Evaluation for the Quality of Flake Graphite Cast Iron and Spheroidal Graphite Cast Iron by Tapping Test with Using Artificial Intelligence

The nanoscale functional thin film with the affinity to acrylic rubber was formed on the surface of a high ductile spheroidal-graphite cast iron by means of polymer plating of 6-diallylamino-1,3,5-triazine-2,4-dithiol monosodium salt. The direct joining of acrylic rubber to the cast iron was achieved with the functional nanofilm during curing. High peel strength adherend of the rubber/cast iron was obtained with suitable film thickness and good film quality under curing at 453 K for 18 min. When the film thickness was 8.53 nm, peel strength of the adherend was high to 4.9 kNm-1, and its broken-out section was rubber cohesive failure. The film thickness considerably affected peel strength and rubber coverage. Moreover, the current density of polymer plating had largely influence on mass and quality of thin film, thereby on joining property of acrylic rubber to the cast iron. The good joining property results from chemical bond within interfacial layer of acrylic rubber chain and reactive groups of nanofilm polymer-plated on the surface of cast iron.

Download Full-text

Evaluation on the Quality of Flake Graphite Cast Iron

Transactions of the Japan Institute of Metals ◽

10.2320/matertrans1960.7.181 ◽

1966 ◽

Vol 7 (3) ◽

pp. 181-185 ◽

Cited By ~ 1

Author(s):

Masao Homma ◽

Hiroshi Meguro

Keyword(s):

Cast Iron ◽

Flake Graphite ◽

Graphite Cast Iron ◽

Flake Graphite Cast Iron

Download Full-text

Judgment of Graphite Structure of Flake Graphite Cast Iron by Artificial Intelligence

Journal of Computer Chemistry Japan ◽

10.2477/jccj.2021-0017 ◽

2020 ◽

Vol 19 (4) ◽

pp. 167-168

Author(s):

Mizuki IKEHARA ◽

Nozomu UCHIDA ◽

Yuuki IWAMI ◽

Masaya KATO ◽

Toshitake KANNO

Keyword(s):

Artificial Intelligence ◽

Cast Iron ◽

Flake Graphite ◽

Graphite Cast Iron ◽

Flake Graphite Cast Iron ◽

Graphite Structure

Download Full-text

Specification for flake graphite cast iron

10.3403/00209030 ◽

1990 ◽

Keyword(s):

Cast Iron ◽

Flake Graphite ◽

Graphite Cast Iron ◽

Flake Graphite Cast Iron

Download Full-text

Color Etching for Characterization the Grain Orientation in Spheroidal Graphite Cast Iron

Materials Science Forum ◽

10.4028/www.scientific.net/msf.537-538.389 ◽

2007 ◽

Vol 537-538 ◽

pp. 389-396 ◽

Cited By ~ 2

Author(s):

Ibolya Kardos ◽

Zoltán Gácsi ◽

Péter János Szabó

Keyword(s):

Cast Iron ◽

Crystallographic Orientation ◽

Grain Orientation ◽

Test Material ◽

Spheroidal Graphite ◽

Metallic Materials ◽

Additional Information ◽

Spheroidal Graphite Cast Iron ◽

Graphite Cast Iron ◽

Back Scattering

Color etching is a widely used technique for visualizing different phases in metallic materials. Its advantage to the traditional etching techniques is that it gives additional information within one phase, namely, the color shade of a given phase can change in a certain range. This paper demonstrates that, due to the physics of the color etching, the shade of a phase also depends on the crystallographic orientation of the investigated grain. As a test material, spheroidal graphite cast iron was used, and individual grain orientation was identified by automated electron back scattering diffraction (EBSD). Results showed that there is a strong correlation between grain orientation and the shades obtained by color etching.

Download Full-text