Estimating optical extinction of liquid water clouds in the cloud base region
Abstract. Accurate lidar-based measurements of cloud optical extinction, even though perhaps limited to the cloud base region, are useful. Arguably, more advanced lidar techniques (e.g. Raman) should be applied for this purpose. However, simpler polarization and backscatter lidars offer a number of practical advantages (e.g. better resolution, more continuous and numerous time series). In this paper we present a backscatter lidar signal inversion method for the retrieval of the cloud optical extinction in the cloud base region. Though a numerically stable method for inverting lidar signals using a far-end boundary value solution has been earlier demonstrated and may be considered well-established (i.e. the Klett inversion), the application to high-extinction clouds remains problematic. This is due to the inhomogeneous nature of real clouds, the finite range-resolution of many practical lidar systems and multiple-scattering effects. We use an inversion scheme where a backscatter lidar signal is inverted based on the estimated value of cloud extinction at the far end of the cloud and apply a correction for multiple-scattering within the cloud and a range resolution correction. By applying our technique to the inversion of synthetic lidar data, we show that for a retrieval of up to 90 m from the cloud base it is possible to obtain the cloud optical extinction within the cloud with an error better than 5 %. In relative terms, the accuracy of the method is smaller at the cloud base but improves with the range within the cloud until 45 m and deteriorates slightly until reaching 90 m from the cloud base.