scholarly journals Supplementary material to "Stochastic daily rainfall generation on tropical islands with complex topography"

Author(s):  
Lionel Benoit ◽  
Lydie Sichoix ◽  
Alison D. Nugent ◽  
Matthew P. Lucas ◽  
Thomas W. Giambelluca
2021 ◽  
Author(s):  
Lionel Benoit ◽  
Lydie Sichoix ◽  
Alison D. Nugent ◽  
Matthew P. Lucas ◽  
Thomas W. Giambelluca

Abstract. Stochastic rainfall generators are probabilistic models of rainfall space-time behavior. During parameterization and calibration, they allow the identification and quantification of the main modes of rainfall variability. Hence, stochastic rainfall models can be regarded as probabilistic conceptual models of rainfall dynamics. As with most conceptual models in Earth Sciences, the performance of stochastic rainfall models strongly relies on their adequacy in representing the rain process at hand. On tropical islands with high elevation topography, orographic rain enhancement challenges most existing stochastic models because it creates localized rains with strong spatial gradients, which break down the stationarity of rain statistics. To allow for stochastic rainfall modeling on tropical islands, despite non-stationarity, we propose a new stochastic daily rainfall generator specifically for areas with significant orographic effects. Our model relies on a preliminary classification of daily rain patterns into rain types based on rainfall space and intensity statistics, and sheds new light on rainfall variability at the island scale. Within each rain type, the spatial distribution of rainfall through the island is modeled following a meta-Gaussian approach combining empirical spatial copulas and a Gamma transform function, which allows us to generate realistic daily rain fields. When applied to the stochastic simulation of rainfall on the islands of O‘ahu (Hawai‘i, United States of America) and Tahiti (French Polynesia) in the tropical Pacific, the proposed model demonstrates good skills in jointly simulating site specific and island scale rain statistics. Hence, it provides a new tool for stochastic impact studies in tropical islands, in particular for watershed water resources management and downscaling of future precipitation projections.


2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Melisa Permatasari ◽  
M. Candra Nugraha ◽  
Etih Hartati

<p>The rain intensity is the high rainfall in unit of time. The length of rain will be reversed by the amount rain intensity. The shorter time the rain lasts, the greater of the intensity and re-period of its rain. The value of rain intensity is required to calculate the flood discharge plan on the drainage system planning area in East Karawang district. Determining the value rain intensity is required the maximum daily rainfall data obtained from the main observer stations in the Plawad station planning area. The method of determination rain intensity analysis can be done with three methods: Van Breen, Bell Tanimoto and Hasper der Weduwen. Selected method is based on the smallest deviation value. Determination deviation value is determined by comparing rain intensity value of Van Breen method, Bell Tanimoto, Hasper der Weduwen. By comparing rain intensity value of the Van Breen method, Bell Tanimoto, Hasper der Weduwen with the results of calculating three methods through the method approach Talbot, Sherman and Ishiguro. Calculation results show that the method of rain has smallest deviation standard is method Van Breen with Talbot approach for rainy period (PUH) 2, 5, 10, 25, 50 and 100 years.</p>


2019 ◽  
Vol 1 (1) ◽  
pp. 33
Author(s):  
M Welly

Many people in Indonesia calculate design rainfall before calculating the design flooddischarge. The design rainfall with a certain return period will eventually be convertedinto a design flood discharge by combining it with the characteristics of the watershed.However, the lack of a network of rainfall recording stations makes many areas that arenot hydrologically measured (ungauged basin), so it is quite difficult to know thecharacteristics of rain in the area concerned. This study aims to analyze thecharacteristics of design rainfall in Lampung Province. The focus of the analysis is toinvestigate whether geographical factors influence the design rainfall that occurs in theparticular area. The data used in this study is daily rainfall data from 15 rainfallrecording stations spread in Lampung Province. The method of frequency analysis usedin this study is the Gumbel method. The research shows that the geographical location ofan area does not have significant effect on extreme rainfall events. The effect of risingearth temperatures due to natural exploitation by humans tends to be stronger as a causeof extreme events such as extreme rainfall.Keywords: Influence, geographical, factors, extreme, rainfall.


Author(s):  
Indah Pratiwi ◽  
Yanti Sri Rezeki

This research aims to design workbook based on the scientific approach for teaching writing descriptive text. This research was conducted on the seventh-grade students of SMPN 24 Pontianak. The method of this research is ADDIE (Analysis, Design, Development, Implementation, and Evaluation) with the exclusion of Implementation and Evaluation phases. This material was designed as supplementary material to support the course book used especially in teaching writing of descriptive text. The respondents in this research were the seventh-grade students and an English teacher at SMPN 24 Pontianak. In this research, the researchers found that workbook based on scientific approach fulfilled the criteria of the good book to teach writing descriptive text. The researchers conducted an internal evaluation to see the usability and the feasibility of the workbook. The result of the evaluation is 89%. It showed that the workbook is feasible to be used by students as the supplementary material to support the main course book and help the students improve their writing ability in descriptive text.


2019 ◽  
Author(s):  
Oriol Planas ◽  
Feng Wang ◽  
Markus Leutzsch ◽  
Josep Cornella

The ability of bismuth to maneuver between different oxidation states in a catalytic redox cycle, mimicking the canonical organometallic steps associated to a transition metal, is an elusive and unprecedented approach in the field of homogeneous catalysis. Herein we present a catalytic protocol based on bismuth, a benign and sustainable main-group element, capable of performing every organometallic step in the context of oxidative fluorination of boron compounds; a territory reserved to transition metals. A rational ligand design featuring hypervalent coordination together with a mechanistic understanding of the fundamental steps, permitted a catalytic fluorination protocol based on a Bi(III)/Bi(V) redox couple, which represents a unique example where a main-group element is capable of outperforming its transition metal counterparts.<br>A main text and supplementary material have been attached as pdf files containing all the methodology, techniques and characterization of the compounds reported.<br>


Sign in / Sign up

Export Citation Format

Share Document