Investigations of Evaporative Cooling and Turbulence Flame Interaction Modeling in Ethanol Turbulent Spray Combustion Using Tabulated Chemistry

Evaporative cooling effects and turbulence flame interaction are analyzed in the large eddy simulation (LES) context for an ethanol turbulent spray flame. Investigations are conducted with the artificially thickened flame (ATF) approach coupled with an extension of the mixture adaptive thickening procedure to account for variations of enthalpy. Droplets are tracked in a Euler–Lagrangian framework, in which an evaporation model accounting for the inter-phase non-equilibrium is applied. The chemistry is tabulated following the flamelet generated manifold (FGM) method. Enthalpy variations are incorporated in the resulting FGM database in a universal fashion, which is not limited to the heat losses caused by evaporative cooling effects. The relevance of the evaporative cooling is evaluated with a typically applied setting for a flame surface wrinkling model. Using one of the resulting cases from the evaporative cooling analysis as a reference, the importance of the flame wrinkling modeling is studied. Besides its novelty, the completeness of the proposed modeling strategy allows a significant contribution to the understanding of the most relevant phenomena for the turbulent spray combustion modeling.

Turbulent Spray Combustion Modeling Using Various Kinetic Solvers and Turbulence Models

Turbulent spray combustion of n-dodecane was modeled at relevant engine conditions using two combustion models (direct integration of chemistry (DIC) and flamelet generated manifolds (FGM)) and multifidelity turbulence models (dynamic structure large eddy simulation (LES) and renormalization group (RNG) Reynolds-averaged Naiver–Stokes (RANS)). The main objective of this work is to study the effect of various combustion and turbulence models on spray behavior and quantify these effects. To reach these objectives, a recently developed kinetic mechanism and well-established spray models were utilized for the three-dimensional turbulent spray simulation at various combustion chamber initial gas temperature and pressure conditions. Fine mesh with a size of 31 μm was utilized to resolve small eddies in the periphery of the spray. In addition, a new methodology for mesh generation was proposed and investigated to simulate the measured data fluctuation in the CFD domain. The pressure-based ignition delay, flame lift-off length (LOL), species concentrations, spray, and jet penetrations were modeled and compared with measured data. Differences were observed between various combustion and turbulence models in predicting the spray characteristics. However, these differences are within the uncertainties, error, and variations of the measured data.