scholarly journals Stress Intensity Factor Determination for Three-Dimensional Crack Using the Displacement Discontinuity Method with Applications to Hydraulic Fracture Height Growth and Non- Planar Propagation Paths

10.5772/56308 ◽  
2013 ◽  
Author(s):  
Farrokh Sheibani ◽  
Jon Olso
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Hydraulic Fracture ◽  
Three Dimensional ◽  
Height Growth ◽  
Displacement Discontinuity ◽  
Displacement Discontinuity Method ◽  
Propagation Paths ◽  
Fracture Height

Stress Intensity Factor for Repaired Circumferential Cracks in Pipe With Bonded Composite Wrap

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
F. Benyahia ◽  
A. Albedah ◽  
B. Bachir Bouiadjra
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Fracture Criterion ◽  
Three Dimensional ◽  
Element Analysis ◽  
Composite Systems ◽  
Bonded Composite ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

The use of composite systems as a repair methodology in the pipeline industry has grown in recent years. In this study, the analysis of the behavior of circumferential through cracks in repaired pipe with bonded composite wrap subjected to internal pressure is performed using three-dimensional finite element analysis. The fracture criterion used in the analysis is the stress intensity factor (SIF). The obtained results show that the bonded composite repair reduces significantly the stress intensity factor at the tip of repaired cracks in the steel pipe, which can improve the residual lifespan of the pipe.

Analysis of Three-Dimensional Clamped Single Edge Notched Tension (SENT) Specimens

2018 ◽  
Author(s):  
Zheng Liu ◽  
Xu Chen ◽  
Xin Wang
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Crack Depth ◽  
Plate Thickness ◽  
Three Dimensional ◽  
Width Ratio ◽  
Element Analysis ◽  
Out Of Plane ◽  
T Stress

In the present paper, three-dimensional clamped SENT specimens, which is one of the most widely used low-constraint and less-conservative specimen, are analyzed by using a crack compliance analysis approach and extensive finite element analysis. Considering the test standard (BS8571) recommended specimen sizes, the daylight to width ratio, H/W, is 10.0, the relative crack depth, a/W, is varied by 0.2, 0.3, 0.4, 0.5 or 0.6 and the relative plate thickness, B/W, is chosen by 1.0, 2.0 or 4.0, respectively. Complete solutions of fracture mechanics parameters, including stress intensity factor (K), in-plane T-stress (T11) and out-of-plane T-stress (T33) are calculated, and the results obtained from above two methods have a good agreement. Moreover, the combination of the effects of a/W and B/W on the stress intensity factor K, T11 and T33 stress are thus illustrated.

Fracture Mechanics Analysis of a PWR Under PTS Using XFEM and Input From TRACE

2019 ◽  
Author(s):  
Diego F. Mora ◽  
Roman Mukin ◽  
Oriol Costa Garrido ◽  
Markus Niffenegger
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Fracture Mechanics ◽  
Intensity Factor ◽  
Boundary Conditions ◽  
Three Dimensional ◽  
Element Model ◽  
Integrity Assessment ◽  
Mechanics Analysis ◽  
Dynamic Cooling

Abstract In this paper, an integrity assessment of a reference Reactor Pressure Vessel (RPV) under Pressurized Thermal Shock (PTS) is performed. The assessment is based on a multi-step simulation scheme, which includes the thermo-hydraulic, thermo-mechanical and fracture mechanics analyses. The proposed strategy uses a three dimensional (3D) finite element model (FEM) of the RPV with the Abaqus code to solve the thermo-mechanical problem for the scenario of a Large-Break Loss-of-Coolant Accident (LBLOCA). In order to obtain the boundary conditions for the thermal analysis, the thermo-hydraulic results from a 3D RPV model developed in the system code TRACE are used. The fracture mechanics analysis is carried out on submodels defined on the areas of interest. Submodels containing cracks or flaws are also located in regions of the RPV where there might be a concentration of stresses during the PTS. The calculation of stress intensity factor (SIF) makes use of the eXtended FEM (XFEM) approach. The computed SIF of the postulated cracks at the inner surface of the RPV wall are compared with the ASME fracture toughness curve of the embrittled RPV material. For different transient scenarios, the boundary conditions were previously calculated with a computational fluid dynamics (CFD) model. However, cross-verification of the results has shown consistency of both CFD and TRACE models. Moreover, the use of the later is very convenient for the integrity analyses as it is clearly less computationally expensive than CFD. Therefore, it can be used to calculate different PTS scenarios including different break sizes and break locations. The main findings from fracture mechanics analyses of the RPV subjected to LBLOCA are summarized and compared. The presented results also allow us to study the influence of the dynamic cooling plume on the stress intensity factor in more detail than with the conventional one-dimensional method. However, the plumes calculated with both approaches are different. How much this difference affects the integrity assessment of the RPV is discussed in the paper.

Sign in / Sign up

Export Citation Format

Share Document