Comparison of mechanical and optical properties of a newly marketed universal composite resin with contemporary universal composite resins: An in vitro study

2021 ◽  
Author(s):  
Sevil Gurgan ◽  
Uzay Koc Vural ◽  
Ivana Miletic
Keyword(s):  
Optical Properties ◽  
Composite Resin ◽  
In Vitro Study ◽  
Composite Resins ◽  
Vitro Study

scholarly journals Color Stability of Bulk Fill Composite Resins Submitted to Coffee Staining

2020 ◽  
Vol 24 (1) ◽  
Author(s):  
Beatriz Maria Arruda ◽  
Julio Cesar Bassi ◽  
Rafael Pino Vitti ◽  
Renata Siqueira Scatolin
Keyword(s):  
Analysis Of Variance ◽  
Composite Resin ◽  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Composite Resins ◽  
Vitro Study ◽  
Change Analysis ◽  
Cie Lab

 Objective: The aim of this in vitro study was to evaluate the color stability of different bulk fill composite resins after extrinsic staining with coffee. Material and methods: Forty-eight disk-shaped specimens (6 mm diameter x 2 mm thick) of each composite resin were prepared for color change test. The composite resins were divided into 4 groups (n=12): one conventional composite resin (Filtek Z250) and three bulk-fill composite resins (Filtek Bulk Fill, Aura Bulk Fill, and Opus Bulk Fill). The samples were stained with 20 mL coffee solution for 7 days, with the solution being replaced every 24 h. The color change analysis was performed using a spectrophotometer, according to the CIE Lab formula. Data were analyzed using the Analysis of variance (ANOVA) and Tukey HSD tests (?=0.05). Results: The results revealed significant differences in color change among the composite resins tested (?<0.0001). The Aura Bulk Fill and Opus Bulk Fill showed the highest color change values. Conclusions: Thus, all the resins analyzed were susceptible to extrinsic staining with coffee, and the Filtek Bulk Fill showed the lowest color change value.

scholarly journals Marginal leakage of polyacid-modified composite resin restorations in primary molars: an in vitro study

2005 ◽  
Vol 13 (2) ◽  
pp. 110-113 ◽  
Author(s):  
Cleide Cristina R. Martinhon ◽  
Ricardo Sousa Vieira
Keyword(s):  
Composite Resin ◽  
In Vitro Study ◽  
Adhesive System ◽  
Composite Resins ◽  
Vitro Study ◽  
Primary Molars ◽  
Second Primary ◽  
Adhesive Layers ◽  
Gingival Margin

The purpose of this in vitro study was to compare the marginal leakage in primary molars restored with 2 polyacid-modified composite resins (Dyract AP - Dentsply and F2000 - 3M) and a composite resin (Filtek Z250 - 3M) as control. First and second primary molars were used for preparation of cavities on the proximal surfaces, with extension of the gingival margin to the cementoenamel junction. Restorations were accomplished after total etching and application of the respective adhesive system, and were divided into groups according to the restorative system and the number of adhesive layers used. The teeth were stored in distilled water for 7 days, followed by thermocycling with 500 cycles at 5ºC - 55ºC, with one minute in each bath. Thereafter, teeth were prepared for immersion in 0.5% methylene blue solution for four hours. The teeth were sectioned in mesiodistal direction for assessment of dye penetration. According to the results of the Kruskal-Wallis test, the three restorative materials employed did not completely avoid marginal leakage at the gingival margin of primary molars. The marginal leakage of PMCR F2000 (4.06 and 3.95) displayed to be higher than the marginal leakage observed for the materials Dyract AP (2.7 and 2.55) and Filtek Z250 (2.25 and 2.43). The number of adhesive layers did not influence the degree of leakage of the three materials.

Interactions Between Dental Composite Resins and Saliva A comparative biochemical in vitro study

2019 ◽  
Vol 56 (3) ◽  
pp. 529-533
Author(s):  
Mihaela Pantea ◽  
Diana Andreea Ighigeanu ◽  
Alexandra Totan ◽  
Maria Greabu ◽  
Daniela Miricescu ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
In Vitro Study ◽  
Composite Resins ◽  
Vitro Study ◽  
Dental Composite ◽  
Gamma Glutamyl Transferase ◽  
Specific Protocol ◽  
Dental Composite Resins ◽  
Glutamyl Transferase

This in vitro study analyses the biochemical interaction between saliva and three types of dental composite resins (a direct resin, an indirect resin and a dual-cure resin used for cementation of indirect dental restorations). The resin samples were obtained following a specific protocol and in line with the producers� recommendations; the resin samples were incubated with saliva samples collected from 19 healthy volunteers. The obtained results showed that the tested composite resins did not produce significant changes in oxidative stress parameters that were analysed (albumin, uric acid, GGT / gamma glutamyl transferase, OXSR-1 / oxidative stress responsive kinase 1) and do not influence the inflammatory salivary status reflected by the levels of IL-6 - an inflammatory marker.

EFFECT OF PREHEATING ON MICROLEAKAGE AND MICROHARDNESS OF COMPOSITE RESIN (AN IN VITRO STUDY)

2016 ◽  
Vol 41 (1) ◽  
pp. 4-11
Author(s):  
Soliman Eman M ◽  
Elgayar Ibrahim L ◽  
Kamar A Adel A
Keyword(s):  
Composite Resin ◽  
In Vitro Study ◽  
Vitro Study

In-vivo and in-vitro study of control of rat skin optical properties by action of 40%-glucose solution

2001 ◽  
Author(s):  
Alexey N. Bashkatov ◽  
Elina A. Genina ◽  
Irina V. Korovina ◽  
Yurii P. Sinichkin ◽  
Olga V. Novikova ◽  
...  
Keyword(s):  
Optical Properties ◽  
Glucose Solution ◽  
In Vitro Study ◽  
Vitro Study ◽  
Rat Skin
Sign in / Sign up

Export Citation Format

Share Document