National primary standard for the unit of average laser radiation power GET 28-2016

The description of the National primary standard for the unit of average laser radiation power GET 28-2016 with a power range from 10–9 to 5·10–3 W is described. The principle of operation of a standard based on a photoelectric trap detector in the range from 10–9 to 5·10–3 W is described. As a result of metrological studies at National primary standard, it was determined that the value of the total standard uncertainty of reproduction and transmission of an average power unit for the range from 10–9 to 5·10–3 W is no more than 0.36 %. The model and theoretical characteristics of the measuring beam splitter, allowing to expand the range of the National primary standard to the range of kilowatt power levels, are presented. National primary standard allows solving the problems of metrological support of promising low-level laser ranging systems both in the ground and in the aerospace field, ensuring the uniformity of measurements of radiometric parameters of low-intensity laser radiation fluxes.

Metrological researches of national primary standard machine for Leeb hardness scales

The paper describes the study of metrological characteristics of the National primary standard machine for Leeb hardness scales. The data on the contribution of various values to the extended uncertainty of hardness measurements are presented.

National primary standard machine of Shore D hardness scale for metals and Leeb hardness scales

The article presents the results of studies to improve the National primary standard machine for hardness of metals on the shore D scale GET 161-2001, which were performed in FSUE “VNIIFTRI” from 2016 to 2018 in accordance with the technical task of Rosstandart.The improvement was carried out in order to ensure the uniformity of hardness measurements on the Leeb scales. The created new parts of the primary standard machine, which are settings for reproducing hardness numbers on the Leeb scales, are considered. Metrological characteristics of the upgraded and adopted National primary standard machine (GET 161-2019) were investigated, the budget of measurement uncertainty was calculated for reproducing hardness numbers on the Leeb scales.