Electrochemical Deposition of ZnS Films from Electrolyte Based on Na2SO3

The paper considers the features of electrochemical growth of zinc sulfide from an aqueous electrolyte based on sodium sulfite and zinc sulfate. The conditions for the electrochemical production of ZnS films are determined. It is shown that the value of the potential at which a ZnS layer is formed is limited by the achievement of the critical current due to the diffusion limitations of the electrochemical process of reducing the sulfite ion. It is shown that the resulting films contain an excess of sulfur, which is removed, and the stoichiometric composition is obtained by heat treatment. Aed mechanism of reactions resulting in the formation of zinc sulfide is proposed.

Influence of Solvents on Properties of ZnS Thin Films Synthesized by Chemical Spray Pyrolysis Technique

In this paper, the influence of solvents on the structural, optical, surface and electrical properties of spray-deposited ZnS thin films has been studied. Different precursor mixtures were prepared from ethylene glycol, deionized water and alcohol solvents and sprayed on heated glasses via a simple and cost-effective technique known as spray pyrolysis. XRD patterns confirmed cubic and tetragonal phases of synthesized ZnS material. The optical analysis of the synthesized ZnS films showed that films prepared using ethylene glycol solvent have the highest transmittance and the best bandgap (3.61 eV). Surface morphology showed the absence of voids and pinholes in the Scanning Electron Micrograph of ZnS film prepared from ethylene glycol and electrical studies showed that ZnS films prepared using the same solvent have the lowest resistivity. Keywords: ZnS, Thin film, Spray pyrolysis, Bandgap, Morphology.