scholarly journals Forward Osmosis Membrane Technology in Wastewater Treatment

2021 ◽  
Author(s):  
Deniz Şahin

In recent times, membrane technology has proven to be a more favorable option in wastewater treatment processes. Membrane technologies are more advantageous than conventional technologies such as efficiency, space requirements, energy, quality of permeate, and technical skills requirements. The forward osmosis (FO) membrane process has been widely applied as one of the promising technologies in water and wastewater treatment. Forward osmosis uses the osmotic pressure difference induced by the solute concentration difference between the feed and draw solutions. The proces requires a semi-permeable membrane which has comparable rejection range in size of pollutants (1 nm and below). This chapter reviews the application of FO membrane process in wastewater treatment. It considers the advantages and the disadvantages of this process.

Membranes ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 305
Author(s):  
Xing Wu ◽  
Cher Hon Lau ◽  
Biplob Kumar Pramanik ◽  
Jianhua Zhang ◽  
Zongli Xie

The application of membrane technologies for wastewater treatment to recover water and nutrients from different types of wastewater can be an effective strategy to mitigate the water shortage and provide resource recovery for sustainable development of industrialisation and urbanisation. Forward osmosis (FO), driven by the osmotic pressure difference between solutions divided by a semi-permeable membrane, has been recognised as a potential energy-efficient filtration process with a low tendency for fouling and a strong ability to filtrate highly polluted wastewater. The application of FO for wastewater treatment has received significant attention in research and attracted technological effort in recent years. In this review, we review the state-of-the-art application of FO technology for sewage concentration and wastewater treatment both as an independent treatment process and in combination with other treatment processes. We also provide an outlook of the future prospects and recommendations for the improvement of membrane performance, fouling control and system optimisation from the perspectives of membrane materials, operating condition optimisation, draw solution selection, and multiple technologies combination.


Author(s):  
Kar Cherng Hon ◽  
Chun Yang ◽  
Seow Chay Low

In this paper, an innovative direct power generation technique from salinity gradient is proposed and demonstrated. The basis of this novel method encompasses forward osmosis (FO) and electrokinetic (EK) principles. Tapping the concentration difference between seawater and river fresh water, forward osmosis (FO) is utilized to allow for spontaneously transporting water across a semi-permeable membrane. The flow of water is then directed towards array of microchannels in the form of porous medium where power is produced from the electrokinetical streaming potential. Experimentally, NaCl solution and DI water were used to model as seawater and fresh river water, respectively. Both glass and polymer based porous media and commercial flat sheet FO membranes were employed herein. Results show power density could reach the order of 101W/m2. Having features of ease of fabrication, simple configuration and no mechanical moving parts, this method provides a feasible mean to harvest enormous energy from salinity gradient. Thus the proposed technique could contribute greatly to renewable energy and towards sustainable future.


2009 ◽  
Vol 3 (1) ◽  
pp. 8-16 ◽  
Author(s):  
Jian-Jun Qin ◽  
Boris Liberman ◽  
Kiran A. Kekre ◽  
Ado Gossan

Reverse osmosis (RO) has been widely applied in various water and wastewater treatment processes as a promising membrane technology. However, RO membrane fouling is a global issue, which limits it operating flux, decreases water production, increases power consumption and requires periodical membranes Cleaning-in-Place (CIP) procedure. This may result in low effectiveness, high cost and adds environmental issues related to the CIP solutions disposal. Forward osmosis (FO) or direct osmosis (DO) is the transport of water across a semi-permeable membrane from higher water chemical potential side to lower water chemical potential side, which phenomenon was observed in 1748. The engineered applications of FO/DO in membrane separation processes have been developed in food processing, wastewater treatment and seawater/brackish water desalination. In recent years, DO has been increasingly attractive for RO fouling control as it is highly efficient and environmentally friendly technique which is a new backwash technique via interval DO by intermittent injection of the high salinity solution without stoppage of high pressure pump or interruption of the operational process and allows keeping RO membrane continuously clean even in heavy bio-fouling conditions and operating RO membranes at high flux. This paper provides the state-of-the-art of the physical principles and applications of DO for RO fouling control as well as its strengths and limitations.


Author(s):  
Mamatha Hopanna ◽  
Kiranmayi Mangalgiri ◽  
Temitope Ibitoye ◽  
Daniel Ocasio ◽  
Sebastian Snowberger ◽  
...  

2004 ◽  
Vol 50 (12) ◽  
pp. 119-124 ◽  
Author(s):  
K.W. Chau

The fractal structure and particle size of flocs are generally recognized as the two most crucial physical properties having impact on the efficiency of operation of several unit processes in water and wastewater treatment. In this study, an experimental investigation is undertaken on the effect of aggregate structure in water and wastewater treatment in Hong Kong. The fractal dimension of the resulting aggregate is employed as a measure of the aggregate structure. Small angle light scattering technique is used here. Different amounts of polymers are mixed to bacterial suspensions and the resulting structures are examined. The addition of polymer may foster aggregate formation by neutralization of the bacterial surface charge and enhance inter-particle bridging. The aggregation behavior may affect the efficiency of certain water and wastewater treatment processes such as dewatering and coagulation. The impacts of aggregate structure on two representative processes, namely, ultra-filtration membrane fouling and pressure filter dewatering efficiency, are studied. It is found that the looser flocs yield a more porous cake and less tendency to foul whilst more porous filter cakes yield more ready biosolids dewatering.


Sign in / Sign up

Export Citation Format

Share Document