Vortex- and Wake-Induced Vibrations of a Circular Cylinder Placed in the Proximity of Two Fixed Cylinders

Purpose This study aims to understand the vibratory response of a circular cylinder placed in proximity to other fixed bodies. Methods A circular cylinder model was placed in a circulating water channel and was supported elastically to vibrate in the water. Another two circular cylinders were fixed upstream of the vibrating cylinder. The temporal displacement variations of the vibrating cylinder were measured and processed by a frequency analysis. Results When the inline spacings were small, two amplitude peaks appeared in the reduced velocity range 3.0–13.0. When the inline spacings were large, the amplitude response showed a single peak. Conclusion For small inline spacings, the first peak was attributed to high-amplitude vibrations forced by Karman vortex streets shed from the upstream cylinders. The second peak arose from interactions of the wakes of the upstream cylinder with the vibrating cylinder. When the inline spacing increased, the vortex-induced vibrations resembled those of an isolated cylinder.

Flow-Induced Vibrations of Single and Multiple Heated Circular Cylinders: A Review

This study is an effort to encapsulate the fundamentals and major findings in the area of fluid-solid interaction, particularly the flow-induced vibrations (FIV). Periodic flow separation and vortex shedding stretching downstream induce dynamic fluid forces on the bluff body and results in oscillatory motion of the body. The motion is generally referred to as flow-induced vibrations. FIV is a dynamic phenomenon as the motion, or the vibration of the body is subjected to the continuously changing fluid forces. Sometimes FIV is modeled as forced vibrations to mimic the vibration response due to the fluid forces. FIV is a deep concern of engineers for the design of modern heat exchangers, particularly the shell-and-tube type, as it is the major cause for the tube failures. Effect of important parameters such as Reynolds number, spacing ratio, damping coefficient, mass ratio and reduced velocity on the vibration characteristics (such as Strouhal number, vortex shedding, vibration frequency and amplitude, etc.) is summarized. Flow over a bluff body with wakes developed has been studied widely in the past decades. Several review articles are available in the literature on the area of vortex shedding and FIV. None of them, however, discusses the cases of FIV with heat transfer. In particular systems, FIV is often coupled to heat transfer, e.g., in nuclear power plants, FIV causes wear and tear to heat exchangers, which can eventually lead to catastrophic failure. As the circular shape is the most common shape for tubes and pipes encountered in practice, this review will only focus on the FIV of circular cylinders. In this attempt, FIV of single and multiple cylinders in staggered arrangement, including tandem and side-by-side arrangement is summarized for heated and unheated cylinder(s) in the one- and two-degree of freedom. The review also synthesizes the effect of fouling on heat transfer and flow characteristics. Finally, research prospects for heated circular cylinders are also stated.

Transient cooling of two circular cylinders arranged in Tandem an bounded by an adiabatic wall

Parametric study is carried out on the transient cooling process of two circular cylinders in tandem arrangement for a specified period of time. Transient analysis of conjugate (conduction and convection) heat dissipation from two identical cylinders is considered with various parameters. The two cylinders of same size and properties are bounded by an adiabatic flat wall from below and the cooling air is flowing normal to their axis (cross flow). The following parameters are investigated in the present study: Reynolds number, cylinders thermal properties, separation distance between the two cylinders and the cooling time. The laminar flow is considered with Reynolds number values from 50 to 500. The simulations are carried out for cooling the two cylinders made of carbon steels, plastics plexiglass and plywood. The local and average Nusselt number for both steady and transient cooling of the two cylinders are presented. The effects of the parameters are investigated and the results are presented to understand the process. It is found that increasing either the separation distance and/or the Reynolds number will increase the heat dissipation and reduce the cooling time. The results show that carbon steels cylinders need longer time of cooling compare with the plywood cylinders due to the difference in their thermal inertia.

Surface Roughness Effects on Flows Past Two Circular Cylinders in Tandem Arrangement at Co-Shedding Regime

This paper contributes by investigating surface roughness effects on temporal history of aerodynamic loads and vortex shedding frequency of two circular cylinders in tandem arrangement. The pair of cylinders is immovable; of equal outer diameter, D; and its geometry is defined by the dimensionless center-to-center pitch ratio, L/D. Thus, a distance of L/D = 4.5 is chosen to characterize the co-shedding regime, where the two shear layers of opposite signals, originated from each cylinder surface, interact generating counter-rotating vortical structures. A subcritical Reynolds number of Re = 6.5 × 104 is chosen for the test cases, which allows some comparisons with experimental results without roughness effects available in the literature. Two relative roughness heights are adopted, nominally ε/D = 0.001 and 0.007, aiming to capture the sensitivity of the applied numerical approach. Recent numerical results published in the literature have reported that the present two-dimensional model of surface roughness effects is able to capture both drag reduction and full cessation of vortex shedding for an immovable cylinder near a moving ground. That roughness model was successfully blended with a Lagrangian vortex method using sub-grid turbulence modeling. Overall, the effects of relative roughness heights on flows past two cylinders reveal changing of behavior of the vorticity dynamics, in which drag reduction, intermittence of vortex shedding, and wake destruction are identified under certain roughness effects. This kind of study is very useful for engineering conservative designs. The work is also motivated by scarcity of results previous discussing flows past cylinders in cross flow with surface roughness effects.