Study on the Transmission Spectrum of Fiber Bragg Grating as Temperature Sensor

2013 ◽  
Vol 819 ◽  
pp. 197-201
Author(s):  
Zheng Wang ◽  
Ping Yu Zhu ◽  
Hong Qiang Liang ◽  
Wei Peng

The temperature sensing characteristic of Fiber Bragg Grating (FBG) has been studied. The temperature sensing equation of FBG is revised. The accurate analysis results are obtained. The center wavelength drifts of the tested FBG are displayed in the screen of Optical Spectrum Analyzer (OSA).The experimental results show that the center wavelength of FBG is thermally red-shift with the rise of the temperature and blue-shift with the decrease of the temperature. The results are agree with the revised temperature sensing equation. It is noticed that the transmission spectrum width (SPEC-WD) of FBG fluctuates with the change of temperature. Nevertheless, the trend of the fluctuation is demonstrably towards increase, which perhaps is some potential auxiliary sensing function in future.

2019 ◽  
Vol 37 (17) ◽  
pp. 4210-4215 ◽  
Author(s):  
Zigeng Liu ◽  
Guigen Liu ◽  
Yupeng Zhu ◽  
Qiwen Sheng ◽  
Xin Wang ◽  
...  

Sensors ◽  
2011 ◽  
Vol 11 (9) ◽  
pp. 8665-8673 ◽  
Author(s):  
Mohd Afiq Ismail ◽  
Nizam Tamchek ◽  
Muhammad Rosdi Abu Hassan ◽  
Katrina D. Dambul ◽  
Jeyraj Selvaraj ◽  
...  

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Siti Musliha Aishah Musa ◽  
RK Raja Ibrahim ◽  
Asrul Izam Azmi

This paper presents early work on Fiber Bragg grating (FBG) as temperature sensor to monitor temperature variation inside a packed-bed non-thermal plasma reactor. FBG made from germania-doped fiber with center Bragg wavelength of 1552.5 nm was embedded inside non-thermal plasma reactor with sphere shape dielectric bead (barium titanate) and used to probe the temperature variation inside the reactor. The experimental works have proven that FBG is a suitable sensor to monitor temperature variation inside of reactor via LabVIEW program. Besides that, Optical Spectrum Analyzer (OSA) recorded Bragg wavelength shift as voltage of power supply increases, which indicate the non-uniform temperature variation occurring inside the reactor. However, it does not affect the chemical reaction inside the reactor because the temperature condition is in steady state.


2019 ◽  
Vol 19 (4) ◽  
pp. 1362-1367 ◽  
Author(s):  
Yue Dong ◽  
Shiying Xiao ◽  
Beilei Wu ◽  
Han Xiao ◽  
Shuisheng Jian

2008 ◽  
Vol 57 (10) ◽  
pp. 6393
Author(s):  
Wang Yan-Hua ◽  
Ren Wen-Hua ◽  
Liu Yan ◽  
Tan Zhong-Wei ◽  
Jian Shui-Sheng

2004 ◽  
Vol 53 (2) ◽  
pp. 494
Author(s):  
Qiao Xue-Guang ◽  
Jia Zhen-An ◽  
Fu Hai-Wei ◽  
Li Ming ◽  
Zhou Hong

2020 ◽  
Vol 10 (3) ◽  
pp. 99-102
Author(s):  
Tomasz Zieliński ◽  
Łukasz Zychowicz

The research presents the analysis of the influence of the glue connection on the measurement of elongation of stainless steel and aluminum samples by means of fiber Bragg grating (FBG) with uniform fibers used as a measuring transducer. Research indicates two possible factors affecting the deformation of the transmission spectrum obtained during elongation measurement. One of them is the type of adhesive that is used to make the connection between the fiber Bragg grating and the tested sample. The second possible factor is method of connection's execution. The need for research on glue connection resulted from the formation of defects mainly in the form of numerous side bands visible in the transmission spectrum during the measurement of elongations. The test results were presented in the form of graphs obtained on the basis of transmission characteristic.


Sign in / Sign up

Export Citation Format

Share Document