Response analysis of hybrid functionally graded material plate subjected to thermo-electro-mechanical loading

Static and free vibration response analysis of a functionally graded piezoelectric material plate under thermal, electric, and mechanical loads is done in this study. The displacement field is acquired using the first-order shear deformation theory, and the Hamilton principle is applied to deduce the motion equations. Temperature-dependent material properties of the functionally graded material plate are used, and these properties follow the power-law distributions along the thickness direction. However, the properties of piezoelectric material layers are assumed to be independent of the electric field and temperature. Finite element formulation for the functionally graded piezoelectric material plate is done using the combined effect of mechanical and electrical loads. The effects of parameters like electrical loading, volume fraction exponent N, and temperature distribution on the static and free vibration characteristics of the functionally graded piezoelectric material square plate are analyzed and presented. Responses are obtained in terms of the centerline deflection, axial stress and the nondimensional natural frequency with various boundary conditions. It is observed that the centerline deflection and nondimensional natural frequency increases as exponent N increases. At the same time, the axial stress decreases with an increase in exponent N. The findings of the static and the free vibration analysis suggest the potential application of the functionally graded piezoelectric material plate in the piezoelectric actuator as well as for sensing deflection in bimorph.

Effect of interfacial imperfection on shear wave propagation in a piezoelectric composite structure: Wentzel–Kramers–Brillouin asymptotic approach

The primary objective of this article is to investigate the behaviour of horizontally polarized shear (SH) wave propagation in piezoelectric composite structure consisting of functionally graded piezoelectric material layer imperfectly bonded to functionally graded porous piezoelectric material half-space. The linear form of functional gradedness varying continuously along with depth is considered in both functionally graded piezoelectric material layer and functionally graded porous piezoelectric material half-space. The interface of the composite structure is considered to be damaged mechanically and/or electrically. Wentzel–Kramers–Brillouin asymptotic approach is adopted to solve the coupled electromechanical field differential equations of both functionally graded piezoelectric material layer and functionally graded porous piezoelectric material half-space. An analytical treatment has been employed to determine the dispersion relations of propagating SH-wave for both electrically short and electrically open conditions, which further reduced to the pre-established and classical results as special case of the problem. The effect of various affecting parameters, namely, functional gradedness, wave number, mechanical/electrical imperfection parameters in the presence and absence of porosity on the phase velocity of SH-wave, has been reported through numerical computation and graphical demonstration. In addition, the variation of the coupled electromechanical factor with dimensionless wave number and cut-off frequency with different modes of propagation of wave for electrically short and electrically open cases has also been discussed.