Study on the High Temperature Deformation of Incoloy 825 Alloy using an Artificial Neural Network

2018 ◽  
Vol 27 (1) ◽  
pp. 41-45
Author(s):  
Shin-Hyung Song ◽  
Yongbae Kim ◽  
Seoung-Yong Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
High Temperature ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Artificial Neural ◽  
Incoloy 825

scholarly journals A Comparative Study on Improved Arrhenius-Type and Artificial Neural Network Models to Predict High-Temperature Flow Behaviors in 20MnNiMo Alloy

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Guo-zheng Quan ◽  
Chun-tang Yu ◽  
Ying-ying Liu ◽  
Yu-feng Xia
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
High Temperature ◽  
Constitutive Model ◽  
Relative Error ◽  
Type Model ◽  
Ann Model ◽  
Data Set ◽  
Average Absolute Relative Error ◽  
Artificial Neural

The stress-strain data of 20MnNiMo alloy were collected from a series of hot compressions on Gleeble-1500 thermal-mechanical simulator in the temperature range of 1173∼1473 K and strain rate range of 0.01∼10 s−1. Based on the experimental data, the improved Arrhenius-type constitutive model and the artificial neural network (ANN) model were established to predict the high temperature flow stress of as-cast 20MnNiMo alloy. The accuracy and reliability of the improved Arrhenius-type model and the trained ANN model were further evaluated in terms of the correlation coefficient (R), the average absolute relative error (AARE), and the relative error (η). For the former,Rand AARE were found to be 0.9954 and 5.26%, respectively, while, for the latter, 0.9997 and 1.02%, respectively. The relative errors (η) of the improved Arrhenius-type model and the ANN model were, respectively, in the range of −39.99%∼35.05% and −3.77%∼16.74%. As for the former, only 16.3% of the test data set possessesη-values within±1%, while, as for the latter, more than 79% possesses. The results indicate that the ANN model presents a higher predictable ability than the improved Arrhenius-type constitutive model.

scholarly journals Modeling the Influence of the Composition of Refractory Elements on the Heat Resistance of Nickel Alloys by a Deep Learning Artificial Neural Network

2020 ◽  
Author(s):  
Dmitry TARASOV ◽  
Oleg Milder ◽  
Andrei Tiagunov
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Deep Learning ◽  
High Temperature ◽  
Nickel Alloys ◽  
Rupture Strength ◽  
Chemical Degradation ◽  
High Temperature Strength ◽  
Refractory Elements ◽  
Artificial Neural

Nickel alloys are widely used in the production of gas turbine parts. The alloys show resistance to mechanical and chemical degradation under severe long-term stress and high temperatures. One of the major mechanical properties of the alloys is the high-temperature rupture strength, which is measured after a specimen is heated to a certain temperature and held for a certain time considering deformation. Determining the influence of certain elements on the properties of an alloy is a complex scientific and engineering problem that affects the time and cost of developing new materials. Simulation is a great chance to cut costs. In this paper, we predict a high-temperature strength based on the composition of refractory elements in alloys using a deep learning artificial neural network. We build the model based on prior knowledge of the composition of the alloys, information on the role of alloying elements, type of crystallization, test temperature and time, and the tensile strength. Successful simulation results show the applicability of this method in practice.

Sign in / Sign up

Export Citation Format

Share Document