Investigation of the Raw Materials' Composition and Ratio Influence on the Structure and Properties of the Foamed Slag Glass

2016 ◽  
Vol 843 ◽  
pp. 183-188 ◽  
Author(s):  
E.A. Yatsenko ◽  
B.M. Goltsman ◽  
L.A. Yatsenko
Keyword(s):  
Raw Materials ◽  
Foam Glass ◽  
Thermal Power ◽  
Structure And Properties ◽  
Foaming Agent ◽  
Foaming Agents ◽  
Foamed Slag ◽  
Slag Glass ◽  
The Relationship ◽  
Foamed Slag Glass

The composition of the foam glass based on thermal power plant’s ash-slag waste – foamed slag glass – was developed. The synthesis of the samples based on the most widespread foaming agents was conducted at various temperatures. The structure and properties of the obtained samples were defined, the relationship between the type and amount of the introduced foaming agents and changes in the structure and properties of the samples were established. The best type of foaming agent for the synthesis of foamed slag glass has been selected. The production technology for products based on foamed slag glass was developed.

Physical-chemical properties and structure of foamed slag glass based on thermal power plant wastes

2013 ◽  
Vol 70 (1-2) ◽  
pp. 3-6 ◽  
Author(s):  
E. A. Yatsenko ◽  
V. A. Smolii ◽  
A. S. Kosarev ◽  
E. B. Dzyuba ◽  
I. S. Grushko ◽  
...  
Keyword(s):  
Power Plant ◽  
Thermal Power Plant ◽  
Thermal Power ◽  
Chemical Properties ◽  
Foamed Slag ◽  
Physical Chemical ◽  
Slag Glass ◽  
Foamed Slag Glass

scholarly journals Investigation of the Influence of Foaming Agents’ Type and Ratio on the Foaming and Reactionary Abilities of Foamed Slag Glass

2015 ◽  
Vol 12 (Special-Edn2) ◽  
pp. 625-632 ◽  
Author(s):  
Elena Alfredovna Yatsenko ◽  
Boris Mikhailovich Goltsman ◽  
Victoria Aleksandrovna Smoliy ◽  
Andrey Sergeevich Kosarev ◽  
Roman Vladimirovich Bezuglov
Keyword(s):  
Foaming Agents ◽  
Foamed Slag ◽  
Slag Glass ◽  
Foamed Slag Glass

scholarly journals Alternative foaming agents for fabrication of glass foam

2021 ◽  
Vol 11 (5) ◽  
pp. 39-48
Author(s):  
Ildikó Fóris ◽  
Gábor Mucsi
Keyword(s):  
Raw Materials ◽  
Powder Mixtures ◽  
Foaming Agent ◽  
Foaming Agents ◽  
Heat Treated ◽  
Specimen Density ◽  
Before And After ◽  
Different Temperatures ◽  
Glass Foam ◽  
Eggshell Waste

Glass foam tablets were produced from container glass bottles (CGB) using eggshell waste (ESW) and perlite (P) as foaming agent in different portions. The ground raw materials (CGB, ESW, P) were homogenized and pressed with hydraulic piston press machine at different pressures (in the case of P containing tablets 30 MPa and ESW containing tablets 15 MPa, 30 MPa and 40 MPa were used).The obtained glass tablets were heat treated at different temperatures (in the case of P containing tablets 800 °C, 900°C, 1000°C and 1100°C, and ESW containing tablets 600 °C, 700 °C, 800 °C and 900 °C were used). The study shows the specimen density of tablets before and after heat treatment, as well as the true density of the powder mixtures before tableting and the abrasion resistance of the glass foam products.

Application of mathematical modeling for studying the strength properties of foamed slag glass

2011 ◽  
Vol 68 (3-4) ◽  
pp. 91-94 ◽  
Author(s):  
E. A. Yatsenko ◽  
V. A. Smolii ◽  
A. S. Kosarev ◽  
N. A. Vil’bitskaya
Keyword(s):  
Mathematical Modeling ◽  
Strength Properties ◽  
Foamed Slag ◽  
Slag Glass ◽  
Foamed Slag Glass

scholarly journals Aerated Concrete Produced Using Locally Available Raw Materials

2017 ◽  
Vol 3 (4) ◽  
pp. 214-220 ◽  
Author(s):  
Faris Matalkah ◽  
Harsha Bharadwaj ◽  
Anagi Balachandra ◽  
Parviz Soroushian
Keyword(s):  
Thermal Conductivity ◽  
Raw Materials ◽  
Building Construction ◽  
Early Age ◽  
Foaming Agent ◽  
Foam Structure ◽  
Foaming Agents ◽  
Aerated Concrete ◽  
Concrete Materials ◽  
The Stability

Aerated concrete materials were developed with abundant natural materials. Aerated concrete can provide insulating qualities complemented with secondary structural attributes when used as core in sandwich composites for building construction. A hybrid binder that comprised lime and gypsum was used. Different foaming agents were considered for production of aerated concrete, including saponin that is found abundantly in different plants. Different formulations were considered, and the stability of the foam structure as well as the density and early-age compressive strength of the resulting aerated concrete were evaluated. One formulation comprising lime-gypsum binder with saponin foaming agent, with a density of 0.53 g/cm3, was further characterized through performance of thermal conductivity, split tension, flexure, elastic and shear modulus and sorptivity tests. The results pointed at the satisfactory balance of qualities provided by the aerated concrete when compared with alternative aerated concrete materials.

Investigation of the Factors Influencing the Properties and Structure of Foamed Slag Glass

2014 ◽  
Vol 71 (3-4) ◽  
pp. 111-114 ◽  
Author(s):  
E. A. Yatsenko ◽  
A. P. Zubekhin ◽  
B. M. Gol’tsman ◽  
V. A. Smolii ◽  
A. S. Kosarev
Keyword(s):  
Factors Influencing ◽  
Foamed Slag ◽  
Slag Glass ◽  
Foamed Slag Glass

Functional surfaces produced by foam coating

TAPPI Journal ◽  
2016 ◽  
Vol 15 (8) ◽  
pp. 515-521 ◽  
Author(s):  
EIJA KENTTÄ ◽  
HANNA KOSKELA ◽  
SARA PAUNONEN ◽  
KARITA KINNUNEN-RAUDASKOSKI ◽  
TUOMO HJELT
Keyword(s):  
Life Time ◽  
Silica Coating ◽  
Foaming Properties ◽  
Coated Paper ◽  
Paper Properties ◽  
Foaming Agent ◽  
Foaming Agents ◽  
Size Stability ◽  
Stability Measurement ◽  
Standard Paper

This paper reports experiments on silica coating formulations that are suitable for application as a thin pigment layer with foam coating technique on a paper web. To understand the foaming properties of nanosilica dispersions, the critical micelle concentration, foam half-life time, and foam bubble size stability were determined with three different foaming agents. The results indicate that the bubble stability measurement is a useful characterization method for foam coating purposes. Pilot foam coating trials were done and the effects of the chosen foaming agents were studied on the properties of the nanosilica-coated paper. The surface hydrophilicity of silica coated paper was related not only to silica pigment, but also to the chemical nature of the foaming agent. Standard paper properties were not affected by the thin silica coating.

Control of the Structure and Properties of Acoustic Materials on the Basis of Foam Glass Composites

2018 ◽  
Vol 760 (6) ◽  
pp. 41-44 ◽  
Author(s):  
V.S. LESOVIK ◽  
◽  
S.V. ALEKSEEV ◽  
I.V. BESSONOV ◽  
S.S. VAISERA ◽  
...  
Keyword(s):  
Foam Glass ◽  
Structure And Properties ◽  
Glass Composites
Sign in / Sign up

Export Citation Format

Share Document