Extraction of alumina from low grade, highly siliceous bauxite ore from Khushab, Pakistan, using sulfuric acid process

Author(s):  
S Hussain ◽  
M Iqbal
2020 ◽  
Vol 989 ◽  
pp. 559-563
Author(s):  
Ashimkhan T. Kanayev ◽  
Khussain Valiyev ◽  
Aleksandr Bulaev

The goal of the present work was to perform bioleaching of uranium from low grade ore from Vostok deposit (Republic of Kazakhstan), which was previously subjected to long-term acid leaching. The ore initially contained from 0.15 to 0.20% of uranium in the form of uraninite, but ore samples used in the study contained about 0.05% of uranium, as it was exhausted during acid leaching, and uranium was partially leached. Representative samples of ore were processed in 1 m columns, leach solutions containing 5, 10, 20 g/L of sulfuric acid and bacterial cells (about 104) were percolated through the ore. Leaching was performed at ambient temperature for 70 days. In one of the percolators, the leaching was performed with leaching solution containing 10 g/L of H2SO4, cells of A. ferrooxidans, and 0.5 g/L of formaldehyde. Leaching with the solution containing 5, 10, and 20 g/L of sulfuric acid made it possible to extract 50, 53, and 58% of uranium. Addition of formaldehyde in leach solution led to the decrease in uranium extraction extent down to 37%. Thus, the results of the present work demonstrated that uranium ore exhausted during long-term acid leaching may be successfully subjected to bioleaching, that allows extracting residual quantities of uranium. Leaching rate of uranium from exhausted ore depended on both sulfuric acid concentration and microbial activity of bacteria isolated from acid mine drainage, formed on uranium deposit. In the same time, acid mine drainage may be used as a source of inoculate, to start bioleaching process.


2020 ◽  
Vol 299 ◽  
pp. 1104-1108
Author(s):  
Ashimkhan T. Kanayev ◽  
Khussain Valiyev ◽  
Aleksandr Bulaev

The effect of different oxidants on extraction of uranium from low grade ore was studied. Leaching was performed using sulfuric acid solutions at a concentration of 10 to 30%. Ferric sulfate Fe2(SO4)3, ammonium persulphate (NH4)2S2O8, and potassium permanganate KMnO4 at different concentrations were used as oxidants in different variants of the experiment. In addition, solutions collected at Vostok deposit containing 6.86 g/L Fe3+ and 106 cells/mL of the bacteria Acidithiobacillusferrooxidans were used for leaching. The rate of uranium extraction with sulfuric acid solutions without oxidants was low and did not exceed 19.4%. Addition of oxidants made it possible to increase rate of uranium extraction. In the presence of ferric sulfate, ammonium persulphate, and potassium permanganate rates of uranium extraction were up to 68, 95.2, and 69.6%, respectively. The rate of uranium leaching in the experiments with the AMD sample was high and reached about 95%. Therefore, it can be concluded that using not only oxidizing agents, but AMD, which are formed during the natural oxidation of sulfide minerals contained in the ore of the deposit, can significantly increase the rate of uranium recovery.


Processes ◽  
2019 ◽  
Vol 7 (6) ◽  
pp. 376 ◽  
Author(s):  
Qian Zhang ◽  
Qicheng Feng ◽  
Shuming Wen ◽  
Chuanfa Cui ◽  
Junbo Liu

In this work, oxidizing roasting was combined with leaching to separate copper, lead, and zinc from a concentrate obtained by bulk flotation of a low-grade ore sourced from the Jiama mining area of Tibet. The flotation concentrate contained 7.79% Cu, 22.00% Pb, 4.81% Zn, 8.24% S, and 12.15% CaO; copper sulfide accounted for 76.97% of the copper, lead sulfide for 25.55% of the lead, and zinc sulfide for 67.66% of the zinc. After oxidizing roasting of the flotation concentrate, the S content in the roasting slag decreased to 0.22%, indicating that most sulfide in the concentrate was transformed to oxide, which was beneficial to leaching. The calcine was subjected to sulfuric acid leaching for separation of copper, lead, and zinc; i.e., copper and zinc were leached, and lead was retained in the residue. The optimum parameters of the leaching process were: a leaching temperature of 55 °C; sulfuric acid added at 828 kg/t calcine; a liquid:solid ratio of 3:1; and a leaching time of 1.5 h. Under these conditions, the extents of leaching of copper and zinc were 87.43% and 64.38%, respectively. Copper and zinc in the leaching solution could be further separated by electrowinning. The effects of leaching parameters on the extents of leaching of copper and zinc were further revealed by X-ray diffraction and scanning electron microscopy analysis.


Sign in / Sign up

Export Citation Format

Share Document