Rear Seat Child Occupant Safety in Rear-Impact Collisions

2021 ◽  
Author(s):  
Chandrashekhar Thorbole
2009 ◽  
Author(s):  
Jason Forman ◽  
Francisco Lopez-Valdes ◽  
David Lessley ◽  
Matthew Kindig ◽  
Richard Kent ◽  
...  

10.6036/10215 ◽  
2022 ◽  
Vol 97 (1) ◽  
pp. 30-34
Author(s):  
Mónica Diez Marín ◽  
JULIO ABAJO ALONSO ◽  
ALBERTO NEGRO MARNE ◽  
SUSANA MARIA ESCALANTE CASTRODEZA ◽  
MARIA TERESA FERNANDEZ

Autonomous vehicles start to be introduced on our roads and will soon become a reality. Although fatal traffic accidents will be significantly reduced, remaining fatal passenger car crashes should be taken into account to ensure the safety of users. The new highly adaptable interior designs, with totally different layouts from the current ones, may significantly impact occupant safety, especially child passenger safety. Analyzing how these new vehicles affect child safety is a challenge that needs to be addressed. The "living room" layout (face-to-face seating position) is one of the preferences of families traveling with children. Young children need further support and supervision so the possibility of rotating seats to be able to be in front of the small children is a valuable feature for parents. Therefore, new seating orientations away from the forward facing position should be taken into account to ensure children protection. The objective of this study is to evaluate child occupant safety in a "living room" seating position (a possible option in full autonomous vehicles) versus the current forward facing position. Virtual testing methodology was used to perform this study. The virtual PIPER child human body model (HBM) was used. This model is one of the only HBMs developed and validated from child PMHS data (Paediatric Post-Mortem Human Surrogate). The two configurations were defined according with the EuroNCAP child occupant protection test protocol. It was found that the "living room" layout presents worse results according to the child's head injury patterns than in forward facing position. In conclusion, attending to the new seating orientations away from the forward facing position, it is necessary to adapt the restraint systems; otherwise children could suffer potentially dangerous situations.


2013 ◽  
Vol 328 ◽  
pp. 292-296
Author(s):  
Liang Hong ◽  
Ru Hai Ge ◽  
Yun Teng Wu

The MADYMO simulation model of the rear occupant restraint system based a current car model was constructed, researching the influence of the rear seat cushion stiffness and cushion angle with the floor, the 3-point seatbelt webbing stiffness and retractor locking feature on rear-seat passenger safety in the head-on collision. Thereafter, the entire rear occupant restraint system was optimised. The result shows when the rear seat cushion stiffness is 30N/mm, the cushion angle is 25°, the safety belt stiffness is 11% and the webbing output after the retractor locks is 30mm, rear occupant would obtain the optimum protection.


2008 ◽  
Vol 1 (1) ◽  
pp. 371-382 ◽  
Author(s):  
Seong-Woo Hong ◽  
Chung-Kyu Park ◽  
Richard M. Morgan ◽  
Cing-Dao Kan ◽  
Shinhee Park ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document