Abstract
Numerous studies are being conducted on solar desalination systems with creating new designs to improve the efficiency and yield of these systems. Hemispherical solar still has a relatively large throughput because of its large exposure and evaporation surface areas compared to the other distiller designs. To get the optimal conditions of the parameters that provide the highest productivity of the hemispherical still, three hemispherical basin stills were fabricated and tested. The experiments were performed in three stages: In the first one, the traditional hemispherical solar still THSS (a reference distiller) was compared by THSS with internal reflective mirrors (THSS-IRM). In the second stage, the effect of using different basin metals (THSS with basin metal of zinc (THSS-IRMZ) and basin metal of copper (THSS-IRMC)) with internal reflective mirrors was studied. In the third stage, the two distillers were investigated under using energy storage medium (30 g/L sand grains for each). The THSS with internal reflective mirrors, basin metal of zinc, and energy storage medium is abbreviated by THSS-IRMZSG. Also, THSS with internal reflective mirrors, basin metal of copper, and energy storage medium is abbreviated by THSS-IRMCSG. Moreover, THSS with internal reflective mirrors and energy storage medium is abbreviated by THSS-IRMSG. The results showed that the combination of using internal reflective mirrors, basin material (copper) and energy storage medium provided the best improvement of hemispherical distillation device. The maximum cumulative yield of THSS-IRMCSG was 11.9 L/m².day, while the reference distillation device gave a total yield of 4.65 L/m².day. So, the productivity was improved by around 156%.
Solar district heating with solar desalination using energy storage material for domestic hot water and drinking water – Environmental and economic analysis
