hybrid renewable energy system
Recently Published Documents


TOTAL DOCUMENTS

568
(FIVE YEARS 311)

H-INDEX

31
(FIVE YEARS 12)

2022 ◽  
Vol 12 (2) ◽  
pp. 888
Author(s):  
Mohamed Ghorab ◽  
Libing Yang ◽  
Evgueniy Entchev ◽  
Euy-Joon Lee ◽  
Eun-Chul Kang ◽  
...  

Hybrid renewable energy systems are subject to extensive research around the world and different designs have found their way to the market and have been commercialized. These systems usually employ multiple components, both renewable and conventional, combined in a way to increase the system’s overall efficiency and resilience and to lower GHG emissions. In this paper, a hybrid renewable energy system was designed for residential use and its annual energy performance was investigated and optimized. The multi-module hybrid system consists of a Ground-Air Heat Exchanger (GAHX), Photovoltaic Thermal (PVT) panels and Air to Water Heat Pump (AWHP). The developed system’s annual performance was simulated in the TRaNsient SYStem (TRNSYS) environment and optimized using the General Algebraic Modelling System (GAMS) platform. Multi-objective non-linear optimization algorithms were developed and applied to define optimal system design and performance parameters while reducing cost and GHG emissions. The results revealed that the designed system was able to satisfy building thermal heating/cooling loads throughout the year. The ground source heat exchanger contributed 21.3% and 26.3% of the energy during heating and cooling seasons, respectively. The initial design was optimized in terms of key performance parameters and module sizes. The annual simulation analysis showed that the system was able to self-generate and meet nearly 29.4% of the total HVAC electricity needs, with the rest being supplied by the grid. The annual system module performance efficiencies were 13.4% for the PVT electric and 5.5% for the PVT thermal, with an AWHP COP of 4.0.


Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 5
Author(s):  
Zafar A. Khan ◽  
Muhammad Imran ◽  
Abdullah Altamimi ◽  
Ogheneruona E. Diemuodeke ◽  
Amged Osman Abdelatif

In addition to zero-carbon generation, the plummeting cost of renewable energy sources (RES) is enabling the increased use of distributed-generation sources. Although the RES appear to be a cheaper source of energy, without the appropriate design of the RES with a true understanding of the nature of the load, they can be an unreliable and expensive source of energy. Limited research has been aimed at designing small-scale hybrid energy systems for irrigation pumping systems, and these studies did not quantify the water requirement, or in turn the energy required to supply the irrigation water. This paper provides a comprehensive feasibility analysis of an off-grid hybrid renewable energy system for the design of a water-pumping system for irrigation applications in Sudan. A systematic and holistic framework combined with a techno-economic optimization analysis for the planning and design of hybrid renewable energy systems for small-scale irrigation water-pumping systems is presented. Different hybridization cases of solar photovoltaic, wind turbine and battery storage at 12 different sites in Sudan are simulated, evaluated, and compared, considering the crop water requirement for different crops, the borehole depth, and the stochasticity of renewable energy resources. Soil, weather, and climatic data from 12 different sites in Sudan were used for the case studies, with the key aim to find the most robust and reliable solution with the lowest system cost. The results of the case studies suggest that the selection of the system is highly dependent on the cost, the volatility of the wind speed, solar radiation, and the size of the system; at present, hybridization is not the primary option at most of sites, with the exception of two. However, with the reduction in price of wind technology, the possibility of hybrid generation will rise.


2021 ◽  
Vol 32 (4) ◽  
pp. 11-27
Author(s):  
Farzad Ghayoor ◽  
Andrew Swanson ◽  
Hudson Sibanda

Many countries, including South Africa, have introduced policies and incentives to increase their renewable energy capacities in order to address environmental concerns and reduce pollutant emissions into the atmosphere. In addition, consumers in South Africa have faced the ever-increasing price of electricity and unreliability of the grid since 2007 due to the lack of sufficient electricity production. As a result, employing hybrid renewable energy systems (HRESs) have gained popularity. This research focuses on grid-connected HRESs based on solar photovoltaic (PV) panels and wind turbines as a potential way of reducing the dependency of residential sector consumers on the grid. It aims to identify the optimal sizing of renewable energy sources to be cost-effective for consumers over a certain period of time, using Durban as a case study. Two artificial intelligence methods have been used to obtain the optimal sizing for the available PV panels, wind turbines and inverters. The results shown that the combination of PV panels and battery storage can be a profitable option. A system using higher rated power PV panels can start to become profitable in a shorter lifetime, but employing batteries can only be cost-effective if a long enough lifetime is considered.


Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8154
Author(s):  
Muhammad Shahbaz Aziz ◽  
Muhammad Adil Khan ◽  
Harun Jamil ◽  
Faisal Jamil ◽  
Alexander Chursin ◽  
...  

Pakistan receives Direct Normal Irradiation (DNI) exceeding 2000 kWh/m²/annum on approximately 83% of its land, which is very suitable for photovoltaic production. This energy can be easily utilized in conjunction with other renewable energy resources to meet the energy demands and reduce the carbon footprint of the country. In this research, a hybrid renewable energy solution based on a nearly Zero Energy Building (nZEB) model is proposed for a university facility. The building in consideration has a continuous flow of water through its water delivery vertical pipelines. A horizontal-axis spherical helical turbine is designed in SolidWorks and is analyzed through a computational fluid dynamics (CFD) analysis in ANSYS Fluent 18.1 based on the K-epsilon turbulent model. Results obtained from ANSYS Fluent have shown that a 24 feet vertical channel with a water flow of 0.2309 m3/s and velocity of 12.66 m/s can run the designed hydroelectric turbine, delivering 168 W of mechanical power at 250 r.p.m. Based on the turbine, a hybrid renewable energy system (HRES) comprising photovoltaic and hydroelectric power is modelled and analyzed in HOMER Pro software. Among different architectures, it was found that architecture with hydroelectric and photovoltaic energy provided the best COE of $0.09418.


Sign in / Sign up

Export Citation Format

Share Document