Measuring the Geometrical Parameters of Slub Yarn Using a Computer Vision Based Image Sequencing Technique

This article presents a computer vision method for measuring the geometrical parameters of slub yarn based on yarn sequence images captured from a moving slub yarn. An image segmentation method proposed by our earlier work was applied to segment sequence slub yarn images to obtain overlapping diameter data. Then an image stitching method was proposed to remove the overlapped data based on the normalised cross correlation (NCC) method. In order to detect the geometrical parameters of slub yarn, the frequency histogram , curve fitting, and spectrogram methods were adopted to analyse the sequence diameter data obtained. Four kinds of slub yarn with different geometrical parameters were tested using the method proposed and Uster method. The experimental results show that the detection results for slub amplitude, slub length, slub distance, and slub period obtained using the method proposed were consistent with the set values and Uster results.

Simplified Space Vector Pulse Width Modulation based on Switching Schemes with Reduced Switching Frequency and Harmonics for Five Level Cascaded H-Bridge Inverter

This paper presents a simplified control strategy of spacevector pulse width modulation technique with a three segment switching sequence and seven segment switching sequence for high power applications of multilevel inverters. In the proposed method, the inverter switching sequences are optimized for minimization of device switching frequency and improvement of harmonic spectrum by using the three most desired switching states and one suitable redundant state for each space vector. The proposed three-segment sequence is compared with conventional seven-segment sequence for five level Cascaded H-Bridge inverter with various values of switching frequencies including very low frequency. The output spectrum of the proposed sequence design shows the reduction of device switching frequency, current and line voltage THD, thereby minimizing the filter size requirement of the inverter, employed in industrial applications, where sinusoidal output voltage is required.