Digital Receiving of OQPSK Signals Dedicated for Maritime Mechatronic Systems

2011 ◽  
Vol 180 ◽  
pp. 366-371
Author(s):  
Ryszard Studański
Keyword(s):  
Signal Processing ◽  
Digital Signal Processing ◽  
Wide Spectrum ◽  
Digital Signal ◽  
Mechatronic Systems ◽  
To Receive

In this paper authors present a possible way to receive a narrowband digital signal that was previously registered in a wide spectrum. To begin with a scheme of receiving equipment is shown. Next, the digital signal processing leading to extraction information from narrowband OQPSK signal is described.

scholarly journals Digital Signal Processing–based Dynamic Mass Measurement System for Egg Weighing Process

2017 ◽  
Vol 50 (4) ◽  
pp. 97-102 ◽  
Author(s):  
İsmail Yabanova
Keyword(s):  
Signal Processing ◽  
Digital Signal Processing ◽  
Mass Measurement ◽  
Digital Signal ◽  
Load Cell ◽  
Analog To Digital ◽  
Manufactured Products ◽  
Measurement Signal ◽  
Dynamic Weighing ◽  
To Receive

In this study, an electronic, mechanical and software system, where the weight measurements of eggs can be performed dynamically, is developed. As the speed is an important factor in the production sector, it is of significant importance that the manufactured products be weighed in a rapid and correct manner. For this reason, systems where the products are dynamically weighed are developed. However, as the products are weighed while they are moving in dynamic weighing systems, undesired disturbing effects occur on the measurement signal. The product weights must be measured at required speeds by eliminating this disturbing effect. Dynamic weighing is performed using a load cell. A digital signal processing–based card has been developed to measure the signal received from the load cell and to send it to the computer. The eggs are weighed while they are moving as they roll over the load cell. A program has been developed using the LabVIEW program to receive, filter and analyze the data read and sent to the computer by digital signal processing. In addition, the configuration adjustments of the integrated analog-to-digital converter that reads data from the load cell can also be performed thanks to this program.

Method of estimation of hidden correlation of narrowband noise signals

2019 ◽  
pp. 34-39 ◽  
Author(s):  
E.I. Chernov ◽  
N.E. Sobolev ◽  
A.A. Bondarchuk ◽  
L.E. Aristarhova
Keyword(s):  
Signal Processing ◽  
Digital Signal Processing ◽  
New Technology ◽  
Digital Signal ◽  
Measuring Instruments ◽  
Central Frequency ◽  
Pearson Criterion ◽  
Useful Signal ◽  
Band Limited ◽  
Narrowband Noise

The concept of hidden correlation of noise signals is introduced. The existence of a hidden correlation between narrowband noise signals isolated simultaneously from broadband band-limited noise is theoretically proved. A method for estimating the latent correlation of narrowband noise signals has been developed and experimentally investigated. As a result of the experiment, where a time frag ent of band-limited noise, the basis of which is shot noise, is used as the studied signal, it is established: when applying the Pearson criterion, there is practically no correlation between the signal at the Central frequency and the sum of signals at mirror frequencies; when applying the proposed method for the analysis of the same signals, a strong hidden correlation is found. The proposed method is useful for researchers, engineers and metrologists engaged in digital signal processing, as well as developers of measuring instruments using a new technology for isolating a useful signal from noise – the method of mirror noise images.

Sign in / Sign up

Export Citation Format

Share Document