results show that, the decay heat can be removed and the containment pressure can be decreased by the proposed PCCS. The steam and non-condensable gas (the air) distribution in the containment is investigated, the mixing and stratification behaviors are analyzed for several different cases, in which the PCCS and condenser are located at higher, base or lower position. The sensitivity analysis of the PCCS elevation shows that, in despite of the different gas stratification, the containment pressures are nearly the same. Similar conclusions can be obtained by the one-dimensional model and three-dimensional model. The preliminary results may indicate that, the designed PCCS and condenser can be located at a lower part, which will be benefit for the economy of the small reactor or meet other requirements.

Three-dimensional kinetic theory approach for laser pulse heating

1999 ◽  
Vol 213 (5) ◽  
pp. 491-506 ◽  
Author(s):  
B. S. Yilbas ◽  
M Sami
Keyword(s):  
Heat Conduction ◽  
Kinetic Theory ◽  
Three Dimensional ◽  
Experimental Results ◽  
Heating Process ◽  
Theory Approach ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Heating Model

Lasers are widely used as a machine tool in the metal industry. One of the important areas of laser application is surface treatment of engineering metals. To improve the process parameters in the laser heating process, an exploration of the heating mechanism is fruitful. The present study is carried out to develop a three-dimensional model for a laser pulsed heating process using the electron kinetic theory approach. The heating model introduced relies on successive electronphonon collisions; therefore, it is this process that describes the heat conduction mechanism. This study is limited to heat conduction only. Consequently, the phase change process is not taken into account. To validate the theoretical predictions, an experiment is conducted to measure the surface temperature using an optical method. Moreover, a one-dimensional heating model developed previously is also considered and the predictions of three- and one-dimensional heating models as well as experimental results are compared. It is found that the three-dimensional model gives lower surface temperatures compared with the one-dimensional model considered. However, experimental results agree well with the results obtained from the three-dimensional model. In addition, an equilibrium time is introduced. In that case, energy gain of electrons via incident beam absorption balances the energy losses due to conduction through successive electron-phonon collisions.

scholarly journals Transition from Diffusion to Wave Propagation in Fractional Jeffreys-Type Heat Conduction Equation

2020 ◽  
Vol 4 (3) ◽  
pp. 32
Author(s):  
Emilia Bazhlekova ◽  
Ivan Bazhlekov
Keyword(s):  
Heat Conduction ◽  
Fundamental Solution ◽  
Heat Conduction Equation ◽  
Constitutive Law ◽  
Conduction Equation ◽  
Diffusion Regime ◽  
One Dimensional ◽  
Different Types ◽  
Propagation Regime ◽  
The One

The heat conduction equation with a fractional Jeffreys-type constitutive law is studied. Depending on the value of a characteristic parameter, two fundamentally different types of behavior are established: diffusion regime and propagation regime. In the first case, the considered equation is a generalized diffusion equation, while in the second it is a generalized wave equation. The corresponding memory kernels are expressed in both cases in terms of Mittag–Leffler functions. Explicit representations for the one-dimensional fundamental solution and the mean squared displacement are provided and analyzed analytically and numerically. The one-dimensional fundamental solution is shown to be a spatial probability density function evolving in time, which is unimodal in the diffusion regime and bimodal in the propagation regime. The multi-dimensional fundamental solutions are probability densities only in the diffusion case, while in the propagation case they can have negative values. In addition, two different types of subordination principles are formulated for the two regimes. The Bernstein functions technique is extensively employed in the theoretical proofs.

Study of thermoelastic damping in fully clamped bilayered rectangular microplate resonators based on three-dimensional heat conduction

2020 ◽  
Vol 44 (1) ◽  
pp. 10-22
Author(s):  
Xiaopeng Li ◽  
Linlin Wang ◽  
Wujiu Pan ◽  
Zemin Yang ◽  
Jinchi Xu
Keyword(s):  
Heat Conduction ◽  
Three Dimensional ◽  
Single Layer ◽  
Thermoelastic Damping ◽  
Dimensional Model ◽  
Layer Model ◽  
Three Dimensional Model ◽  
Formula Derivation ◽  
The One ◽  
Single Layer Model

Under the condition that microresonators work at room temperature or vaccum, thermoelastic damping is one of the main mechanisms of energy dissipation. Thermoelastic damping caused by the internal consumption of thermoelastic materials has always prevented the improvement of the quality of microresonators. In this paper, the theoretical model of thermoelastic damping in fully clamped bilayered plate microresonators based on the theory of three-dimensional heat conduction is first established and then verified to be equivalent to the previous single-layer model or not through the formula derivation. Analysis on thermoelastic damping at the first-order frequency where microresonators usually work is carried out afterwards. The differences of thermoelastic damping in the present three-dimensional model with different materials are investigated, including the convergence speed and the value of thermoelastic damping with different thicknesses. Then, with different lengths, widths, and thicknesses, but the same combination of materials, the thermoelastic damping is investigated in the present model. Furthermore, the present bilayered model is compared with the single-layer model to investigate their equivalent relationship. Finally, the present three-dimensional model is compared with the one-dimensional model and FEM models to investigate its feasibility.

Sign in / Sign up

Export Citation Format

Share Document