acetabular component
Recently Published Documents


TOTAL DOCUMENTS

782
(FIVE YEARS 140)

H-INDEX

59
(FIVE YEARS 5)

Author(s):  
Julien Wegrzyn ◽  
Alexander Antoniadis ◽  
Ehsan Sarshari ◽  
Matthieu Boubat ◽  
Alexandre Terrier

Abstract Purpose Concerns remain about potential increased wear with dual mobility cups related to the multiple articulations involved in this specific design of implant. This finite element analysis study aimed to compare polyethylene (PE) wear between dual mobility cup and conventional acetabular component, and between the use of conventional ultra-high molecular weight PE (UHMWPE) and highly cross-linked PE (XPLE). Methods Patient-specific finite element modeling was developed for 15 patients undergoing primary total hip arthroplasty (THA). Five acetabular components were 3D modeled and compared in THA constructs replicating existing implants: a dual mobility cup with a 22.2-mm-diameter femoral head against UHMWPE or XLPE (DM22PE or DM22XL), a conventional cup with a 22.2-mm-diameter femoral head against UHMWPE (SD22PE) and a conventional cup with a 32-mm-diameter femoral head against UHMWPE or XLPE (SD32PE or SD32XL). Results DM22PE produced 4.6 times and 5.1 times more volumetric wear than SD32XL and DM22XL (p < 0.0001, Cohen’s d = 6.97 and 7.11; respectively). However, even if significant, the differences in volumetric wear between DM22XL and SD32XL as well as between DM22PE and SD22PE or SD32PE were small according to their effect size (p < 0.0001, Cohen’s |d|= 0.48 to 0.65) and could be therefore considered as clinically negligible. Conclusion When using XLPE instead of UHMWPE, dual mobility cup with a 22.2-mm-diameter femoral head produced a similar amount of volumetric wear than conventional acetabular component with a 32-mm-diameter femoral head against XLPE. Therefore, XLPE is advocated in dual mobility cup to improve its wear performance.


2021 ◽  
pp. 112070002110569
Author(s):  
Nick D Clement ◽  
Reynard J Immelman ◽  
Deborah MacDonald ◽  
Steffen J Breusch ◽  
Colin R Howie

Aims: Primary aim was to determine survival of a cemented acetabular component with bulk roof autograft with a minimum of 12 years follow-up. The secondary aim was to determine the clinical outcome. Methods: A cohort of 62 consecutive patients (74 hips) undergoing cemented total hip arthroplasty with acetabular bulk roof autograft for acetabular dysplasia were retrospectively identified. The group consisted of 57 female patients (67 hips) and 5 male patients (7 hips) with a mean age at operation of 45 years. No patient was lost to follow-up, however 9 patients died had during the study period. The Oxford Hip Score (OHS), Forgotten Joint Score (FJS), EuroQol 5-Dimensional Score (EQ-5D), Short Form (SF-12) physical score and patient satisfaction were used to assess clinical outcome for patients with a surviving prosthesis. Results: The median follow-up was 16.6 (13.4–19.1) years. 6 revisions were performed during the follow-up period, all of which were due to aseptic loosening of the acetabular component. The all-cause Kaplan Meier survival rate for the acetabular component was 99% at 10 years, 95% at 15 years and 83% at 20 years. Neither age, gender, femoral osteotomy or polyethylene (UHMW vs. cross-linked) were significant predictors of aseptic revision of the acetabular component. There were no case of graft resorption and all grafts were radiologically incorporated. 45 patients were available for functional assessment at a mean follow-up of 18.2 years. The mean OHS was 37.8, FJS was 55.7, EQ5D was 0.73, and SF-12 physical component was 43.2. No patient was dissatisfied, with 2 patients reporting a neutral satisfaction, 7 stating they were satisfied and the remaining 36 were very satisfied. Conclusions: A cemented acetabular component with bulk roof autograft for dysplasia offers excellent survival with good to excellent functional outcome with high patient satisfaction in the medium- to long-term.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yukihide Minoda ◽  
Ryo Sugama ◽  
Yoichi Ohta ◽  
Susumu Takemura ◽  
Nobuo Yamamoto ◽  
...  

AbstractThe acetabular component orientation in total hip arthroplasty is of critical importance to clinical results. Although navigation systems and surgical robots have been introduced, most surgeons still use acetabular component alignment guides. This study aimed to compare the accuracy between modern acetabular component alignment guides for the lateral position and those for the supine position. Thirteen alignment guides for the lateral position and 10 for the supine position were investigated. All the lateral position alignment guides indicated cup alignment in operative definition, and the supine position alignment guides indicated cup alignment in radiographic definition. For lateral position alignment guides, the anteversion actually indicated by the alignment guide itself was smaller than that indicated by the manufacturer by a mean of 6° (maximum, 9°), and the inclination actually indicated by alignment guides themselves was larger than that by the manufacturer (p < 0.01) by a mean of 2° (maximum, 4°). For supine position alignment guides, the inclination and anteversion indicated by the alignment guide itself were identical with those indicated by the manufacturer. The current study showed that the angles actually indicated and those stated by manufacturers were not identical for lateral position alignment guides.


2021 ◽  
pp. 155633162110517
Author(s):  
Jobe Shatrov ◽  
Daniel Marsden-Jones ◽  
Matt Lyons ◽  
William L. Walter

Background: Incorrect acetabular component positioning in total hip arthroplasty (THA) has been associated with poor outcomes. Computer-assisted hip arthroplasty increases accuracy and consistency of cup positioning compared to conventional methods. Traditional navigation units have been associated with problems such as bulkiness of equipment and reproducibility of anatomical landmarks, particularly in obese patients or the lateral position. Purpose: We sought to evaluate the accuracy of a novel miniature inertial measurement system, the Navbit Sprint navigation device (Navbit, Sydney, Australia), to navigate acetabular component positioning in both the supine and lateral decubitus positions. We also aimed to validate a new method of patient registration that does not require acquisition of anatomical landmarks for navigation. Methods: We performed THA in a cadaveric study in supine and lateral positions using Navbit navigation to record cup position and compared mean scores from 3 Navbit devices for each cup position on post-implantation CT scans. Results: A total of 11 cups (5 supine and 6 lateral) were available for comparison. A difference of 2.34° in the supine direct anterior approach when assessing acetabular version was deemed to be statistically but not clinically significant. There was no statistically significant difference between CT and navigation measurements of cup position in the lateral position. Conclusion: This cadaveric study suggests that a novel inertial-based navigation tool is accurate for cup positioning in THA in the supine and lateral positions. Furthermore, it validates a novel registration method that does not require the identification of anatomical landmarks.


2021 ◽  
Vol 103-B (11) ◽  
pp. 1669-1677
Author(s):  
Hiren M. Divecha ◽  
Terence W. O'Neill ◽  
Mark Lunt ◽  
Tim N. Board

Aims To determine if primary cemented acetabular component geometry (long posterior wall (LPW), hooded, or offset reorientating) influences the risk of revision total hip arthroplasty (THA) for instability or loosening. Methods The National Joint Registry (NJR) dataset was analyzed for primary THAs performed between 2003 and 2017. A cohort of 224,874 cemented acetabular components were included. The effect of acetabular component geometry on the risk of revision for instability or for loosening was investigated using log-binomial regression adjusting for age, sex, American Society of Anesthesiologists grade, indication, side, institution type, operating surgeon grade, surgical approach, polyethylene crosslinking, and prosthetic head size. A competing risk survival analysis was performed with the competing risks being revision for other indications or death. Results The distribution of acetabular component geometries was: LPW 81.2%; hooded 18.7%; and offset reorientating 0.1%. There were 3,313 (1.5%) revision THAs performed, of which 815 (0.4%) were for instability and 838 (0.4%) were for loosening. Compared to the LPW group, the adjusted subhazard ratio of revision for instability in the hooded group was 2.31 (p < 0.001) and 4.12 (p = 0.047) in the offset reorientating group. Likewise, the subhazard ratio of revision for loosening was 2.65 (p < 0.001) in the hooded group and 13.61 (p < 0.001) in the offset reorientating group. A time-varying subhazard ratio of revision for instability (hooded vs LPW) was found, being greatest within the first three months. Conclusion This registry-based study confirms a significantly higher risk of revision after cemented THA for instability and for loosening when a hooded or offset reorientating acetabular component is used, compared to a LPW component. Further research is required to clarify if certain patients benefit from the use of hooded or offset reorientating components, but we recommend caution when using such components in routine clinical practice. Cite this article: Bone Joint J 2021;103-B(11):1669–1677.


2021 ◽  
Vol 103-B (10) ◽  
pp. 1604-1610
Author(s):  
Yusuke Takaoka ◽  
Koji Goto ◽  
Jiro Tamura ◽  
Yaichiro Okuzu ◽  
Toshiyuki Kawai ◽  
...  

Aims We aimed to evaluate the long-term outcome of highly cross-linked polyethylene (HXLPE) cemented acetabular components and assess whether any radiolucent lines (RLLs) which arose were progressive. Methods We retrospectively reviewed 170 patients who underwent 187 total hip arthroplasties at two hospitals with a minimum follow-up of ten years. All interventions were performed using the same combination of HXLPE cemented acetabular components with femoral stems made of titanium alloy. Kaplan-Meier survival analysis was performed for the primary endpoint of acetabular component revision surgery for any reason and secondary endpoint of the appearance of RLLs. RLLs that had appeared once were observed over time. We statistically assessed potential relationships between RLLs and a number of factors, including the technique of femoral head autografting and the Japanese Orthopaedic Association score. Results The mean follow-up period was 13.0 years (10.0 to 16.3). Femoral head autografting was performed on 135 hips (72.2%). One acetabular component was retrieved because of deep infection. No revision was performed for the aseptic acetabular loosening. The Kaplan-Meier survival curve for the primary and secondary endpoints were 98.2% (95% confidence interval (CI) 88.6% to 99.8%) and 79.3% (95% CI 72.8% to 84.6%), respectively. RLLs were detected in 38 hips (21.2%), at a mean of 1.7 years (1 month to 6 years) postoperatively. None of the RLLs were progressive, and the presence of RLLs did not show a significant association with the survival and clinical score. RLLs were more frequently observed in hips without femoral head autografts than in those with autografts. Conclusion The use of HXLPE cemented acetabular components in total hip arthroplasty demonstrated excellent clinical outcomes after ten years, and no RLLs were progressive, and their presence did not affect the outcome. Femoral head autografting did not negatively impact the acetabular component survival or the appearance of RLLs. Cite this article: Bone Joint J 2021;103-B(10):1604–1610.


Sign in / Sign up

Export Citation Format

Share Document