scholarly journals Physical and geochemical observations on land reclamation of open-pit coal mines, Alberta and British Columbia

1989 ◽  
Author(s):  
L E Jackson
Author(s):  
T. V. Galanina ◽  
M. I. Baumgarten ◽  
T. G. Koroleva

Large-scale mining disturbs wide areas of land. The development program for the mining industry, with an expected considerable increase in production output, aggravates the problem with even vaster territories exposed to the adverse anthropogenic impact. Recovery of mining-induced ecosystems in the mineral-extracting regions becomes the top priority objective. There are many restoration mechanisms, and they should be used in integration and be highly technologically intensive as the environmental impact is many-sided. This involves pollution of water, generation of much waste and soil disturbance which is the most typical of open pit mining. Scale disturbance of land, withdrawal of farming land, land pollution and littering are critical problems to the solved in the first place. One of the way outs is highquality reclamation. This article reviews the effective rules and regulations on reclamation. The mechanism is proposed for the legal control of disturbed land reclamation on a regional and federal level. Highly technologically intensive recovery of mining-induced landscape will be backed up by the natural environment restoration strategy proposed in the Disturbed Land Reclamation Concept.


2017 ◽  
Vol 12 ◽  
pp. 96-108
Author(s):  
E.L. Karibzhanova ◽  
◽  
A.E. Safronov ◽  
O.O. Skryabin ◽  
V.V. Semenyaka ◽  
...  

2017 ◽  
Vol 12 (2) ◽  
pp. 113-122 ◽  
Author(s):  
Mark KORYAGIN ◽  
Artyom VORONOV
Keyword(s):  

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Le VAN CANH ◽  
Cao XUAN CUONG ◽  
Nguyen QUOC LONG ◽  
Le THI THU HA ◽  
Tran TRUNG ANH ◽  
...  

Open-pit coal mines’ terrain is often complex and quickly and frequently changes. Therefore, topographic surveys of open-pit mines are undertaken on a daily basis. While these tasks are very time-consuming and costly with traditional methods such as total station and GNSS, the unmanned aerial vehicle (UAV) based method can be more efficient. This method is a combination of the “Structure from motion” (SfM) photogrammetry technique and UAV photogrammetry which has been widely used in topographic surveying. With an increasing popularity of RTK-enabled drones, it is becoming even more powerful method. While the important role of ground control points (GCP) in the accuracy of digital surface model (DSM) generated from images acquired by “traditional” UAVs (not RTK-enabled drones) has been proved in many previous studies, it is not clear in the case of RTK-enabled drones, especially for complex terrain in open-pit coal mines. In this study, we experimentally investigated the influence of GCP regarding its numbers and distribution on the accuracy of DSM generation from images acquired by RTK-enabled drones in open-pit coal mines. In addition, the Post Processing Kinematic (PPK) mode was executed over a test field with the same flight altitude. DSM generation was performed with several block control configurations: PPK only, PPK with one GCP, and PPK with two GCPs. Several positions of GCPs were also examined to test the optimal locations for placing GCPs to achieve accurate DSMs. The results show that the horizontal and vertical accuracy given by PPK only were 9.3 and 84.4 cm, respectively. However, when adding at least one GCP, the accuracy was significantly improved in both horizontal and vertical components, with RMSE for XY and Z ranging between 3.8 and 9.8 cm (with one GCP) and between 3.0 and 5.7 cm (with two GCPs), respectively. Also, the GCPs placed in the deep areas of the open-pit mine could ensure the cm-level accuracy.


Author(s):  
Zoran Marković ◽  
Miloš Milivojević ◽  
Bruijn De ◽  
Wilma Wessels ◽  
De Van ◽  
...  

2016 ◽  
Vol 94 ◽  
pp. 638-646 ◽  
Author(s):  
Huang Lei ◽  
Zhang Peng ◽  
Hu Yigang ◽  
Zhao Yang

Sign in / Sign up

Export Citation Format

Share Document