Analysis of the light-extraction efficiency of SiC substrate-based flip-chip vertical light-emitting diodes with embedded photonic crystals

2016 ◽  
Vol 55 (11) ◽  
pp. 112101 ◽  
Author(s):  
Meng Liu ◽  
Kang Li ◽  
Fan-min Kong ◽  
Jia Zhao ◽  
Shu-long Zhao ◽  
...  
2021 ◽  
Vol 16 (4) ◽  
pp. 591-596
Author(s):  
Meng Liu ◽  
Xuan Zheng ◽  
Wenfei Liu ◽  
Juan Li ◽  
Wenjing Wang ◽  
...  

In the present study, embedded photonic crystals were introduced into the p-GaN contact layer of light-emitting diodes to increase the light-extraction efficiency of flip-chip deep-ultraviolet light-emitting diodes. As demonstrated by performing three-dimensional finite-difference time domain simulation, the embedded photonic crystals could be designed to increase the total reflectivity on the p-GaN contact layer, thereby increasing the light-extraction efficiency. In addition, the effects of the embedded photonic crystals configurations on the light-extraction efficiency of deep-ultraviolet light-emitting diodes were examined. Light-extraction efficiency over 21% for transverse magnetic polarized emission could be generally expected by rigorously optimizing the active layer position, as well as the depth, period, and filling factor of photonic crystals. Moreover, an investigation was conducted on the light-extraction efficiency over the whole ultraviolet spectrum, and more light-extraction efficiency harvest on a broadband ultraviolet spectrum has been achieved as compared with flip-chip planar deep-ultraviolet light-emitting diodes. The optimized structure will be promising for increasing the light-extraction efficiency of AlGaN-based flip-chip deep-ultraviolet light-emitting diodes.


Micromachines ◽  
2019 ◽  
Vol 10 (11) ◽  
pp. 767 ◽  
Author(s):  
Hong Wang ◽  
Ming Zhong ◽  
Lijun Tan ◽  
Wei Shi ◽  
Quanbin Zhou

In this study, the photonic crystal structure is employed to increase both the light extraction efficiency and the modulation bandwidth of flip-chip GaN-based light-emitting diodes (LEDs). The finite difference time domain method is utilized to investigate the influence of structure of photonic crystals on the Purcell factor and light extraction efficiency of flip-chip GaN-based LEDs. Simulation results show that the modulation bandwidth is estimated to be 202 MHz at current densities of 1000 A/cm2. The experimental result of modulation bandwidth is in accord with the simulation. The optical f-3dB of the device achieves 212 MHz at current densities of 1000 A/cm2 and up to 285 MHz at current densities of 2000 A/cm2. This design of photonic crystal flip-chip LED has the potential for applications in high-frequency visible light communication.


2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Wei Xu ◽  
Yang Li

The light extraction efficiency of organic light-emitting diodes (OLED) is greatly limited due to the difference in refractive indexes between materials of OLED. We fabricated OLED with photonic crystal microstructures in the interface between the glass substrate and the ITO anode. The light extraction efficiency can be improved by utilizing photonic crystals; however, the anisotropy effect of light extraction was clearly observed in experiment. To optimize the device performance, the effect of photonic crystal on both light extraction and angular distribution was investigated using finite-difference time domain (FDTD) method. We simulated the photonic crystals with the structure of square lattice and triangle lattice. We analyzed the improvement of these structures in the light extraction efficiency of the OLED and the influence of arrangement, depth, period, and diameter on anisotropy. The optimized geometric parameters were provided, which will provide the theoretical support for designing the high performance OLED.


Sign in / Sign up

Export Citation Format

Share Document