scholarly journals Complex Power Flow Sensitivity Index based Optimal Location and Tuning of Thyristor Controlled Series Capacitor using BAT Algorithm to enhance Line based Voltage Stability

Author(s):  
B.Venkateswara Rao ◽  
G.V.Nagesh Kumar

Modern electric power utilities are facing many challenges due to increasing complexity in their operation and structure. In the recent times, one of the problems that got wide attention is the power system instabilities due to lack of new transmission facilities. Existing transmission facilities can be better utilized by installing Flexible AC Transmission System (FACTS) devices. The TCSC is the most effective FACTS device used to increase the power transferable capabilities of the transmission line. This paper presents a Sensitivity analysis based Complex Power Flow Sensitivity Index (CPSI) calculated for placing the TCSC at an appropriate location. Once the location to install the TCSC is determined, the optimal tuning of the TCSC is determined through BAT Algorithm. The BAT Algorithm is implemented on multi-criterion objective function to minimize total real power loss, total voltage magnitude deviations, the fuel cost of total real power generation and the branch loading to obtain the Optimal Power Flow. Simulations have been carried out in MATLAB software for the IEEE 57-bus system. The results have been taken for BAT Algorithm based Optimal Power Flow without and with TCSC. The results obtained with BAT Algorithm were compared with Genetic Algorithm (GA).

2015 ◽  
Vol 6 (4) ◽  
pp. 69-88 ◽  
Author(s):  
B. Venkateswara Rao ◽  
G. V. Nagesh Kumar

In this paper a multi objective optimal power flow (OPF) is obtained by using BAT search algorithm (BAT) with Unified power flow controller (UPFC). UPFC is a voltage source converter type Flexible Alternating Current Transmission System (FACTS) device. It is able to control the voltage magnitudes, voltage angles and line impedances individually or simultaneously. UPFC along with BAT algorithm is used to minimize the total real power generation cost, real power losses in OPF control. The BAT algorithm based OPF has been examined and tested on a 5 bus test system and modified IEEE 30 bus system without and with UPFC. The results obtained with BAT algorithm are compared with Differential Evaluation (DE).


2017 ◽  
Vol 48 (8) ◽  
pp. 2304-2314 ◽  
Author(s):  
Yanbin Yuan ◽  
Xiaotao Wu ◽  
Pengtao Wang ◽  
Xiaohui Yuan

Author(s):  
Uma Velayutham ◽  
Lakshmi Ponnusamy ◽  
Gomathi Venugopal

Purpose The purpose of this paper is to optimally locate and size the FACTS device, namely, interline power flow controller in order to minimize the total cost and relieve congestion in a power system. This security analysis helps independent system operator (ISO) to have a better planning and market clearing criteria during any operating state of the system. Design/methodology/approach A multi-objective optimization problem has been developed including real power performance index (RPPI) and expected security cost (ESC). A security constrained optimal power flow has been developed as expected security cost optimal power flow problem which gives the probabilities of operating the system in all possible pre-contingency and post-contingency states subjected to various equality and inequality constraints. Maximizing social welfare is the objective function considered for normal state, while minimizing compensations for generations rescheduling and maximizing social welfare are the objectives in case of contingency states. The proposed work is viewed as a two level problem wherein the upper-level problem is to optimally locate IPFC using RPPI and the lower-level problem is to minimize the ESC subjected to various system constraints. Both upper-level and lower-level problem are solved using particle swarm optimization and The performance of the proposed algorithm is tested under severe line outages and has been validated using IEEE 30 bus system. Findings The proposed methodology shows that IPFC controls the power flows in the network without generation rescheduling or topological changes and thus improves the performance of the system. It is found that the benefit achieved in the ESC due to the installation of IPFC is greater than the annual investment cost of the device. ISO cannot achieve minimum total system cost by merely rescheduling generators. Instead of rescheduling, FACTS devices can be used for compensation by achieving minimum cost. IPFC can be used to compensate the congested lines and transfer cheaper power from generators to consumers. Originality/value Operational reliability, financial profitability and efficient utilization of the existing transmission system infrastructure has been achieved using single FACTS device. Instead of using multiple FATCS devices, if a single FACTS device like IPFC which itself can compensate several transmission lines is used, then in addition to the facility for independently controlled reactive (series) compensation of each individual line, it provides a capability to directly transfer real power between the compensated lines. Hence an attempt has been made in this paper to incorporate IPFC for relieving congestion in a deregulated environment. However, no previous researches have considered incorporating compensation of multi-transmission line using single IPFC in minimizing ESC. Thus, in this paper, the authors indicate how much the ESC is reduced by installing IPFC.


Sign in / Sign up

Export Citation Format

Share Document