Design of Micro-Ring Resonator Based All Optical Signal Routers

2021 ◽  
pp. 319
Author(s):  
Rakesh Choudhary ◽  
Sushanta Mahanty ◽  
Ajay Kumar ◽  
Rajiv Kumar ◽  
Basudeba Behera
Keyword(s):  
Ring Resonator ◽  
Optical Signal ◽  
All Optical

An all optical photonic crystal half adder suitable for optical processing applications

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Hamed Azhdari ◽  
Sahel Javahernia
Keyword(s):  
Photonic Crystal ◽  
Optical Waveguides ◽  
High Speed ◽  
Building Blocks ◽  
Optical Signal ◽  
Ring Resonators ◽  
Optical Processing ◽  
Nonlinear Photonic Crystal ◽  
Half Adder ◽  
All Optical

Abstract Increasing the speed of operation in all optical signal processing is very important. For reaching this goal one needs high speed optical devices. Optical half adders are one of the important building blocks required in optical processing. In this paper an optical half adder was proposed by combining nonlinear photonic crystal ring resonators with optical waveguides. Finite difference time domain method wase used for simulating the final structure. The simulation results confirmed that the rise time for the proposed structure is about 1 ps.

Modeling and Design of Enhanced All Optical Signal Regeneration Technique

Optik ◽  
2021 ◽  
pp. 166696
Author(s):  
Bhagwan Das ◽  
M.F.L Abdullah ◽  
Fayaz Ali Dharejo ◽  
Farah Deeba ◽  
Jawad Ali ◽  
...  
Keyword(s):  
Optical Signal ◽  
Signal Regeneration ◽  
All Optical

scholarly journals All-Optical Non-Inverted Parity Generator and Checker Based on Semiconductor Optical Amplifiers

2021 ◽  
Vol 11 (4) ◽  
pp. 1499
Author(s):  
Bingchen Han ◽  
Junyu Xu ◽  
Pengfei Chen ◽  
Rongrong Guo ◽  
Yuanqi Gu ◽  
...  
Keyword(s):  
Optical Amplifiers ◽  
Signal To Noise Ratio ◽  
Low Cost ◽  
Extinction Ratio ◽  
Semiconductor Optical Amplifiers ◽  
Optical Signal ◽  
Probe Light ◽  
All Optical ◽  
Negative Effect ◽  
Parity Generator

An all-optical non-inverted parity generator and checker based on semiconductor optical amplifiers (SOAs) are proposed with four-wave mixing (FWM) and cross-gain modulation (XGM) non-linear effects. A 2-bit parity generator and checker using by exclusive NOR (XNOR) and exclusive OR (XOR) gates are implemented by first SOA and second SOA with 10 Gb/s return-to-zero (RZ) code, respectively. The parity and check bits are provided by adjusting the center wavelength of the tunable optical bandpass filter (TOBPF). A saturable absorber (SA) is used to reduce the negative effect of small signal clock (Clk) probe light to improve extinction ratio (ER) and optical signal-to-noise ratio (OSNR). For Pe and Ce (even parity bit and even check bit) without Clk probe light, ER and OSNR still maintain good performance because of the amplified effect of SOA. For Po (odd parity bit), ER and OSNR are improved to 1 dB difference for the original value. For Co (odd check bit), ER is deteriorated by 4 dB without SA, while OSNR is deteriorated by 12 dB. ER and OSNR are improved by about 2 dB for the original value with the SA. This design has the advantages of simple structure and great integration capability and low cost.

All optical NAND/NOR and majority gates using nonlinear photonic crystal ring resonator

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Hassan Mamnoon-Sofiani ◽  
Sahel Javahernia
Keyword(s):  
Photonic Crystal ◽  
Ring Resonator ◽  
Logic Gates ◽  
Building Blocks ◽  
Optical Data ◽  
Optical Logic ◽  
Optical Logic Gates ◽  
Nonlinear Photonic Crystal ◽  
All Optical ◽  
Photonic Crystal Ring Resonator

Abstract All optical logic gates are building blocks for all optical data processors. One way of designing optical logic gates is using threshold switching which can be realized by combining an optical resonator with nonlinear Kerr effect. In this paper we showed that a novel structure consisting of nonlinear photonic crystal ring resonator which can be used for realizing optical NAND/NOR and majority gates. The delay time of the proposed NAND/NOR and majority gates are 2.5 ps and 1.5 ps respectively. Finite difference time domain and plane wave expansion methods were used for simulating the proposed optical logic gates. The total footprint of the proposed structure is about 988 μm2.

A Novel Semiconductor Ring Laser device Aimed for All-optical Signal processing

2008 ◽  
Author(s):  
Zhuoran Wang ◽  
Guy Verschaffelt ◽  
Gabor Mezosi ◽  
Marc Sorel ◽  
Jan Danckaert ◽  
...  
Keyword(s):  
Signal Processing ◽  
Ring Laser ◽  
Optical Signal Processing ◽  
Optical Signal ◽  
Laser Device ◽  
All Optical ◽  
Semiconductor Ring Laser

Three-wavelength device for all-optical signal processing

1994 ◽  
Vol 19 (12) ◽  
pp. 889 ◽  
Author(s):  
R. J. Manning ◽  
D. A. O. Davies
Keyword(s):  
Signal Processing ◽  
Optical Signal Processing ◽  
Optical Signal ◽  
All Optical
Sign in / Sign up

Export Citation Format

Share Document