The Iron Oxides Strike Back: From Biomedical Applications to Energy Storage Devices and Photoelectrochemical Water Splitting

2011 ◽  
Vol 23 (44) ◽  
pp. 5243-5249 ◽  
Author(s):  
Pedro Tartaj ◽  
Maria P. Morales ◽  
Teresita Gonzalez-Carreño ◽  
Sabino Veintemillas-Verdaguer ◽  
Carlos J. Serna
ChemInform ◽  
2011 ◽  
Vol 43 (4) ◽  
pp. no-no
Author(s):  
Pedro Tartaj ◽  
Maria P. Morales ◽  
Teresita Gonzalez-Carreno ◽  
Sabino Veintemillas-Verdaguer ◽  
Carlos J. Serna

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Jingyan Zhang ◽  
Xiaowan Bai ◽  
Tongtong Wang ◽  
Wen Xiao ◽  
Pinxian Xi ◽  
...  

Abstract The development of efficient earth-abundant electrocatalysts for oxygen reduction, oxygen evolution, and hydrogen evolution reactions (ORR, OER, and HER) is important for future energy conversion and energy storage devices, for which both rechargeable Zn–air batteries and water splitting have raised great expectations. Herein, we report a single-phase bimetallic nickel cobalt sulfide ((Ni,Co)S2) as an efficient electrocatalyst for both OER and ORR. Owing to the synergistic combination of Ni and Co, the (Ni,Co)S2 exhibits superior electrocatalytic performance for ORR, OER, and HER in an alkaline electrolyte, and the first principle calculation results indicate that the reaction of an adsorbed O atom with a H2O molecule to form a *OOH is the potential limiting step in the OER. Importantly, it could be utilized as an advanced air electrode material in Zn–air batteries, which shows an enhanced charge–discharge performance (charging voltage of 1.71 V and discharge voltage of 1.26 V at 2 mA cm−2), large specific capacity (842 mAh gZn−1 at 5 mA cm−2), and excellent cycling stability (480 h). Interestingly, the (Ni,Co)S2-based Zn–air battery can efficiently power an electrochemical water-splitting unit with (Ni,Co)S2 serving as both the electrodes. This reveals that the prepared (Ni,Co)S2 has promising applications in future energy conversion and energy storage devices.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Linfeng Lv ◽  
Mengdi Peng ◽  
Leixin Wu ◽  
Yixiao Dong ◽  
Gongchuan You ◽  
...  

AbstractThe demand for green and efficient energy storage devices in daily life is constantly rising, which is caused by the global environment and energy problems. Lithium-ion batteries (LIBs), an important kind of energy storage devices, are attracting much attention. Graphite is used as LIBs anode, however, its theoretical capacity is low, so it is necessary to develop LIBs anode with higher capacity. Application strategies and research progresses of novel iron oxides and their composites as LIBs anode in recent years are summarized in this review. Herein we enumerate several typical synthesis methods to obtain a variety of iron oxides based nanostructures, such as gas phase deposition, co-precipitation, electrochemical method, etc. For characterization of the iron oxides based nanostructures, especially the in-situ X-ray diffraction and 57Fe Mössbauer spectroscopy are elaborated. Furthermore, the electrochemical applications of iron oxides based nanostructures and their composites are discussed and summarized.Graphic Abstract


2020 ◽  
Vol 13 (10) ◽  
pp. 3527-3535 ◽  
Author(s):  
Nana Chang ◽  
Tianyu Li ◽  
Rui Li ◽  
Shengnan Wang ◽  
Yanbin Yin ◽  
...  

A frigostable aqueous hybrid electrolyte enabled by the solvation interaction of Zn2+–EG is proposed for low-temperature zinc-based energy storage devices.


2020 ◽  
Author(s):  
Yamin Zhang ◽  
Zhongpu Wang ◽  
Deping Li ◽  
Qing Sun ◽  
Kangrong Lai ◽  
...  

<p></p><p>Porous carbon has attracted extensive attentions as the electrode material for various energy storage devices considering its advantages like high theoretical capacitance/capacity, high conductivity, low cost and earth abundant inherence. However, there still exists some disadvantages limiting its further applications, such as the tedious fabrication process, limited metal-ion transport kinetics and undesired structure deformation at harsh electrochemical conditions. Herein, we report a facile strategy, with calcium gluconate firstly reported as the carbon source, to fabricate ultrathin porous carbon nanosheets. <a>The as-prepared Ca-900 electrode delivers excellent K-ion storage performance including high reversible capacity (430.7 mAh g<sup>-1</sup>), superior rate capability (154.8 mAh g<sup>-1</sup> at an ultrahigh current density of 5.0 A g<sup>-1</sup>) and ultra-stable long-term cycling stability (a high capacity retention ratio of ~81.2% after 4000 cycles at 1.0 A g<sup>-1</sup>). </a>Similarly, when being applied in Zn-ion capacitors, the Ca-900 electrode also exhibits an ultra-stable cycling performance with ~90.9% capacity retention after 4000 cycles at 1.0 A g<sup>-1</sup>, illuminating the applicable potentials. Moreover, the origin of the fast and smooth metal-ion storage is also revealed by carefully designed consecutive CV measurements. Overall, considering the facile preparation strategy, unique structure, application flexibility and in-depth mechanism investigations, this work will deepen the fundamental understandings and boost the commercialization of high-efficient energy storage devices like potassium-ion/sodium-ion batteries, zinc-ion batteries/capacitors and aluminum-ion batteries.</p><br><p></p>


Author(s):  
Dhanasekar Kesavan ◽  
Vimal Kumar Mariappan ◽  
Karthikeyan Krishnamoorthy ◽  
Sang-Jae Kim

In this study, we report a facile carbothermal method for the preparation of boron-oxy-carbide (BOC) nanostructures and explore their properties towards electrochemical energy storage devices.


Author(s):  
Manika Chaudhary ◽  
Shrestha Tyagi ◽  
Ram K. Gupta ◽  
Beer Pal Singh ◽  
Rahul Singhal

Sign in / Sign up

Export Citation Format

Share Document