High-power thin-disk lasers emitting beams with axially-symmetric polarizations

We present the intracavity generation of beams with radial polarization at an average output power of 750 W and an optical efficiency of 43% from a continuous wave thin-disk laser. Circular grating waveguide output couplers (GWOC) were used to select the radial polarization. The sensitivity of the polarizing function of the GWOC with regards to the fabrication tolerances is also analysed in details with a particular emphasis on the effect of the duty cycle and the geometrical profile of the gratings. Furthermore, we present the conversion of femtosecond laser pulses from linear to azimuthal polarization using a nanograting-based polarization converter. Azimuthally polarized beams with an average power of up to 850 W, a pulse duration of 400 fs and a pulse repetition rate of 1 MHz were generated in this way with a conversion efficiency of >90%.

Numerical simulation of a plasmonic lens for laser light focusing

In this paper, the design of a plasmonic lens in gold and silver thin films for focusing the light with radial polarization is presented. Using the finite difference time domain method the optimal parameters of the plasmonic lens design are found. It was shown that the silver plasmonic lens produces a tight focal spot with a full width at half maximum of 0.38 of the incident light wavelength.

Design and Fabrication of a Holographic Radial Polarization Converter

Radial polarization converters can convert an incident light into a radially polarized light, which is beneficial in a variety of applications. In this paper, a new design of holographic radial polarization converter is proposed which consists of eight space-variant polarization-selective volume hologram gratings. According to the coupled wave theory, a feasible design of the polarization-selective volume hologram gratings was described. The prism-hologram-prism sandwiched recording method was adopted for the recording. The s- and p-polarization diffraction efficiencies of the fabricated polarization-selective volume hologram gratings at 443.29 nm are 90.83% and 22.09%, respectively. The operation bandwidth is about 4.42 nm. A prototype of holographic radial polarization converter was successfully assembled and tested. Due to the introduction of volume hologram gratings, this design should have the advantages of high diffraction efficiency, narrow band, compactness, and planar configuration, meaning it is especially suitable for low-cost mass production and has high application potential in related fields.