YBCO Bulk Superconductors with Sm Addition

2017 ◽  
Vol 891 ◽  
pp. 483-488 ◽  
Author(s):  
Daniela Volochová ◽  
Vitaliy Antal ◽  
Jozef Kováč ◽  
Pavel Diko
Keyword(s):  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Superconducting Properties ◽  
Ybco Bulk ◽  
Pinning Centers ◽  
Bulk Superconductors ◽  
Powder Addition ◽  
Current Densities ◽  
Precursor Powders

The influence of Sm addition on the microstructure and superconducting properties of Y-Ba-Cu-O (YBCO) bulk superconductors has been studied. Precursor powders YBa2Cu3O7-δ (Y-123), Y2O3 and CeO2 were enriched with different amounts of SmBa2Cu3Oy (Sm-123) or Sm2O3 powders with the aim to increase critical current density, Jc,by introducing additional pinning centers. YBCO bulk superconductors with SmBa2Cu3Oy (Y123-Sm) or Sm2O3 (Y123-SmO) powder addition were prepared by the optimized top seeded melt growth process in the form of single grains. Microstructure analysis revealed that Sm2O3 addition leads to a higher amount of smaller Y2BaCuO5 (Y-211) particles, what is related to high critical current densities (Jc ~ 7 x 104 A/cm2) of the YBCO samples with Sm2O3 addition in low magnetic fields. The effect of Sm addition in the form of SmBa2Cu3Oy as well as Sm2O3 powder on Y2BaCuO5 particle size, critical temperature, Tc, and critical current density, Jc, is reported.

Transport Critical Current Density and Flux Pinning Enhancement in Nano-Sized PbO and HfO2 Added (Bi1.6Pb0.4)Sr2Ca2Cu3O10 Superconductor

2015 ◽  
Vol 1108 ◽  
pp. 85-90
Author(s):  
Nabil A.A. Yahya ◽  
R. Abd-Shukor
Keyword(s):  
Particle Size ◽  
Transition Temperature ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Flux Pinning ◽  
Homogeneous Distribution ◽  
Transport Critical Current Density ◽  
Superconducting Properties ◽  
Pinning Centers

A comparative study on the effect of PbO (10-30 nm) and HfO2 (60-80 nm) additions on the superconducting properties of (Bi1.6Pb0.4)Sr2Ca2Cu3O10 ((Bi,Pb)-2223) superconductor in the bulk form was carried out. The structure and the microstructure of prepared samples were examined by powder XRD and SEM, respectively. The transition temperature Tc and critical current density Jc was determined by standard dc four-probe method. SEM micrographs showed a homogeneous distribution of Pb and Hf in the samples. It was observed that PbO and HfO2 additions enhanced Jc for all added samples. Jc was the highest for x= 0.05 wt. % of PbO (1130 mA/cm2 at 77 K and 1930 mA/cm2 at 30 K) and HfO2 (900 mA/cm2 at 77 K and 1760 mA/cm2 at 30 K) addition. This study showed that the addition of PbO and HfO2 nanopowder provided extra flux pinning centers in the (Bi, Pb)-2223. PbO with smaller particle size showed higher Jc compared with HfO2 which has a larger particle size.

Facet Topography and Dislocation Structure as a Possible Source for Electrical Heterogeneity in [001] TILT Bicrystals of YBa2Cu3O7-δ

1996 ◽  
Vol 54 ◽  
pp. 338-339
Author(s):  
I-Fei Tsu ◽  
D.L. Kaiser ◽  
S.E. Babcock
Keyword(s):  
Grain Boundary ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Electromagnetic Properties ◽  
Length Scale ◽  
Density Values ◽  
Current Densities ◽  
Applied Fields ◽  
A Current

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.

Effect of ZnO Nano-Oxide Addition on the Superconducting Properties of the (Bi.Pb)2223 Phase

2011 ◽  
Vol 324 ◽  
pp. 241-244 ◽  
Author(s):  
R. Mawassi ◽  
R. Awad ◽  
Mohamad Roumie ◽  
M. Kork ◽  
I. Hassan
Keyword(s):  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Flux Pinning ◽  
High Temperature Superconductors ◽  
Weak Links ◽  
Superconducting Properties ◽  
X Ray ◽  
Weight Percentage ◽  
Nano Oxide

The major limitation of Bi-system superconductor applications is the intergrain weak links and weak flux pinning capability producing low critical current density of the Bibased phases. In order to enhance these characteristics and other superconducting properties, effective flux pinning centers are introduced into high temperature superconductors. In this work, different weight percentages of ZnO nano oxide were introduced at the final stage of the Bi1.8Pb0.4Sr2Ca2Cu3O10-y superconductor preparation process. Phase characterization was completed by X-ray diffraction (XRD). Exact constitution of the samples was determined using particle induced X-ray emission (PIXE). Granular and microstructure were investigated using scanning electron microscopy (SEM). Electrical resistivity as function of the temperature was carried to evaluate the relative performance of samples, and finally, E-J characteristic curves were obtained at 77K. Using 0.4 ZnO weight percentage, the electrical and granular properties were greatly enhanced, indicating more efficient pinning mechanisms. A critical current density of 949 A/cm2 was obtained which represents more than twice the value obtained for the pure sample (Jc= 445 A/cm2).

Effect of Co0.5Ni0.5Fe2O4 Nanoparticles Addition in Ag-Sheathed Bi-2223 Superconductor Tapes Prepared by Co-Precipitation Method

2020 ◽  
Vol 981 ◽  
pp. 59-65
Author(s):  
Muhammad Hafiz Mazwir ◽  
Bryan Andrew Balasan ◽  
Farah Hanani Zulkifli ◽  
Roslan Abd-Shukor
Keyword(s):  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Magnetic Oxide ◽  
Pinning Centers ◽  
X Ray ◽  
Co Precipitation ◽  
Powder In Tube

Effect of complex magnetic oxide Co0.5Ni0.5Fe2O4 (CNFO) nanoparticles addition in (Bi1.6Pb0.4)Sr2Ca2Cu3O10 (Bi-2223) superconductor tapes was investigated. Ultrafine Bi-2223 powder precursor was prepared via co-precipitation method and was added with 0.01 – 0.05 wt.% Co0.5Ni0.5Fe2O4 nanoparticles during the final heating stage. The sample with 0.01 wt.% addition, Bi-2223(CNFO)0.01 was found to have the highest critical current density, Jc. This sample were then chosen to be fabricated into Ag-sheathed superconductor tapes using the powder-in-tube (PIT) method. The tapes were sintered for 50 and 100 h at 845 °C. The phase, microstructure and Jc of the samples were determined by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and four point probe, respectively. Jc of Ag-sheathed Bi-2223(CNFO)0.01 tapes sintered for 100 h was 19830 A/cm2 at 30 K and 3970 A/cm2 at 77 K compared to tapes without addition which showed a much lower Jc(6370 A/cm2 at 30 K). This study showed that CNFO nanoparticles could act as an effective flux pinning centers to enhance the critical current density in the Bi-2223 superconductor.

Sign in / Sign up

Export Citation Format

Share Document