Early Applications of Viscosifying Friction Reducers for Hydraulic Fracturing Operations in the Vaca Muerta Formation, Argentina

Early hydraulic fracturing completions in the Vaca Muerta Formation in central Argentina have incorporated the use of conventional fluid systems, such as linear and crosslinked guar-based polymers. Within the past few years, however, the benefits of viscosifying friction reducers (VFR) have been demonstrated in the industry, predominantly within the United States. The objective of this project was to trial the VFR fluid technology in fracturing operations in this area for potential use for full field development. After studying the potential advantages of the VFR technology including cost savings, simplified operations and enhanced well production, a project was initiated to determine if those same benefits could be obtained. To accomplish this, studies were performed to ensure economic and technical justification through a stepwise process of laboratory testing, logistical and operational considerations, a single well field trial, and a five well development phase evaluation project. The pilot project was performed on a horizontal, 27 stage lateral in the Aguada Pichana Oeste field in the Neuquen Basin of Argentina. The five well development phase evaluation project was performed in the Lindero Atravesado field. Positive laboratory test results led to a field trial using this technology, during which several benefits of the VFR fluid system began to emerge. Operational efficiency was an early success, including a reduction in the quantity of chemicals on location, more simplified pumping schedules, and low pumping pressures. Secondly, significant cost savings were realized compared to previous fluid system packages. Finally, positive production results were observed, leading to the decision to incorporate this technology into full field development operations. This paper will review the results of the stepwise evaluation process along with a focus on the economic benefits and well production from the development phase evaluation project. This paper describes the transition by Pan American Energy (PAE) from conventional fracturing fluids to viscosifying friction reducer (VFR) technology in the Vaca Muerta Formation. The paper highlights the performance of a relatively new treatment fluid which delivered positive results in a strategic international asset. The project has led to full field development using this technology. The same efficiencies provided by this system can potentially be realized through applications in other basins.

Wellbore Shielding Technique Increases Operative Window, Avoiding Formation Instability and Losses, Minimizing NPT, and Optimizing Drilling Operations in the Unconventional Plays

Losses, wellbore instability, and influxes during drillings operations in unconventional fields result from continuous reactivity to the drilling fluid causing instability in the microfractured limestone of the Quintuco Formation in Argentina. This volatile situation becomes more critical when drilling operations are navigating horizontally through the Vaca Muerta Formation, a bituminous marlstone with a higher density than the Quintuco Formation. Controlling drilling fluids invasion between the communicating microfractures and connecting pores helps to minimize seepage losses, total losses, wellbore fluid influxes, and instabilities, reducing the non-productive time (NPT) caused by these problems during drilling operations. The use of conventional sealants – like calcium carbonate, graphite, asphalt, and other bridging materials – does not guarantee problem-free drilling operations. Also, lost circulation material (LCM) is restricted because the MWD-LWD tools clearances are very narrow in these slim holes. The challenge is to generate a strong and resistant seal separating the drilling fluid and the formation. Using an ultra-low-invasion technology will increase the operative fracture gradient window, avoid fluid invasion to the formation, minimize losses, and stop the cycle of fluid invasion and instability, allowing operations to maintain the designed drilling parameters and objectives safely. The ultra-low-invasion wellbore shielding technology has been applied in various fields, resulting in significantly improved drilling efficiencies compared to offset wells. The operator has benefited from the minimization of drilling fluids costs and optimization in drilling operations, including reducing the volume of oil-based drilling fluids used per well, fewer casing sections, and fewer requirements for cementing intervals to solve lost circulation problems. This paper will discuss the design of the ultra-low-invasion technology in an oil-based drilling fluid, the strategy for determining the technical limits for application, the evaluation of the operative window with an increase in the fracture gradient, the optimized drilling performance, and reduction in costs, including the elimination of NPT caused by wellbore instability.