scholarly journals A high-resolution inland surface water body dataset for the tundra and boreal forests of North America

2021 ◽  
Author(s):  
Yijie Sui ◽  
Min Feng ◽  
Chunling Wang ◽  
Xin Li
Keyword(s):  
Surface Water ◽  
North America ◽  
Water Body ◽  
Boreal Forests ◽  
Water Bodies ◽  
Permafrost Region ◽  
Morphological Attributes ◽  
Complete Representation ◽  
Surface Water Body ◽  
Sentinel 2

Abstract. Inland surface waters are abundant in the tundra and boreal forests in North America, essential to environments and human societies but vulnerable to climate changes. These high-latitude water bodies differ greatly in their morphological and topological characteristics related to the formation, type, and vulnerability. In this paper we present an inland surface water body inventory (SWBI) dataset for the tundra and boreal forests of North America. Nearly 6.7 million water bodies were identified, with approximately 6 million (~90 %) of them smaller than 0.1 km2. The dataset provides geometry coverage and morphological attributes for every water body. During this study we developed an automated approach for detecting surface water extent and identifying water bodies in the 10 m resolution Sentinel-2 multispectral satellite data to enhance the capability for delineating small water bodies and their morphological attributes. The approach was applied to the Sentinel-2 data acquired in 2019 to produce the water body dataset for the entire tundra and boreal forests in North America, providing a more complete representation of the region than existing regional datasets, e.g., Permafrost Region Pond and Lake (PeRL). Total accuracy of the detected water extent by SWBI dataset was 96.36 % by comparing to interpreted data for locations randomly sampled across the region. Compared to the 30 m or coarser resolution water datasets, e.g., JRC GSW yearly water history, HydroLakes, and Global Lakes and Wetlands Database (GLWD), the SWBI provided an improved ability on delineating water bodies, and reported higher accuracies in the size, number, and perimeter attributes of water body by comparing to PeRL and interpreted regional dataset. This dataset is available on the National Tibetan Plateau/Third Pole Environment Data Center (TPDC, http://data.tpdc.ac.cn): DOI: 10.11888/Hydro.tpdc.271021 (Feng et al., 2020).

scholarly journals Urban surface water body detection with suppressed built-up noise based on water indices from Sentinel-2 MSI imagery

2018 ◽  
Vol 219 ◽  
pp. 259-270 ◽  
Author(s):  
Xiucheng Yang ◽  
Qiming Qin ◽  
Pierre Grussenmeyer ◽  
Mathieu Koehl
Keyword(s):  
Surface Water ◽  
Water Body ◽  
Urban Surface ◽  
Surface Water Body ◽  
Water Indices ◽  
Sentinel 2

scholarly journals Extraction of Water-body Area from High-resolution Landsat Imagery

2018 ◽  
Vol 8 (6) ◽  
pp. 4111
Author(s):  
B. Chandrababu Naik ◽  
B. Anuradha
Keyword(s):  
Surface Water ◽  
Satellite Data ◽  
Water Body ◽  
Water Area ◽  
Water Bodies ◽  
Landsat 8 ◽  
Indexing Methods ◽  
Water Index ◽  
Surface Water Body ◽  
Normalized Difference Water Index

Extraction of water bodies from satellite imagery has been broadly explored in the current decade. So many techniques were involved in detecting of the surface water bodies from satellite data. To detect and extracting of surface water body changes in Nagarjuna Sagar Reservoir, Andhra Pradesh from the period 1989 to 2017, were calculated using Landsat-5 TM, and Landsat-8 OLI data. Unsupervised classification and spectral water indexing methods, including the Normalized Difference Vegetation Index (NDVI), Normalized Difference Moisture Index (NDMI), Normalized Difference Water Index (NDWI), and Modified Normalized Difference Water Index (MNDWI), were used to detect and extraction of the surface water body from satellite data. Instead of all index methods, the MNDWI was performed better results. The Reservoir water area was extracted using spectral water indexing methods (NDVI, NDWI, MNDWI, and NDMI) in 1989, 1997, 2007, and 2017. The shoreline shrunk in the twenty-eight-year duration of images. The Reservoir Nagarjuna Sagar lost nearly around one-fourth of its surface water area compared to 1989. However, the Reservoir has a critical position in recent years due to changes in surface water and getting higher mud and sand. Maximum water surface area of the Reservoir will lose if such decreasing tendency follows continuously.

scholarly journals An Effective Water Body Extraction Method with New Water Index for Sentinel-2 Imagery

Water ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1647
Author(s):  
Wei Jiang ◽  
Yuan Ni ◽  
Zhiguo Pang ◽  
Xiaotao Li ◽  
Hongrun Ju ◽  
...  
Keyword(s):  
Surface Water ◽  
Water Body ◽  
Extraction Method ◽  
Spectral Characteristics ◽  
Water Bodies ◽  
The Novel ◽  
Water Index ◽  
Novel Method ◽  
Effective Water ◽  
Sentinel 2

Surface water bodies, such as rivers, lakes, and reservoirs, play an irreplaceable role in global ecosystems and climate systems. Sentinel-2 imagery provides new high-resolution satellite remote sensing data. Based on the analysis of the spectral characteristics of the Sentinel-2 satellite, a novel water index called the Sentinel-2 water index (SWI) that is based on the vegetation-sensitive red-edge band (Band 5) and shortwave infrared (Band 11) bands was developed. Four representative water body types, namely, Taihu Lake, Yangtze River, Chaka Salt Lake, and Chain Lake, were selected as study areas to conduct a water body extraction performance comparison with the normalized difference water index (NDWI). We found that (1) the contrast value of the SWI was larger than that of the NDWI in terms of various water body types, including purer water, turbid water, salt water, and floating ice, which suggested that the SWI could achieve better enhancement performance for water bodies. An (2) effective water body extraction method was proposed by integrating the SWI and Otsu algorithm, which could accurately extract various water body types with high overall accuracy. The (3) method effectively extracted large water bodies and wide river channels by suppressing shadow noise in urban areas. Our results suggested that the novel method can achieve efficient water body extraction for rapidly and accurately extracting various water bodies from Sentinel-2 data and the novel method has application potential for larger-scale surface water mapping.

scholarly journals Variations Size Investigation in Vegetation and Surface Water Body for Central Part of Iraq using Satellite Imagery Bands

2020 ◽  
Vol 928 ◽  
pp. 022064
Author(s):  
Malik R. Abbas ◽  
Mahir Mahmod Hason ◽  
Baharin Bin Ahmad ◽  
Abd Wahid Bin Rasib ◽  
Talib R. Abbas
Keyword(s):  
Surface Water ◽  
Satellite Imagery ◽  
Water Body ◽  
Surface Water Body

scholarly journals Downscaling MODIS Surface Reflectance to Improve Water Body Extraction

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
Xianghong Che ◽  
Min Feng ◽  
Hao Jiang ◽  
Jia Song ◽  
Bei Jia
Keyword(s):  
Surface Water ◽  
Water Body ◽  
Terrestrial Ecosystems ◽  
Water Area ◽  
Water Bodies ◽  
Tibet Plateau ◽  
Surface Reflectance ◽  
Discrimination Ability ◽  
Automated Method ◽  
Landsat 7

Inland surface water is essential to terrestrial ecosystems and human civilization. Accurate mapping of surface water dynamic is vital for both scientific research and policy-driven applications. MODIS provides twice observation per day, making it perfect for monitoring temporal water dynamic. Although MODIS provides two bands at 250 m resolution, accurately deriving water area always depends on observations from the spectral bands with 500 m resolution, which limits its discrimination ability over small lakes and rivers. The paper presents an automated method for downscaling the 500 m MODIS surface reflectance (SR) to 250 m to improve the spatial discrimination of water body extraction. The method has been tested at Co Ngoin and Co Bangkog in Qinghai-Tibet plateau. The downscaled SR and the derived water bodies were compared to SR and water body mapped from Landsat-7 ETM+ images were acquired on the same date. Consistency metrics were calculated to measure their agreement and disagreement. The comparisons indicated that the downscaled MODIS SR showed significant improvement over the original 500 m observations when compared with Landsat-7 ETM+ SR, and both commission and omission errors were reduced in the derived 250 m water bodies.

scholarly journals STUDY ON THE WATER BODY EXTRACTION USING GF-1 DATA BASED ON ADABOOST INTEGRATED LEARNING ALGORITHM

2020 ◽  
Vol XLII-3/W10 ◽  
pp. 641-648
Author(s):  
J. Y. Sun ◽  
G. Z. Wang ◽  
G. J. He ◽  
D. C. Pu ◽  
W. Jiang ◽  
...  
Keyword(s):  
Surface Water ◽  
Water Body ◽  
Rapid Development ◽  
Kappa Coefficient ◽  
Water Bodies ◽  
Integrated Learning ◽  
Visual Interpretation ◽  
Adaboost Algorithm ◽  
Classification Time ◽  
Better Than

Abstract. Surface water system is an important part of global ecosystem, and the changes in surface water may lead to disasters, such as drought, waterlog, and water-borne diseases. The rapid development of remote sensing technology has supplied better strategies for water bodies extraction and further monitoring. In this study, AdaBoost and Random Forest (RF), two typical algorithms in integrated learning, were applied to extract water bodies in Chaozhou area (mainly located in Guangzhou Province, China) based on GF-1 data, and the Decision Tree (DT) was used for comparative tests to comprehensively evaluate the performance of classification algorithms listed above for surface water body extraction. The results showed that: (1) Compared with visual interpretation, AdaBoost performed better than RF in the extraction of several typical water bodies, such as rivers, lakes and ponds Moreover, the water extraction results of the strong classifiers using AdaBoost or RF were better than the weak basic classifiers. (2) For the quantitative accuracy statistics, the overall accuracy (96.5%) and kappa coefficient (93%) using AdaBoost exceeded those using RF (5.3% and 10.6%), respectively. The classification time of AdaBoost increased by 403 seconds and 918 seconds relative to RF and DT methods. However, in terms of visual interpretation, quantitative statistical accuracy and classification time, AdaBoost algorithm was more suitable for the water body extraction. (3) For the sample proportion comparison experiment of AdaBoost, four sampling proportions (0.1%, 0.2%, 1% and 2%) were chosen and 0.1% sampling proportion reached the optimum classification accuracy (93.9%) and kappa coefficient (87.8%).

scholarly journals Recognition of Water Colour Anomaly by Using Hue Angle and Sentinel 2 Image

2020 ◽  
Vol 12 (4) ◽  
pp. 716 ◽  
Author(s):  
Yelong Zhao ◽  
Qian Shen ◽  
Qian Wang ◽  
Fan Yang ◽  
Shenglei Wang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Water Body ◽  
Large Scale ◽  
Measured Data ◽  
Water Bodies ◽  
Polluted Water ◽  
Water Colour ◽  
Hue Angle ◽  
Anomalous Water ◽  
Sentinel 2

As polluted water bodies are often small in area and widely distributed, performing artificial field screening is difficult; however, remote-sensing-based screening has the advantages of being rapid, large-scale, and dynamic. Polluted water bodies often show anomalous water colours, such as black, grey, and red. Therefore, the large-scale recognition of suspected polluted water bodies through high-resolution remote-sensing images and water colour can improve the screening efficiency and narrow the screening scope. However, few studies have been conducted on such kinds of water bodies. The hue angle of a water body is a parameter used to describe colour in the International Commission on Illumination (CIE) colour space. Based on the measured data, the water body with a hue angle greater than 230.958° is defined as a water colour anomaly, which is recognised based on the Sentinel-2 image through the threshold set in this study. The results showed that the hue angle of the water body was extracted from the Sentinel-2 image, and the accuracy of the hue angle calculated by the in situ remote-sensing reflectance Rrs (λ) was evaluated, where the root mean square error (RMSE) and mean relative error (MRE) were 4.397° and 1.744%, respectively, proving that this method is feasible. The hue angle was calculated for a water colour anomaly and a general water body in Qiqihar. The water body was regarded as a water colour anomaly when the hue angle was >230.958° and as a general water body when the hue angle was ≤230.958°. High-quality Sentinel-2 images of Qiqihar taken from May 2016 to August 2019 were chosen, and the position of the water body remained unchanged; there was no error or omission, and the hue angle of the water colour anomaly changed obviously, indicating that this method had good stability. Additionally, the method proposed is only suitable for optical deep water, not for optical shallow water. When this method was applied to Xiong’an New Area, the results showed good recognition accuracy, demonstrating good universality of this method. In this study, taking Qiqihar as an example, a surface survey experiment was conducted from October 14 to 15, 2018, and the measured data of six general and four anomalous water sample points were obtained, including water quality terms such as Rrs (λ), transparency, water colour, water temperature, and turbidity.

scholarly journals Combining Multi-Sensor Satellite Imagery to Improve Long-Term Monitoring of Temporary Surface Water Bodies in the Senegal River Floodplain

2020 ◽  
Vol 12 (19) ◽  
pp. 3157
Author(s):  
Andrew Ogilvie ◽  
Jean-Christophe Poussin ◽  
Jean-Claude Bader ◽  
Finda Bayo ◽  
Ansoumana Bodian ◽  
...  
Keyword(s):  
Surface Water ◽  
Water Bodies ◽  
Landsat 8 ◽  
Site Specific ◽  
Senegal River ◽  
Landsat 7 ◽  
Long Term Monitoring ◽  
Term Monitoring ◽  
Sentinel 2

Accurate monitoring of surface water bodies is essential in numerous hydrological and agricultural applications. Combining imagery from multiple sensors can improve long-term monitoring; however, the benefits derived from each sensor and the methods to automate long-term water mapping must be better understood across varying periods and in heterogeneous water environments. All available observations from Landsat 7, Landsat 8, Sentinel-2 and MODIS over 1999–2019 are processed in Google Earth Engines to evaluate and compare the benefits of single and multi-sensor approaches in long-term water monitoring of temporary water bodies, against extensive ground truth data from the Senegal River floodplain. Otsu automatic thresholding is compared with default thresholds and site-specific calibrated thresholds to improve Modified Normalized Difference Water Index (MNDWI) classification accuracy. Otsu thresholding leads to the lowest Root Mean Squared Error (RMSE) and high overall accuracies on selected Sentinel-2 and Landsat 8 images, but performance declines when applied to long-term monitoring compared to default or site-specific thresholds. On MODIS imagery, calibrated thresholds are crucial to improve classification in heterogeneous water environments, and results highlight excellent accuracies even in small (19 km2) water bodies despite the 500 m spatial resolution. Over 1999–2019, MODIS observations reduce average daily RMSE by 48% compared to the full Landsat 7 and 8 archive and by 51% compared to the published Global Surface Water datasets. Results reveal the need to integrate coarser MODIS observations in regional and global long-term surface water datasets, to accurately capture flood dynamics, overlooked by the full Landsat time series before 2013. From 2013, the Landsat 7 and Landsat 8 constellation becomes sufficient, and integrating MODIS observations degrades performance marginally. Combining Landsat and Sentinel-2 yields modest improvements after 2015. These results have important implications to guide the development of multi-sensor products and for applications across large wetlands and floodplains.

Extraction of Coal Under a Surface Water Body – a Strata Control Investigation

2005 ◽  
Vol 38 (5) ◽  
pp. 399-410 ◽  
Author(s):  
A. Gandhe ◽  
V. Venkateswarlu ◽  
R. N. Gupta
Keyword(s):  
Surface Water ◽  
Water Body ◽  
Strata Control ◽  
Surface Water Body
Sign in / Sign up

Export Citation Format

Share Document