Distributional Assumptions in Food and Feed Commodities—Development of Fit-For-Purpose Sampling Protocols

2015 ◽  
Vol 98 (2) ◽  
pp. 295-300 ◽  
Author(s):  
Claudia Paoletti ◽  
Kim H. Esbensen
Author(s):  
Kapil Nichani ◽  
Steffen Uhlig ◽  
Manfred Stoyke ◽  
Sabine Kemmlein ◽  
Franz Ulberth ◽  
...  

Through its suggestive name, non-targeted methods (NTMs) do not aim at a predefined "needle in the haystack". Instead, they exploit all the constituents of the haystack. This new form of analytical methods is increasingly finding applications in food and feed testing. However, the concepts, terms, and considerations related to this burgeoning field of analytical testing needs to be propagated for the benefit of ones associated in academic research, commercial development, and official control. This paper addresses the frequently asked questions around notations and terminologies surrounding NTMs. The widespread development and adoption of these methods also necessitates the need to develop approaches to NTM validation, i.e., evaluating the performance characteristics of a method to determine if it is fit-for-purpose. This work aims to provide a roadmap to approaching NTM validation. In doing so, the paper deliberates on the different considerations that influence the approach to validation and provides suggestions thereof.


Toxins ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 271 ◽  
Author(s):  
Hannalien Meyer ◽  
Zanele Diana Skhosana ◽  
Mamsy Motlanthe ◽  
Wiana Louw ◽  
Egmont Rohwer

Mycotoxins occur worldwide in the major grains, and producers, traders and processors are all challenged to prevent serious health problems for consumers. The challenges originate with pre-harvest fungi infections in the grain fields, increased contamination during improper storage and, finally, the mycotoxin accumulation in commercial food and feed products. Little is known about the multi-mycotoxin occurrence in maize and wheat commercially produced in South Africa. This is the first comprehensive study that reports on the multi-mycotoxin occurrence in South African produced maize and wheat crops after harvest, over four production seasons, in all the production regions of the country. The study was made possible with the development of a fit-for-purpose, cost-effective LC-MS/MS multi-mycotoxin method, validated for 13 “regulated” mycotoxins. A low mycotoxin risk was found in South African produced wheat, with only deoxynivalenol (DON) in 12.5% of the 160 samples at levels well below the 2000 µg/kg South African (SA) regulatory level. It was concluded that aflatoxin B1 (AFB1) is seldom present in South African produced commercial maize. The concentrations, regional variation and seasonal trends of deoxynivalenol and fumonisins, the two most prevalent mycotoxins, and of zearalenone (ZON), are reported for white and yellow maize in all the production provinces, based on the analytical results of 1400 maize samples. A threefold to eightfold increase in deoxynivalenol mean concentrations in white maize was observed in the main production regions in the fourth season, with 8.9% samples above 2000 µg/kg. A strong correlation was found between higher deoxynivalenol concentrations and the presence of 15-acetyl-deoxynivalenol (15-ADON). The mean fumonisin concentrations were well below the 4000 µg/kg South African regulatory value. A possible shift in the incidence and severity of mycotoxigenic Fusarium spp. in the provinces must be investigated. The variations and trends highlight the importance of a continuous monitoring of multi-mycotoxins in South Africa along the grain value chain.


2021 ◽  
Author(s):  

The current testing environment for food and feed samples is complex and uses a wide variety of analytical technologies that range from chemical to PCR-based. Whilst these approaches can be deemed fit for purpose in terms of their final analytical result, they tend to be highly specialised and require considerable frontend processing to ensure that the target analyte can be reliably detected and quantified. These combined sample processing and analytical requirements typically impact on testing times and have associated cost implications that must be factored into routine testing and monitoring applications. MSI uses multiple discrete and informative wavelengths covering regions such as the UV and near infra-red spectrum to quickly determine surface colour, texture and possible chemical composition. Compared to traditional molecular biology approaches utilising DNA extraction followed by PCR-based analyses, MSI can simplify and reduce the time/costs associated with sample analysis. It is rapid and non-destructive.


Author(s):  
Kapil Nichani ◽  
Steffen Uhlig ◽  
Manfred Stoyke ◽  
Sabine Kemmlein ◽  
Franz Ulberth ◽  
...  

Through its suggestive name, non-targeted methods (NTMs) do not aim at a predefined "needle in the haystack". Instead, they exploit all the constituents of the haystack. This new form of analytical methods is increasingly finding applications in food and feed testing. However, the concepts, terms, and considerations related to this burgeoning field of analytical testing needs to be propagated for the benefit of ones associated in academic research, commercial development, and official control. This paper addresses the frequently asked questions around notations and terminologies surrounding NTMs. The widespread development and adoption of these methods also necessitates the need to develop approaches to NTM validation, i.e., evaluating the performance characteristics of a method to determine if it is fit-for-purpose. This work aims to provide a roadmap to approaching NTM validation. In doing so, the paper deliberates on the different considerations that influence the approach to validation and provides suggestions thereof.


2015 ◽  
Vol 8 (5) ◽  
pp. 641-651 ◽  
Author(s):  
T.C. de Rijk ◽  
H.P. van Egmond ◽  
H.J. van der Fels-Klerx ◽  
R. Herbes ◽  
M. de Nijs ◽  
...  

In March 2013 a large shipment of maize, intended for feed was subject of an alert in the Rapid Alert System for Food and Feed of the European Commission (EC) because the aflatoxin B1 (AFB1) level in the load exceeded the EC regulated maximum level of 20 μg/kg. Since the shipment had passed import controls and was already distributed (mainly to German farms), a massive recall followed. The aim of the current study was to investigate questions, raised by authorities and industry, related to the effectivity of EU sampling procedures, the influence of sample homogenisation procedures and sample storage conditions on the test results, and fungal identification as unexpected mycotoxins were identified during this study. The Netherlands Food and Consumer Product Safety Authority seized a shipload of maize in July 2013, suspected to be contaminated with AFB1. The shipload was sampled according to the 2009 and 2013 EC Sampling Regulations to compare the outcomes of both sampling protocols. Mycotoxin analysis of the incremental samples showed high mean levels of AFB1, aflatoxin G1 (AFG1), and ochratoxin A (OTA). Also an extreme inhomogeneous distribution of aflatoxins and OTA was proven. Analysis of samples homogenised according to the slurry method showed improved performance as compared to samples homogenised through dry homogenisation. Sampling and sample homogenisation according to the Regulation from 2013 showed a closer estimate of the ‘true’ AFB1 content as compared to sampling according to the Regulation from 2009. No influence of laboratory storage conditions on AFB1 concentration could be determined. Fungal identification revealed Aspergillus flavus as the main source of AFB1 in this shipment. Infrequent occurrence of Aspergillus parasiticus might have been the source of AFG1. The occurrence of sometimes large amounts of OTA could not be explained, however it was suggested that Aspergillus welwitschiae might have played a role.


Sign in / Sign up

Export Citation Format

Share Document